High-strength steel

EN-Product-Hot-Rolled-HSS-S315MC TSUK

S315MC

Specification details for S315MC

EN-Product-Hot-Rolled-HSS-All grades Overview TSUK

Overview

Our high-strength steel grades have been developed to meet a wide variety of applications. The consistent quality of these steels means they can be relied on to deliver benefits for your end-products and processes.

Applications

Agricultural machinery
Chassis and suspension components and assemblies
Containers
Cranes and crane booms
Earth-moving equipment
Lightweight towers
Radiator components
Safety-critical applications
Racking and shelving
Telescopic booms
Tow hooks
Train carriages

Relationship with standards

Tata Steel’s high-strength low-alloy steels comply with the following standards:

EN 10149-2: 2013	EN 10025-2: 2004	VDA	Tata Steel	Tata Steel	Germany SEW 092
Grade	Grade	Grade	Grade	Grade*	Grade
S315MC	-	HR300LA	Tenform XF315	Ympress S315MC	QStE340TM
S355MC	-	HR340LA	Tenform XF355	Ympress S355MC	QStE380TM
S420MC	-	HR420LA	Tenform XF420	Ympress S420MC	QStE460TM
S460MC	-	HR460LA	Tenform XF460	Ympress S460MC	QStE500TM
S500MC	-	HR500LA	Tenform XF500	Ympress S500MC	QStE550TM
S550MC*	-	-	-	Ympress S550MC	-
S650MC*	-	-	-	Ympress S650MC	-
-	-	-	-	Ympress E690TM	QStE690TM
S700MC*	-	HR700LA	-	Ympress S700MC	-
S960MC*	-	HR960LA	-	Ympress S960MC	-
-	S235J2C+N	-	-	-	-
-	S235J0C+N	-	-	-	-
-	S235JRC+AR	-	-	-	-

*For products produced in the Netherlands click here.

Supply - product conditions

Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:

Side/surface condition	non-pickled	pickled	pickled and oiled
Mill edges	Yes	Yes	Yes
Trimmed edges	-	Yes	Yes

Trimmed edges available in thicknesses up to 5.0 mm.
Please contact us regarding other specifications we may have that meet your needs.

Surface aspects

Description	Availability
Surface finish	Coils are available in non-pickled and pickled finish for most grades. For grade specific availability, please refer to the dimensional tables.
Oiling	Pickled finish is available with rolling or preservative oil applied. Oil weight normally 0.4-1.8 g/m²

Alternative oiling ranges are available.
Please contact us for details.

Certification

Test certificates 2.2/3.1 are available according to EN 10204.

EN-Product-Hot-rolled-All grades Surface aspects Supply Conditions TSUK

Supply Conditions

Supply - product conditions

Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:

Side/surface condition	non-pickled	pickled	pickled and oiled
Mill edges	Yes	Yes	Yes
Trimmed edges	-	Yes	Yes

Trimmed edges available in thicknesses up to 5.0 mm.
Please contact us regarding other specifications we may have that meet your needs.

Surface aspects

Description	Availability
Surface finish	Coils are available in non-pickled and pickled finish for most grades. For grade specific availability, please refer to the dimensional tables.
Oiling	Pickled finish is available with rolling or preservative oil applied. Oil weight normally 0.4-1.8 g/m²

Alternative oiling ranges are available.
Please contact us for details.

Certification

Test certificates 2.2/3.1 are available according to EN 10204.

EN-Product-Hot-Rolled-HSS-S315MC-Properties TSUK

Properties

Mechanical Properties

Steel supplied will comply with the mechanical property limits below.
The values of the tensile test apply to test bars parallel to the rolling direction.
The values of the bend test apply to test bars transverse to the rolling direction.

EN 10149-2: 2013	Grade	S315MC
Min. Yield strength R_eH1 (N/mm²)		315
Tensile strength R_m (N/mm²)		390 - 510
Elongation (%)	t < 3	20
	3 ≤ t < 5	24
	t ≥ 5	24
Min. bend test diameter	t < 5	0 t
Min. bend test diameter	t ≥ 5	0 t

^1. Upper yield strength or 0.2% proof stress applies.
Elongation after fracture A uses test piece length L₀ = 80 mm for t < 3 mm. L₀ = 5.65√S₀ for t ≥ 3 mm.
t – material thickness in mm

Impact strength

Impact tests can be performed for thicknesses ≥ 6.0 mm. Please contact us for details.

Chemical composition

Steel supplied will comply with the chemical limits below.

EN 10149-2: 2013	Grade	S315MC
C	Max.	0.12
Mn	Max.	1.3
P	Max.	0.025
S	Max.	0.020
Si	Max.	0.50
Al_tot	Min.	0.015
Nb	Max. ¹	0.09
V	Max. ¹	0.20
Ti	Max. ¹	0.15
Mo	Max.	-
Cu	Max.	-

^1. The sum of Nb, V and Ti shall be max. 0.22%.
All values are in weight%

EN-Product-Hot-Rolled-HSS-S315MC-Dimensions TSUK

Dimensions

Dimensional capability - non-pickled

Dimensions in mm.

Thickness	Max. width
From - up to	S315MC
1.80 - 2.00	1300
2.00 - 2.20	1350
2.20 - 2.40	1370
2.40 - 3.00	1530
3.00 - 5.00	1560
5.00 - 6.00	1600
6.00 - 12.50	1610

The minimum width is 900 mm.
For products produced in the Netherlands click here.

Dimensional capability - pickled

Dimensions in mm.

Thickness	Max. width
From - up to	S315MC
1.80 - 2.00	1300
2.00 - 2.20	1350
2.20 - 2.40	1370
2.40 - 5.00	1530

The minimum width is 900 mm.
For products produced in the Netherlands click here.

Tolerances

Tolerances for wide strip and slit wide strip comply with standard EN 10051: 2010.
Tighter tolerances are available, please contact us.

EN-Product-Hot-rolled-All grades Shape and dimensional tolerances TSUK

Shape and dimensional tolerances

The specified values for wide strip do not apply to the uncropped ends of the coil (‘head’ and ‘tail’). The length of these uncropped ends is calculated using the following formula:

length (in metres) = 90/nominal thickness (in mm), with a maximum of 20 metres.

If required, this part of the coil can be removed, however an additional cost may be charged for this.

Tolerances on thickness

Tata Steel can supply to full thickness tolerance specified in EN 10051:2010.

Tighter tolerances are available as shown below:

Product family	Thickness tolerances available (% of full EN 10051:2010 tolerance)
	100%	75%	66%	50%
Steel for forming	Yes	Yes	Yes	(see note 1)
High-strength low-alloy (HSLA)	Yes	Yes	Yes	Yes
AHSS	Yes	Yes	Yes	Yes
Structural steel	Yes	Yes	Yes	Yes
Boron manganese steel	Yes	Yes	Yes
Steel for gas cylinders	Yes

¹ Please contact us for tolerances below 66%
Please contact us on the availability of special tolerances to meet your requirements.

Tolerances on thickness for hot-rolled steel with a low carbon content for cold forming
(DD11-DD14 in EN 10111:2008)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.13	± 0.14	± 0.16	-
> 2.00	≤ 2.50	± 0.14	± 0.16	± 0.17	± 0.19
> 2.50	≤ 3.00	± 0.15	± 0.17	± 0.18	± 0.20
> 3.00	≤ 4.00	± 0.17	± 0.18	± 0.20	± 0.20
> 4.00	≤ 5.00	± 0.18	± 0.20	± 0.21	± 0.22
> 5.00	≤ 6.00	± 0.20	± 0.21	± 0.22	± 0.23
> 6.00	≤ 8.00	± 0.22	± 0.23	± 0.23	± 0.26
> 8.00	≤ 11.00	± 0.24	± 0.25	± 0.25	± 0.28

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum yield strength
R_e ≤ 300 N/mm² (category A)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.17	± 0.19	± 0.21	-
> 2.00	≤ 2.50	± 0.18	± 0.21	± 0.23	± 0.25
> 2.50	≤ 3.00	± 0.20	± 0.22	± 0.24	± 0.26
> 3.00	≤ 4.00	± 0.22	± 0.24	± 0.26	± 0.27
> 4.00	≤ 5.00	± 0.24	± 0.26	± 0.28	± 0.29
> 5.00	≤ 6.00	± 0.26	± 0.28	± 0.29	± 0.31
> 6.00	≤ 8.00	± 0.29	± 0.30	± 0.31	± 0.35
> 8.00	≤ 10.00	± 0.32	± 0.33	± 0.34	± 0.40
> 10.00	≤ 12.50	± 0.35	± 0.36	± 0.37	± 0.43
> 12.50	≤ 15.00	± 0.37	± 0.38	± 0.40	± 0.46
> 15.00	≤ 25.00	± 0.40	± 0.42	± 0.45	± 0.50

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum yield strength
300 N/mm² < R_e ≤ 360 N/mm² (category B)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.20	± 0.22	± 0.24	-
> 2.00	≤ 2.50	± 0.21	± 0.24	± 0.26	± 0.29
> 2.50	≤ 3.00	± 0.23	± 0.25	± 0.28	± 0.30
> 3.00	≤ 4.00	± 0.25	± 0.28	± 0.30	± 0.31
> 4.00	≤ 5.00	± 0.28	± 0.30	± 0.32	± 0.33
> 5.00	≤ 6.00	± 0.30	± 0.32	± 0.33	± 0.36
> 6.00	≤ 8.00	± 0.33	± 0.35	± 0.36	± 0.40
> 8.00	≤ 10.00	± 0.37	± 0.38	± 0.39	± 0.46
> 10.00	≤ 12.50	± 0.40	± 0.41	± 0.43	± 0.49
> 12.50	≤ 15.00	± 0.43	± 0.44	± 0.46	± 0.53
> 15.00	≤ 25.00	± 0.46	± 0.48	± 0.52	± 0.58

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum yield strength
360 N/mm² < R_e ≤ 420 N/mm² (category C)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.22	± 0.25	± 0.27	-
> 2.00	≤ 2.50	± 0.23	± 0.27	± 0.30	± 0.33
> 2.50	≤ 3.00	± 0.26	± 0.29	± 0.31	± 0.34
> 3.00	≤ 4.00	± 0.29	± 0.31	± 0.34	± 0.35
> 4.00	≤ 5.00	± 0.31	± 0.34	± 0.36	± 0.38
> 5.00	≤ 6.00	± 0.34	± 0.36	± 0.38	± 0.40
> 6.00	≤ 8.00	± 0.38	± 0.39	± 0.40	± 0.46
> 8.00	≤ 10.00	± 0.42	± 0.43	± 0.44	± 0.52
> 10.00	≤ 12.50	± 0.46	± 0.47	± 0.48	± 0.56
> 12.50	≤ 15.00	± 0.48	± 0.49	± 0.52	± 0.60
> 15.00	≤ 25.00	± 0.52	± 0.55	± 0.59	± 0.65

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum yield strength
420 N/mm² < R_e ≤ 900 N/mm² (category D)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.24	± 0.27	± 0.29	-
> 2.00	≤ 2.50	± 0.25	± 0.29	± 0.32	± 0.35
> 2.50	≤ 3.00	± 0.28	± 0.31	± 0.34	± 0.36
> 3.00	≤ 4.00	± 0.31	± 0.34	± 0.36	± 0.38
> 4.00	≤ 5.00	± 0.34	± 0.36	± 0.39	± 0.41
> 5.00	≤ 6.00	± 0.36	± 0.39	± 0.41	± 0.43
> 6.00	≤ 8.00	± 0.41	± 0.42	± 0.43	± 0.49
> 8.00	≤ 10.00	± 0.45	± 0.46	± 0.48	± 0.56
> 10.00	≤ 12.50	± 0.49	± 0.50	± 0.52	± 0.60
> 12.50	≤ 15.00	± 0.52	± 0.53	± 0.56	± 0.64
> 15.00	≤ 25.00	± 0.56	± 0.59	± 0.63	± 0.70

All dimensions are mm.

Tolerances on width

Tolerances in mm.

Nominal width w
	Mill edges		Trimmed edges
	lower	upper	lower	upper
w ≤ 1200	0	20	0	3
1200 < w ≤ 1850	0	20	0	5
w > 1850	0	25	0	6

Tolerances in mm for wide strip and slit wide strip
The tolerances for wide strip and slit wide strip comply with standard EN 10051:2010.

The specified values for wide strip do not apply to the uncropped ends of the coil (‘head’ and ‘tail’). The length of these uncropped ends is calculated using the following formula:
length (in metres) = 90/nominal thickness (in mm), with a maximum of 20 metres.

If required, this part of the coil can be removed, however an additional cost may be charged for this.

Edge camber

The deviation from the edge over a length of 5000mm:

• with mill edges, no more than 20mm
• with trimmed edges, no more than 15mm

Flatness

Requirements as regards flatness can be agreed at the time of enquiry.

Option for maximum crown values

The following high crown C40 options available for hot-rolled products.

Crown values on the C20-position as well as minimum crown values on both C20 and C40 position are also available on request.

Maximum Crown C40 in µm values for hot-rolled steel with a low carbon content for cold forming
(DD11-DD14 in EN 10111:2008)

Category 1		C40
Nominal Thickness		≤ 1200	> 1200	> 1500	> 1800
Nominal Thickness		≤ 1200	≤ 1500	≤ 1800	> 1800
> 1.47	≤ 2.00	40	40	40	40
> 2.00	≤ 2.50	40	40	50	50
> 2.50	≤ 3.00	40	40	50	50
> 3.00	≤ 6.00	40	50	50	50
> 6.00	≤ 11.00	50	50	50	50

Maximum Crown C40 in µm values of structural steel grades
(S185-S235-S275 ≤ 10mm in EN 10025-2:2004)

Category 2		C40
Nominal Thickness		≤ 1200	> 1200	> 1500	> 1800
Nominal Thickness		≤ 1200	≤ 1500	≤ 1800	> 1800
> 1.47	≤ 2.00	40	40	40	40
> 2.00	≤ 2.50	40	40	50	50
> 2.50	≤ 20.00	50	50	50	50

Maximum Crown C40 in µm values of structural steel grades(S275 > 10mm in EN 10025-2:2004)
and HSLA grades (S315MC in EN 10149-2:1996)

Category 3		C40
Nominal Thickness		≤ 1200	> 1200	> 1500	> 1800
Nominal Thickness		≤ 1200	≤ 1500	≤ 1800	> 1800
> 1.47	≤ 2.00	50	50	60	60
> 2.00	≤ 2.50	50	60	60	60
> 2.50	≤ 3.00	50	60	60	60
> 3.00	≤ 20.00	60	60	70	70

Maximum Crown C40 in µm values of HSLA grades
(S355MC, S420MC, S460MC, S500MC, S550MC in EN 10149-2:1996)

Category 4		C40
Nominal Thickness		≤ 1200	> 1200	> 1500	> 1800
Nominal Thickness		≤ 1200	≤ 1500	≤ 1800	> 1800
> 1.47	≤ 2.00	60	70	70	70
> 2.00	≤ 2.50	60	70	80	80
> 2.50	≤ 3.00	60	70	80	80
> 3.00	≤ 5.00	70	70	80	80
> 5.00	≤ 20.00	80	80	80	80

Dimensions and coil weights

Tata Steel can supply hot-rolled steels with the following minimum and maximum dimensions and weights:

Description	Availability
Coil diameter inner non-pickled	762mm
Coil diameter inner pickled	610mm standard
Tolerance on inner diameter	+0/-50mm
Coil diameter outer non-pickled	Outer diameter available is 10/7 x width
	to reduce possibility of coil tipping over
	Max. 2200mm
	Min. 1050mm
Coil diameter outer pickled and oiled	Outer diameter available is 10/7 x width
	to reduce possibility of coil tipping over
	Outer diameter
	limit 2200mm
	Min. 1050mm
Coil weight	Max. 32 tonnes
	Additional maximum limits from transport
	limits and outer coil diameter
	Some HR products may have different
	coil weight ranges
Minimum tonnage per order	Please refer to price list for order quantity details
Minimum tonnage per order	Minimum order quantities may apply

EN-Product-Hot-rolled-Heavy+Light further processing TSUK

Further processing

We have a broad network of Tata Steel service centres across Europe, offering decoiling and slitting services from stock and against short lead times.

Heavy gauge processing

Processing type	Decoiling
Thickness range (mm)	1.4 - 25.4
Width range (mm)	300 - 2600
Length range	up to 18.4m
Locations	UK Netherlands

Light gauge processing

Processing type	Slitting	Decoiling	Blanking
Thickness range (mm)	0.2 - 7.0	0.3 - 6.0	0.3 - 6.0
Width range (mm)	10 - 2050	50 - 2600	200 - 2600
Length range	-	up to 6m	up to 6m
Locations	UK Ireland Netherlands Germany France Spain Sweden Norway Finland	UK Ireland Netherlands Germany France Spain Sweden Norway Finland	UK Ireland

For further information please visit our Service Centre webpages.

EN-Product-Hot-Rolled-HSS-S420MC TSUK

S420MC

Specification details for S420MC

EN-Product-Hot-Rolled-HSS-All grades Overview TSUK

Overview

Our high-strength steel grades have been developed to meet a wide variety of applications. The consistent quality of these steels means they can be relied on to deliver benefits for your end-products and processes.

Applications

Agricultural machinery
Chassis and suspension components and assemblies
Containers
Cranes and crane booms
Earth-moving equipment
Lightweight towers
Radiator components
Safety-critical applications
Racking and shelving
Telescopic booms
Tow hooks
Train carriages

Relationship with standards

Tata Steel’s high-strength low-alloy steels comply with the following standards:

EN 10149-2: 2013	EN 10025-2: 2004	VDA	Tata Steel	Tata Steel	Germany SEW 092
Grade	Grade	Grade	Grade	Grade*	Grade
S315MC	-	HR300LA	Tenform XF315	Ympress S315MC	QStE340TM
S355MC	-	HR340LA	Tenform XF355	Ympress S355MC	QStE380TM
S420MC	-	HR420LA	Tenform XF420	Ympress S420MC	QStE460TM
S460MC	-	HR460LA	Tenform XF460	Ympress S460MC	QStE500TM
S500MC	-	HR500LA	Tenform XF500	Ympress S500MC	QStE550TM
S550MC*	-	-	-	Ympress S550MC	-
S650MC*	-	-	-	Ympress S650MC	-
-	-	-	-	Ympress E690TM	QStE690TM
S700MC*	-	HR700LA	-	Ympress S700MC	-
S960MC*	-	HR960LA	-	Ympress S960MC	-
-	S235J2C+N	-	-	-	-
-	S235J0C+N	-	-	-	-
-	S235JRC+AR	-	-	-	-

*For products produced in the Netherlands click here.

Supply - product conditions

Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:

Side/surface condition	non-pickled	pickled	pickled and oiled
Mill edges	Yes	Yes	Yes
Trimmed edges	-	Yes	Yes

Trimmed edges available in thicknesses up to 5.0 mm.
Please contact us regarding other specifications we may have that meet your needs.

Surface aspects

Description	Availability
Surface finish	Coils are available in non-pickled and pickled finish for most grades. For grade specific availability, please refer to the dimensional tables.
Oiling	Pickled finish is available with rolling or preservative oil applied. Oil weight normally 0.4-1.8 g/m²

Alternative oiling ranges are available.
Please contact us for details.

Certification

Test certificates 2.2/3.1 are available according to EN 10204.

EN-Product-Hot-rolled-All grades Surface aspects Supply Conditions TSUK

Supply Conditions

Supply - product conditions

Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:

Side/surface condition	non-pickled	pickled	pickled and oiled
Mill edges	Yes	Yes	Yes
Trimmed edges	-	Yes	Yes

Trimmed edges available in thicknesses up to 5.0 mm.
Please contact us regarding other specifications we may have that meet your needs.

Surface aspects

Description	Availability
Surface finish	Coils are available in non-pickled and pickled finish for most grades. For grade specific availability, please refer to the dimensional tables.
Oiling	Pickled finish is available with rolling or preservative oil applied. Oil weight normally 0.4-1.8 g/m²

Alternative oiling ranges are available.
Please contact us for details.

Certification

Test certificates 2.2/3.1 are available according to EN 10204.

EN-Product-Hot-Rolled-HSS-S420MC-Properties TSUK

Properties

Mechanical Properties

Steel supplied will comply with the mechanical property limits below.
The values of the tensile test apply to test bars parallel to the rolling direction.
The values of the bend test apply to test bars transverse to the rolling direction.

Grade		S420MC
Min. Yield strength R_eH¹	N/mm²	420
Tensile strength Rm	N/mm²	480 - 620
Min. elongation after fracture A%	t < 3	16
	3 ≤ t < 5	19
	t ≥ 5	19
Min. bend test diameter	t < 5	0.5 t
Min. bend test diameter	t ≥ 5	0.5 t

^1. Upper yield strength or 0.2% proof stress applies.
t – material thickness in mm.
Elongation test piece length L₀ = 80 mm for t < 3 mm. L₀ = 5.65√S₀ for t ≥ 3 mm.

Impact strength

Impact tests can be performed for thicknesses ≥ 6.0 mm. Please contact us for details.

Chemical composition

Steel supplied will comply with the chemical limits below.

Grade		S420MC
C	Max.	0.12
Mn	Max.	1.6
P	Max.	0.025
S	Max.	0.015
Si	Max.	0.5
Al_tot	Min.	0.015
Nb	Max. ¹	0.09
V	Max. ¹	0.2
Ti	Max. ¹	0.15
Mo	Max.	-
Cu	Max.	-

^1. The sum of Nb, V and Ti shall be max. 0.22%.
All values are in weight%

EN-Product-Hot-Rolled-HSS-S420MC-Dimensions TSUK

Dimensions

Dimensional capability - non-pickled

Dimensions in mm.

Thickness	Max. width
From - up to	S420MC
1.80 - 1.90	1410
1.90 - 2.10	1510
2.10 - 2.50	1600
2.20 - 2.40	1530
2.50 - 16.50	1830

The minimum width is 900 mm.
Other dimensions may be available - please contact us.
For products produced in the Netherlands click here.

Dimensional capability - pickled

Dimensions in mm.

Thickness	Max. width
From - up to	S420MC
1.80 - 1.90	1410
1.90 - 2.10	1510
2.10 - 5.00	1530

The minimum width is 900 mm.
Other dimensions may be available - please contact us.
For products produced in the Netherlands click here.

Tolerances

Tolerances for wide strip and slit wide strip comply with standard EN 10051: 2010.
Tighter tolerances are available, please contact us.

EN-Product-Hot-rolled-All grades Shape and dimensional tolerances TSUK

Shape and dimensional tolerances

The specified values for wide strip do not apply to the uncropped ends of the coil (‘head’ and ‘tail’). The length of these uncropped ends is calculated using the following formula:

length (in metres) = 90/nominal thickness (in mm), with a maximum of 20 metres.

If required, this part of the coil can be removed, however an additional cost may be charged for this.

Tolerances on thickness

Tata Steel can supply to full thickness tolerance specified in EN 10051:2010.

Tighter tolerances are available as shown below:

Product family	Thickness tolerances available (% of full EN 10051:2010 tolerance)
	100%	75%	66%	50%
Steel for forming	Yes	Yes	Yes	(see note 1)
High-strength low-alloy (HSLA)	Yes	Yes	Yes	Yes
AHSS	Yes	Yes	Yes	Yes
Structural steel	Yes	Yes	Yes	Yes
Boron manganese steel	Yes	Yes	Yes
Steel for gas cylinders	Yes

¹ Please contact us for tolerances below 66%
Please contact us on the availability of special tolerances to meet your requirements.

Tolerances on thickness for hot-rolled steel with a low carbon content for cold forming
(DD11-DD14 in EN 10111:2008)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.13	± 0.14	± 0.16	-
> 2.00	≤ 2.50	± 0.14	± 0.16	± 0.17	± 0.19
> 2.50	≤ 3.00	± 0.15	± 0.17	± 0.18	± 0.20
> 3.00	≤ 4.00	± 0.17	± 0.18	± 0.20	± 0.20
> 4.00	≤ 5.00	± 0.18	± 0.20	± 0.21	± 0.22
> 5.00	≤ 6.00	± 0.20	± 0.21	± 0.22	± 0.23
> 6.00	≤ 8.00	± 0.22	± 0.23	± 0.23	± 0.26
> 8.00	≤ 11.00	± 0.24	± 0.25	± 0.25	± 0.28

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum yield strength
R_e ≤ 300 N/mm² (category A)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.17	± 0.19	± 0.21	-
> 2.00	≤ 2.50	± 0.18	± 0.21	± 0.23	± 0.25
> 2.50	≤ 3.00	± 0.20	± 0.22	± 0.24	± 0.26
> 3.00	≤ 4.00	± 0.22	± 0.24	± 0.26	± 0.27
> 4.00	≤ 5.00	± 0.24	± 0.26	± 0.28	± 0.29
> 5.00	≤ 6.00	± 0.26	± 0.28	± 0.29	± 0.31
> 6.00	≤ 8.00	± 0.29	± 0.30	± 0.31	± 0.35
> 8.00	≤ 10.00	± 0.32	± 0.33	± 0.34	± 0.40
> 10.00	≤ 12.50	± 0.35	± 0.36	± 0.37	± 0.43
> 12.50	≤ 15.00	± 0.37	± 0.38	± 0.40	± 0.46
> 15.00	≤ 25.00	± 0.40	± 0.42	± 0.45	± 0.50

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum yield strength
300 N/mm² < R_e ≤ 360 N/mm² (category B)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.20	± 0.22	± 0.24	-
> 2.00	≤ 2.50	± 0.21	± 0.24	± 0.26	± 0.29
> 2.50	≤ 3.00	± 0.23	± 0.25	± 0.28	± 0.30
> 3.00	≤ 4.00	± 0.25	± 0.28	± 0.30	± 0.31
> 4.00	≤ 5.00	± 0.28	± 0.30	± 0.32	± 0.33
> 5.00	≤ 6.00	± 0.30	± 0.32	± 0.33	± 0.36
> 6.00	≤ 8.00	± 0.33	± 0.35	± 0.36	± 0.40
> 8.00	≤ 10.00	± 0.37	± 0.38	± 0.39	± 0.46
> 10.00	≤ 12.50	± 0.40	± 0.41	± 0.43	± 0.49
> 12.50	≤ 15.00	± 0.43	± 0.44	± 0.46	± 0.53
> 15.00	≤ 25.00	± 0.46	± 0.48	± 0.52	± 0.58

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum yield strength
360 N/mm² < R_e ≤ 420 N/mm² (category C)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.22	± 0.25	± 0.27	-
> 2.00	≤ 2.50	± 0.23	± 0.27	± 0.30	± 0.33
> 2.50	≤ 3.00	± 0.26	± 0.29	± 0.31	± 0.34
> 3.00	≤ 4.00	± 0.29	± 0.31	± 0.34	± 0.35
> 4.00	≤ 5.00	± 0.31	± 0.34	± 0.36	± 0.38
> 5.00	≤ 6.00	± 0.34	± 0.36	± 0.38	± 0.40
> 6.00	≤ 8.00	± 0.38	± 0.39	± 0.40	± 0.46
> 8.00	≤ 10.00	± 0.42	± 0.43	± 0.44	± 0.52
> 10.00	≤ 12.50	± 0.46	± 0.47	± 0.48	± 0.56
> 12.50	≤ 15.00	± 0.48	± 0.49	± 0.52	± 0.60
> 15.00	≤ 25.00	± 0.52	± 0.55	± 0.59	± 0.65

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum yield strength
420 N/mm² < R_e ≤ 900 N/mm² (category D)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.24	± 0.27	± 0.29	-
> 2.00	≤ 2.50	± 0.25	± 0.29	± 0.32	± 0.35
> 2.50	≤ 3.00	± 0.28	± 0.31	± 0.34	± 0.36
> 3.00	≤ 4.00	± 0.31	± 0.34	± 0.36	± 0.38
> 4.00	≤ 5.00	± 0.34	± 0.36	± 0.39	± 0.41
> 5.00	≤ 6.00	± 0.36	± 0.39	± 0.41	± 0.43
> 6.00	≤ 8.00	± 0.41	± 0.42	± 0.43	± 0.49
> 8.00	≤ 10.00	± 0.45	± 0.46	± 0.48	± 0.56
> 10.00	≤ 12.50	± 0.49	± 0.50	± 0.52	± 0.60
> 12.50	≤ 15.00	± 0.52	± 0.53	± 0.56	± 0.64
> 15.00	≤ 25.00	± 0.56	± 0.59	± 0.63	± 0.70

All dimensions are mm.

Tolerances on width

Tolerances in mm.

Nominal width w
	Mill edges		Trimmed edges
	lower	upper	lower	upper
w ≤ 1200	0	20	0	3
1200 < w ≤ 1850	0	20	0	5
w > 1850	0	25	0	6

Tolerances in mm for wide strip and slit wide strip
The tolerances for wide strip and slit wide strip comply with standard EN 10051:2010.

The specified values for wide strip do not apply to the uncropped ends of the coil (‘head’ and ‘tail’). The length of these uncropped ends is calculated using the following formula:
length (in metres) = 90/nominal thickness (in mm), with a maximum of 20 metres.

If required, this part of the coil can be removed, however an additional cost may be charged for this.

Edge camber

The deviation from the edge over a length of 5000mm:

• with mill edges, no more than 20mm
• with trimmed edges, no more than 15mm

Flatness

Requirements as regards flatness can be agreed at the time of enquiry.

Option for maximum crown values

The following high crown C40 options available for hot-rolled products.

Crown values on the C20-position as well as minimum crown values on both C20 and C40 position are also available on request.

Maximum Crown C40 in µm values for hot-rolled steel with a low carbon content for cold forming
(DD11-DD14 in EN 10111:2008)

Category 1		C40
Nominal Thickness		≤ 1200	> 1200	> 1500	> 1800
Nominal Thickness		≤ 1200	≤ 1500	≤ 1800	> 1800
> 1.47	≤ 2.00	40	40	40	40
> 2.00	≤ 2.50	40	40	50	50
> 2.50	≤ 3.00	40	40	50	50
> 3.00	≤ 6.00	40	50	50	50
> 6.00	≤ 11.00	50	50	50	50

Maximum Crown C40 in µm values of structural steel grades
(S185-S235-S275 ≤ 10mm in EN 10025-2:2004)

Category 2		C40
Nominal Thickness		≤ 1200	> 1200	> 1500	> 1800
Nominal Thickness		≤ 1200	≤ 1500	≤ 1800	> 1800
> 1.47	≤ 2.00	40	40	40	40
> 2.00	≤ 2.50	40	40	50	50
> 2.50	≤ 20.00	50	50	50	50

Maximum Crown C40 in µm values of structural steel grades(S275 > 10mm in EN 10025-2:2004)
and HSLA grades (S315MC in EN 10149-2:1996)

Category 3		C40
Nominal Thickness		≤ 1200	> 1200	> 1500	> 1800
Nominal Thickness		≤ 1200	≤ 1500	≤ 1800	> 1800
> 1.47	≤ 2.00	50	50	60	60
> 2.00	≤ 2.50	50	60	60	60
> 2.50	≤ 3.00	50	60	60	60
> 3.00	≤ 20.00	60	60	70	70

Maximum Crown C40 in µm values of HSLA grades
(S355MC, S420MC, S460MC, S500MC, S550MC in EN 10149-2:1996)

Category 4		C40
Nominal Thickness		≤ 1200	> 1200	> 1500	> 1800
Nominal Thickness		≤ 1200	≤ 1500	≤ 1800	> 1800
> 1.47	≤ 2.00	60	70	70	70
> 2.00	≤ 2.50	60	70	80	80
> 2.50	≤ 3.00	60	70	80	80
> 3.00	≤ 5.00	70	70	80	80
> 5.00	≤ 20.00	80	80	80	80

Dimensions and coil weights

Tata Steel can supply hot-rolled steels with the following minimum and maximum dimensions and weights:

Description	Availability
Coil diameter inner non-pickled	762mm
Coil diameter inner pickled	610mm standard
Tolerance on inner diameter	+0/-50mm
Coil diameter outer non-pickled	Outer diameter available is 10/7 x width
	to reduce possibility of coil tipping over
	Max. 2200mm
	Min. 1050mm
Coil diameter outer pickled and oiled	Outer diameter available is 10/7 x width
	to reduce possibility of coil tipping over
	Outer diameter
	limit 2200mm
	Min. 1050mm
Coil weight	Max. 32 tonnes
	Additional maximum limits from transport
	limits and outer coil diameter
	Some HR products may have different
	coil weight ranges
Minimum tonnage per order	Please refer to price list for order quantity details
Minimum tonnage per order	Minimum order quantities may apply

EN-Product-Hot-rolled-Heavy+Light further processing TSUK

Further processing

We have a broad network of Tata Steel service centres across Europe, offering decoiling and slitting services from stock and against short lead times.

Heavy gauge processing

Processing type	Decoiling
Thickness range (mm)	1.4 - 25.4
Width range (mm)	300 - 2600
Length range	up to 18.4m
Locations	UK Netherlands

Light gauge processing

Processing type	Slitting	Decoiling	Blanking
Thickness range (mm)	0.2 - 7.0	0.3 - 6.0	0.3 - 6.0
Width range (mm)	10 - 2050	50 - 2600	200 - 2600
Length range	-	up to 6m	up to 6m
Locations	UK Ireland Netherlands Germany France Spain Sweden Norway Finland	UK Ireland Netherlands Germany France Spain Sweden Norway Finland	UK Ireland

For further information please visit our Service Centre webpages.

EN-Product-Hot-Rolled-HSS-S355MC TSUK

S355MC

Specification details for S355MC

EN-Product-Hot-Rolled-HSS-All grades Overview TSUK

Overview

Our high-strength steel grades have been developed to meet a wide variety of applications. The consistent quality of these steels means they can be relied on to deliver benefits for your end-products and processes.

Applications

Agricultural machinery
Chassis and suspension components and assemblies
Containers
Cranes and crane booms
Earth-moving equipment
Lightweight towers
Radiator components
Safety-critical applications
Racking and shelving
Telescopic booms
Tow hooks
Train carriages

Relationship with standards

Tata Steel’s high-strength low-alloy steels comply with the following standards:

EN 10149-2: 2013	EN 10025-2: 2004	VDA	Tata Steel	Tata Steel	Germany SEW 092
Grade	Grade	Grade	Grade	Grade*	Grade
S315MC	-	HR300LA	Tenform XF315	Ympress S315MC	QStE340TM
S355MC	-	HR340LA	Tenform XF355	Ympress S355MC	QStE380TM
S420MC	-	HR420LA	Tenform XF420	Ympress S420MC	QStE460TM
S460MC	-	HR460LA	Tenform XF460	Ympress S460MC	QStE500TM
S500MC	-	HR500LA	Tenform XF500	Ympress S500MC	QStE550TM
S550MC*	-	-	-	Ympress S550MC	-
S650MC*	-	-	-	Ympress S650MC	-
-	-	-	-	Ympress E690TM	QStE690TM
S700MC*	-	HR700LA	-	Ympress S700MC	-
S960MC*	-	HR960LA	-	Ympress S960MC	-
-	S235J2C+N	-	-	-	-
-	S235J0C+N	-	-	-	-
-	S235JRC+AR	-	-	-	-

*For products produced in the Netherlands click here.

Supply - product conditions

Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:

Side/surface condition	non-pickled	pickled	pickled and oiled
Mill edges	Yes	Yes	Yes
Trimmed edges	-	Yes	Yes

Trimmed edges available in thicknesses up to 5.0 mm.
Please contact us regarding other specifications we may have that meet your needs.

Surface aspects

Description	Availability
Surface finish	Coils are available in non-pickled and pickled finish for most grades. For grade specific availability, please refer to the dimensional tables.
Oiling	Pickled finish is available with rolling or preservative oil applied. Oil weight normally 0.4-1.8 g/m²

Alternative oiling ranges are available.
Please contact us for details.

Certification

Test certificates 2.2/3.1 are available according to EN 10204.

EN-Product-Hot-rolled-All grades Surface aspects Supply Conditions TSUK

Supply Conditions

Supply - product conditions

Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:

Side/surface condition	non-pickled	pickled	pickled and oiled
Mill edges	Yes	Yes	Yes
Trimmed edges	-	Yes	Yes

Trimmed edges available in thicknesses up to 5.0 mm.
Please contact us regarding other specifications we may have that meet your needs.

Surface aspects

Description	Availability
Surface finish	Coils are available in non-pickled and pickled finish for most grades. For grade specific availability, please refer to the dimensional tables.
Oiling	Pickled finish is available with rolling or preservative oil applied. Oil weight normally 0.4-1.8 g/m²

Alternative oiling ranges are available.
Please contact us for details.

Certification

Test certificates 2.2/3.1 are available according to EN 10204.

EN-Product-Hot-Rolled-HSS-S355MC-Properties TSUK

Properties

Mechanical Properties

Steel supplied will comply with the mechanical property limits below.
The values of the tensile test apply to test bars parallel to the rolling direction.
The values of the bend test apply to test bars transverse to the rolling direction.

EN 10149-2: 2013	Grade	S355MC
Min. Yield strength R_eH¹ (N/mm²)		355
Tensile strength R_m (N/mm²)		430 - 550
Elongation (%)	t < 3	19
	3 ≤ t < 5	23
	t ≥ 5	23
Min. bend test diameter	t < 5	0.5 t
Min. bend test diameter	t ≥ 5	0.5 t

^1. Upper yield strength or 0.2% proof stress applies.
t – material thickness in mm.
Elongation after fracture A uses test piece length L₀ = 80 mm for t < 3 mm. L₀ = 5.65√S₀ for t ≥ 3 mm.

Impact strength

For S355MC, a guaranteed Charpy impact strength of 40J at -20°C in longitudinal direction is available.
Impact tests can be performed for thicknesses ≥ 6.0 mm. Please contact us for details.

Chemical composition

Steel supplied will comply with the chemical limits below.

EN 10149-2: 2013	Grade	S355MC
C	Max.	0.12
Mn	Max.	1.5
P	Max.	0.025
S	Max.	0.02
Si	Max.	0.5
Altot	Min.	0.015
Nb	Max. ¹	0.09
V	Max. ¹	0.2
Ti	Max. ¹	0.15
Mo	Max.	-
Cu	Max.	-

^1. The sum of Nb, V and Ti shall be max. 0.22%.
All values are in weight%

EN-Product-Hot-Rolled-HSS-S355MC-Dimensions TSUK

Dimensions

Dimensional capability - non-pickled

Dimensions in mm.

Thickness	Max. width
From - up to	S355MC
1.80 - 2.00	1300
2.00 - 2.20	1350
2.20 - 2.40	1370
2.40 - 2.80	1530
2.80 - 5.00	1560
5.00 - 6.00	1600
6.00 - 12.50	1610

The minimum width is 900 mm.
For products produced in the Netherlands click here.

Dimensional capability - pickled

Dimensions in mm.

Thickness	Max. width
From - up to	S355MC
1.80 - 1.20	1300
2.00 - 2.20	1350
2.20 - 2.40	1370
2.40 - 5.00	1530

The minimum width is 900 mm.
For products produced in the Netherlands click here.

Tolerances

Tolerances for wide strip and slit wide strip comply with standard EN 10051: 2010.
Tighter tolerances are available, please contact us.

EN-Product-Hot-rolled-All grades Shape and dimensional tolerances TSUK

Shape and dimensional tolerances

The specified values for wide strip do not apply to the uncropped ends of the coil (‘head’ and ‘tail’). The length of these uncropped ends is calculated using the following formula:

length (in metres) = 90/nominal thickness (in mm), with a maximum of 20 metres.

If required, this part of the coil can be removed, however an additional cost may be charged for this.

Tolerances on thickness

Tata Steel can supply to full thickness tolerance specified in EN 10051:2010.

Tighter tolerances are available as shown below:

Product family	Thickness tolerances available (% of full EN 10051:2010 tolerance)
	100%	75%	66%	50%
Steel for forming	Yes	Yes	Yes	(see note 1)
High-strength low-alloy (HSLA)	Yes	Yes	Yes	Yes
AHSS	Yes	Yes	Yes	Yes
Structural steel	Yes	Yes	Yes	Yes
Boron manganese steel	Yes	Yes	Yes
Steel for gas cylinders	Yes

¹ Please contact us for tolerances below 66%
Please contact us on the availability of special tolerances to meet your requirements.

Tolerances on thickness for hot-rolled steel with a low carbon content for cold forming
(DD11-DD14 in EN 10111:2008)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.13	± 0.14	± 0.16	-
> 2.00	≤ 2.50	± 0.14	± 0.16	± 0.17	± 0.19
> 2.50	≤ 3.00	± 0.15	± 0.17	± 0.18	± 0.20
> 3.00	≤ 4.00	± 0.17	± 0.18	± 0.20	± 0.20
> 4.00	≤ 5.00	± 0.18	± 0.20	± 0.21	± 0.22
> 5.00	≤ 6.00	± 0.20	± 0.21	± 0.22	± 0.23
> 6.00	≤ 8.00	± 0.22	± 0.23	± 0.23	± 0.26
> 8.00	≤ 11.00	± 0.24	± 0.25	± 0.25	± 0.28

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum yield strength
R_e ≤ 300 N/mm² (category A)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.17	± 0.19	± 0.21	-
> 2.00	≤ 2.50	± 0.18	± 0.21	± 0.23	± 0.25
> 2.50	≤ 3.00	± 0.20	± 0.22	± 0.24	± 0.26
> 3.00	≤ 4.00	± 0.22	± 0.24	± 0.26	± 0.27
> 4.00	≤ 5.00	± 0.24	± 0.26	± 0.28	± 0.29
> 5.00	≤ 6.00	± 0.26	± 0.28	± 0.29	± 0.31
> 6.00	≤ 8.00	± 0.29	± 0.30	± 0.31	± 0.35
> 8.00	≤ 10.00	± 0.32	± 0.33	± 0.34	± 0.40
> 10.00	≤ 12.50	± 0.35	± 0.36	± 0.37	± 0.43
> 12.50	≤ 15.00	± 0.37	± 0.38	± 0.40	± 0.46
> 15.00	≤ 25.00	± 0.40	± 0.42	± 0.45	± 0.50

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum yield strength
300 N/mm² < R_e ≤ 360 N/mm² (category B)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.20	± 0.22	± 0.24	-
> 2.00	≤ 2.50	± 0.21	± 0.24	± 0.26	± 0.29
> 2.50	≤ 3.00	± 0.23	± 0.25	± 0.28	± 0.30
> 3.00	≤ 4.00	± 0.25	± 0.28	± 0.30	± 0.31
> 4.00	≤ 5.00	± 0.28	± 0.30	± 0.32	± 0.33
> 5.00	≤ 6.00	± 0.30	± 0.32	± 0.33	± 0.36
> 6.00	≤ 8.00	± 0.33	± 0.35	± 0.36	± 0.40
> 8.00	≤ 10.00	± 0.37	± 0.38	± 0.39	± 0.46
> 10.00	≤ 12.50	± 0.40	± 0.41	± 0.43	± 0.49
> 12.50	≤ 15.00	± 0.43	± 0.44	± 0.46	± 0.53
> 15.00	≤ 25.00	± 0.46	± 0.48	± 0.52	± 0.58

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum yield strength
360 N/mm² < R_e ≤ 420 N/mm² (category C)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.22	± 0.25	± 0.27	-
> 2.00	≤ 2.50	± 0.23	± 0.27	± 0.30	± 0.33
> 2.50	≤ 3.00	± 0.26	± 0.29	± 0.31	± 0.34
> 3.00	≤ 4.00	± 0.29	± 0.31	± 0.34	± 0.35
> 4.00	≤ 5.00	± 0.31	± 0.34	± 0.36	± 0.38
> 5.00	≤ 6.00	± 0.34	± 0.36	± 0.38	± 0.40
> 6.00	≤ 8.00	± 0.38	± 0.39	± 0.40	± 0.46
> 8.00	≤ 10.00	± 0.42	± 0.43	± 0.44	± 0.52
> 10.00	≤ 12.50	± 0.46	± 0.47	± 0.48	± 0.56
> 12.50	≤ 15.00	± 0.48	± 0.49	± 0.52	± 0.60
> 15.00	≤ 25.00	± 0.52	± 0.55	± 0.59	± 0.65

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum yield strength
420 N/mm² < R_e ≤ 900 N/mm² (category D)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.24	± 0.27	± 0.29	-
> 2.00	≤ 2.50	± 0.25	± 0.29	± 0.32	± 0.35
> 2.50	≤ 3.00	± 0.28	± 0.31	± 0.34	± 0.36
> 3.00	≤ 4.00	± 0.31	± 0.34	± 0.36	± 0.38
> 4.00	≤ 5.00	± 0.34	± 0.36	± 0.39	± 0.41
> 5.00	≤ 6.00	± 0.36	± 0.39	± 0.41	± 0.43
> 6.00	≤ 8.00	± 0.41	± 0.42	± 0.43	± 0.49
> 8.00	≤ 10.00	± 0.45	± 0.46	± 0.48	± 0.56
> 10.00	≤ 12.50	± 0.49	± 0.50	± 0.52	± 0.60
> 12.50	≤ 15.00	± 0.52	± 0.53	± 0.56	± 0.64
> 15.00	≤ 25.00	± 0.56	± 0.59	± 0.63	± 0.70

All dimensions are mm.

Tolerances on width

Tolerances in mm.

Nominal width w
	Mill edges		Trimmed edges
	lower	upper	lower	upper
w ≤ 1200	0	20	0	3
1200 < w ≤ 1850	0	20	0	5
w > 1850	0	25	0	6

Tolerances in mm for wide strip and slit wide strip
The tolerances for wide strip and slit wide strip comply with standard EN 10051:2010.

The specified values for wide strip do not apply to the uncropped ends of the coil (‘head’ and ‘tail’). The length of these uncropped ends is calculated using the following formula:
length (in metres) = 90/nominal thickness (in mm), with a maximum of 20 metres.

If required, this part of the coil can be removed, however an additional cost may be charged for this.

Edge camber

The deviation from the edge over a length of 5000mm:

• with mill edges, no more than 20mm
• with trimmed edges, no more than 15mm

Flatness

Requirements as regards flatness can be agreed at the time of enquiry.

Option for maximum crown values

The following high crown C40 options available for hot-rolled products.

Crown values on the C20-position as well as minimum crown values on both C20 and C40 position are also available on request.

Maximum Crown C40 in µm values for hot-rolled steel with a low carbon content for cold forming
(DD11-DD14 in EN 10111:2008)

Category 1		C40
Nominal Thickness		≤ 1200	> 1200	> 1500	> 1800
Nominal Thickness		≤ 1200	≤ 1500	≤ 1800	> 1800
> 1.47	≤ 2.00	40	40	40	40
> 2.00	≤ 2.50	40	40	50	50
> 2.50	≤ 3.00	40	40	50	50
> 3.00	≤ 6.00	40	50	50	50
> 6.00	≤ 11.00	50	50	50	50

Maximum Crown C40 in µm values of structural steel grades
(S185-S235-S275 ≤ 10mm in EN 10025-2:2004)

Category 2		C40
Nominal Thickness		≤ 1200	> 1200	> 1500	> 1800
Nominal Thickness		≤ 1200	≤ 1500	≤ 1800	> 1800
> 1.47	≤ 2.00	40	40	40	40
> 2.00	≤ 2.50	40	40	50	50
> 2.50	≤ 20.00	50	50	50	50

Maximum Crown C40 in µm values of structural steel grades(S275 > 10mm in EN 10025-2:2004)
and HSLA grades (S315MC in EN 10149-2:1996)

Category 3		C40
Nominal Thickness		≤ 1200	> 1200	> 1500	> 1800
Nominal Thickness		≤ 1200	≤ 1500	≤ 1800	> 1800
> 1.47	≤ 2.00	50	50	60	60
> 2.00	≤ 2.50	50	60	60	60
> 2.50	≤ 3.00	50	60	60	60
> 3.00	≤ 20.00	60	60	70	70

Maximum Crown C40 in µm values of HSLA grades
(S355MC, S420MC, S460MC, S500MC, S550MC in EN 10149-2:1996)

Category 4		C40
Nominal Thickness		≤ 1200	> 1200	> 1500	> 1800
Nominal Thickness		≤ 1200	≤ 1500	≤ 1800	> 1800
> 1.47	≤ 2.00	60	70	70	70
> 2.00	≤ 2.50	60	70	80	80
> 2.50	≤ 3.00	60	70	80	80
> 3.00	≤ 5.00	70	70	80	80
> 5.00	≤ 20.00	80	80	80	80

Dimensions and coil weights

Tata Steel can supply hot-rolled steels with the following minimum and maximum dimensions and weights:

Description	Availability
Coil diameter inner non-pickled	762mm
Coil diameter inner pickled	610mm standard
Tolerance on inner diameter	+0/-50mm
Coil diameter outer non-pickled	Outer diameter available is 10/7 x width
	to reduce possibility of coil tipping over
	Max. 2200mm
	Min. 1050mm
Coil diameter outer pickled and oiled	Outer diameter available is 10/7 x width
	to reduce possibility of coil tipping over
	Outer diameter
	limit 2200mm
	Min. 1050mm
Coil weight	Max. 32 tonnes
	Additional maximum limits from transport
	limits and outer coil diameter
	Some HR products may have different
	coil weight ranges
Minimum tonnage per order	Please refer to price list for order quantity details
Minimum tonnage per order	Minimum order quantities may apply

EN-Product-Hot-rolled-Heavy+Light further processing TSUK

Further processing

We have a broad network of Tata Steel service centres across Europe, offering decoiling and slitting services from stock and against short lead times.

Heavy gauge processing

Processing type	Decoiling
Thickness range (mm)	1.4 - 25.4
Width range (mm)	300 - 2600
Length range	up to 18.4m
Locations	UK Netherlands

Light gauge processing

Processing type	Slitting	Decoiling	Blanking
Thickness range (mm)	0.2 - 7.0	0.3 - 6.0	0.3 - 6.0
Width range (mm)	10 - 2050	50 - 2600	200 - 2600
Length range	-	up to 6m	up to 6m
Locations	UK Ireland Netherlands Germany France Spain Sweden Norway Finland	UK Ireland Netherlands Germany France Spain Sweden Norway Finland	UK Ireland

For further information please visit our Service Centre webpages.

EN-Product-Hot-Rolled-HSS-S460MC TSUK

S460MC

Specification details for S460MC

EN-Product-Hot-Rolled-HSS-All grades Overview TSUK

Overview

Our high-strength steel grades have been developed to meet a wide variety of applications. The consistent quality of these steels means they can be relied on to deliver benefits for your end-products and processes.

Applications

Agricultural machinery
Chassis and suspension components and assemblies
Containers
Cranes and crane booms
Earth-moving equipment
Lightweight towers
Radiator components
Safety-critical applications
Racking and shelving
Telescopic booms
Tow hooks
Train carriages

Relationship with standards

Tata Steel’s high-strength low-alloy steels comply with the following standards:

EN 10149-2: 2013	EN 10025-2: 2004	VDA	Tata Steel	Tata Steel	Germany SEW 092
Grade	Grade	Grade	Grade	Grade*	Grade
S315MC	-	HR300LA	Tenform XF315	Ympress S315MC	QStE340TM
S355MC	-	HR340LA	Tenform XF355	Ympress S355MC	QStE380TM
S420MC	-	HR420LA	Tenform XF420	Ympress S420MC	QStE460TM
S460MC	-	HR460LA	Tenform XF460	Ympress S460MC	QStE500TM
S500MC	-	HR500LA	Tenform XF500	Ympress S500MC	QStE550TM
S550MC*	-	-	-	Ympress S550MC	-
S650MC*	-	-	-	Ympress S650MC	-
-	-	-	-	Ympress E690TM	QStE690TM
S700MC*	-	HR700LA	-	Ympress S700MC	-
S960MC*	-	HR960LA	-	Ympress S960MC	-
-	S235J2C+N	-	-	-	-
-	S235J0C+N	-	-	-	-
-	S235JRC+AR	-	-	-	-

*For products produced in the Netherlands click here.

Supply - product conditions

Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:

Side/surface condition	non-pickled	pickled	pickled and oiled
Mill edges	Yes	Yes	Yes
Trimmed edges	-	Yes	Yes

Trimmed edges available in thicknesses up to 5.0 mm.
Please contact us regarding other specifications we may have that meet your needs.

Surface aspects

Description	Availability
Surface finish	Coils are available in non-pickled and pickled finish for most grades. For grade specific availability, please refer to the dimensional tables.
Oiling	Pickled finish is available with rolling or preservative oil applied. Oil weight normally 0.4-1.8 g/m²

Alternative oiling ranges are available.
Please contact us for details.

Certification

Test certificates 2.2/3.1 are available according to EN 10204.

EN-Product-Hot-rolled-All grades Surface aspects Supply Conditions TSUK

Supply Conditions

Supply - product conditions

Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:

Side/surface condition	non-pickled	pickled	pickled and oiled
Mill edges	Yes	Yes	Yes
Trimmed edges	-	Yes	Yes

Trimmed edges available in thicknesses up to 5.0 mm.
Please contact us regarding other specifications we may have that meet your needs.

Surface aspects

Description	Availability
Surface finish	Coils are available in non-pickled and pickled finish for most grades. For grade specific availability, please refer to the dimensional tables.
Oiling	Pickled finish is available with rolling or preservative oil applied. Oil weight normally 0.4-1.8 g/m²

Alternative oiling ranges are available.
Please contact us for details.

Certification

Test certificates 2.2/3.1 are available according to EN 10204.

EN-Product-Hot-Rolled-HSS-S460MC-Properties TSUK

Properties

Mechanical Properties

Steel supplied will comply with the mechanical property limits below.
The values of the tensile test apply to test bars parallel to the rolling direction.
The values of the bend test apply to test bars transverse to the rolling direction.

Grade		S460MC
Min. Yield strength R_eH1	N/mm²	460
Tensile strength R_m	N/mm²	520 - 670
Min. elongation after fracture A%	t < 3	14
	3 ≤ t < 5	17
	t ≥ 5	17
Min. bend test diameter	t < 5	1 t
Min. bend test diameter	t ≥ 5	1.0 t

^1. Upper yield strength or 0.2% proof stress applies.
t – material thickness in mm.
Elongation test piece length L₀ = 80 mm for t < 3 mm. L₀ = 5.65√S₀ for t ≥ 3 mm.

Impact strength

Impact tests can be performed for thicknesses ≥ 6.0 mm. Please contact us for details.

Chemical composition

Steel supplied will comply with the chemical limits below.

Grade		S460MC
C	Max.	0.12
Mn	Max.	1.6
P	Max.	0.025
S	Max.	0.015
Si	Max.	0.5
Al_tot	Min.	0.015
Nb	Max. ¹	0.09
V	Max. ¹	0.2
Ti	Max. ¹	0.15
Mo	Max.	-
Cu	Max.	-

^1. The sum of Nb, V and Ti shall be max. 0.22%.
All values are in weight%

EN-Product-Hot-Rolled-HSS-S460MC-Dimensions TSUK

Dimensions

Dimensional capability - non-pickled

Dimensions in mm.

Thickness	Max. width
From - up to	S460MC
1.80 - 1.90	1110
1.90 - 2.00	1160
2.00 - 2.20	1260
2.20 - 2.60	1360
2.60 - 4.00	1460
4.00 - 5.00	1530
5.001 - 10.00	1610

The minimum width is 900 mm.
Other dimensions may be available - please contact us.
For products produced in the Netherlands click here.

Dimensional capability - pickled

Dimensions in mm.

Thickness	Max. width
From - up to	S460MC
1.80 - 1.90	1110
1.90 - 2.00	1160
2.00 - 2.20	1260
2.20 - 2.60	1360
2.60 - 4.00	1460
4.00 - 5.00	1530

The minimum width is 900 mm.
Other dimensions may be available - please contact us.
For products produced in the Netherlands click here..

Tolerances

Tolerances for wide strip and slit wide strip comply with standard EN 10051: 2010.
Tighter tolerances are available, please contact us.

EN-Product-Hot-rolled-All grades Shape and dimensional tolerances TSUK

Shape and dimensional tolerances

The specified values for wide strip do not apply to the uncropped ends of the coil (‘head’ and ‘tail’). The length of these uncropped ends is calculated using the following formula:

length (in metres) = 90/nominal thickness (in mm), with a maximum of 20 metres.

If required, this part of the coil can be removed, however an additional cost may be charged for this.

Tolerances on thickness

Tata Steel can supply to full thickness tolerance specified in EN 10051:2010.

Tighter tolerances are available as shown below:

Product family	Thickness tolerances available (% of full EN 10051:2010 tolerance)
	100%	75%	66%	50%
Steel for forming	Yes	Yes	Yes	(see note 1)
High-strength low-alloy (HSLA)	Yes	Yes	Yes	Yes
AHSS	Yes	Yes	Yes	Yes
Structural steel	Yes	Yes	Yes	Yes
Boron manganese steel	Yes	Yes	Yes
Steel for gas cylinders	Yes

¹ Please contact us for tolerances below 66%
Please contact us on the availability of special tolerances to meet your requirements.

Tolerances on thickness for hot-rolled steel with a low carbon content for cold forming
(DD11-DD14 in EN 10111:2008)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.13	± 0.14	± 0.16	-
> 2.00	≤ 2.50	± 0.14	± 0.16	± 0.17	± 0.19
> 2.50	≤ 3.00	± 0.15	± 0.17	± 0.18	± 0.20
> 3.00	≤ 4.00	± 0.17	± 0.18	± 0.20	± 0.20
> 4.00	≤ 5.00	± 0.18	± 0.20	± 0.21	± 0.22
> 5.00	≤ 6.00	± 0.20	± 0.21	± 0.22	± 0.23
> 6.00	≤ 8.00	± 0.22	± 0.23	± 0.23	± 0.26
> 8.00	≤ 11.00	± 0.24	± 0.25	± 0.25	± 0.28

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum yield strength
R_e ≤ 300 N/mm² (category A)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.17	± 0.19	± 0.21	-
> 2.00	≤ 2.50	± 0.18	± 0.21	± 0.23	± 0.25
> 2.50	≤ 3.00	± 0.20	± 0.22	± 0.24	± 0.26
> 3.00	≤ 4.00	± 0.22	± 0.24	± 0.26	± 0.27
> 4.00	≤ 5.00	± 0.24	± 0.26	± 0.28	± 0.29
> 5.00	≤ 6.00	± 0.26	± 0.28	± 0.29	± 0.31
> 6.00	≤ 8.00	± 0.29	± 0.30	± 0.31	± 0.35
> 8.00	≤ 10.00	± 0.32	± 0.33	± 0.34	± 0.40
> 10.00	≤ 12.50	± 0.35	± 0.36	± 0.37	± 0.43
> 12.50	≤ 15.00	± 0.37	± 0.38	± 0.40	± 0.46
> 15.00	≤ 25.00	± 0.40	± 0.42	± 0.45	± 0.50

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum yield strength
300 N/mm² < R_e ≤ 360 N/mm² (category B)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.20	± 0.22	± 0.24	-
> 2.00	≤ 2.50	± 0.21	± 0.24	± 0.26	± 0.29
> 2.50	≤ 3.00	± 0.23	± 0.25	± 0.28	± 0.30
> 3.00	≤ 4.00	± 0.25	± 0.28	± 0.30	± 0.31
> 4.00	≤ 5.00	± 0.28	± 0.30	± 0.32	± 0.33
> 5.00	≤ 6.00	± 0.30	± 0.32	± 0.33	± 0.36
> 6.00	≤ 8.00	± 0.33	± 0.35	± 0.36	± 0.40
> 8.00	≤ 10.00	± 0.37	± 0.38	± 0.39	± 0.46
> 10.00	≤ 12.50	± 0.40	± 0.41	± 0.43	± 0.49
> 12.50	≤ 15.00	± 0.43	± 0.44	± 0.46	± 0.53
> 15.00	≤ 25.00	± 0.46	± 0.48	± 0.52	± 0.58

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum yield strength
360 N/mm² < R_e ≤ 420 N/mm² (category C)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.22	± 0.25	± 0.27	-
> 2.00	≤ 2.50	± 0.23	± 0.27	± 0.30	± 0.33
> 2.50	≤ 3.00	± 0.26	± 0.29	± 0.31	± 0.34
> 3.00	≤ 4.00	± 0.29	± 0.31	± 0.34	± 0.35
> 4.00	≤ 5.00	± 0.31	± 0.34	± 0.36	± 0.38
> 5.00	≤ 6.00	± 0.34	± 0.36	± 0.38	± 0.40
> 6.00	≤ 8.00	± 0.38	± 0.39	± 0.40	± 0.46
> 8.00	≤ 10.00	± 0.42	± 0.43	± 0.44	± 0.52
> 10.00	≤ 12.50	± 0.46	± 0.47	± 0.48	± 0.56
> 12.50	≤ 15.00	± 0.48	± 0.49	± 0.52	± 0.60
> 15.00	≤ 25.00	± 0.52	± 0.55	± 0.59	± 0.65

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum yield strength
420 N/mm² < R_e ≤ 900 N/mm² (category D)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.24	± 0.27	± 0.29	-
> 2.00	≤ 2.50	± 0.25	± 0.29	± 0.32	± 0.35
> 2.50	≤ 3.00	± 0.28	± 0.31	± 0.34	± 0.36
> 3.00	≤ 4.00	± 0.31	± 0.34	± 0.36	± 0.38
> 4.00	≤ 5.00	± 0.34	± 0.36	± 0.39	± 0.41
> 5.00	≤ 6.00	± 0.36	± 0.39	± 0.41	± 0.43
> 6.00	≤ 8.00	± 0.41	± 0.42	± 0.43	± 0.49
> 8.00	≤ 10.00	± 0.45	± 0.46	± 0.48	± 0.56
> 10.00	≤ 12.50	± 0.49	± 0.50	± 0.52	± 0.60
> 12.50	≤ 15.00	± 0.52	± 0.53	± 0.56	± 0.64
> 15.00	≤ 25.00	± 0.56	± 0.59	± 0.63	± 0.70

All dimensions are mm.

Tolerances on width

Tolerances in mm.

Nominal width w
	Mill edges		Trimmed edges
	lower	upper	lower	upper
w ≤ 1200	0	20	0	3
1200 < w ≤ 1850	0	20	0	5
w > 1850	0	25	0	6

Tolerances in mm for wide strip and slit wide strip
The tolerances for wide strip and slit wide strip comply with standard EN 10051:2010.

The specified values for wide strip do not apply to the uncropped ends of the coil (‘head’ and ‘tail’). The length of these uncropped ends is calculated using the following formula:
length (in metres) = 90/nominal thickness (in mm), with a maximum of 20 metres.

If required, this part of the coil can be removed, however an additional cost may be charged for this.

Edge camber

The deviation from the edge over a length of 5000mm:

• with mill edges, no more than 20mm
• with trimmed edges, no more than 15mm

Flatness

Requirements as regards flatness can be agreed at the time of enquiry.

Option for maximum crown values

The following high crown C40 options available for hot-rolled products.

Crown values on the C20-position as well as minimum crown values on both C20 and C40 position are also available on request.

Maximum Crown C40 in µm values for hot-rolled steel with a low carbon content for cold forming
(DD11-DD14 in EN 10111:2008)

Category 1		C40
Nominal Thickness		≤ 1200	> 1200	> 1500	> 1800
Nominal Thickness		≤ 1200	≤ 1500	≤ 1800	> 1800
> 1.47	≤ 2.00	40	40	40	40
> 2.00	≤ 2.50	40	40	50	50
> 2.50	≤ 3.00	40	40	50	50
> 3.00	≤ 6.00	40	50	50	50
> 6.00	≤ 11.00	50	50	50	50

Maximum Crown C40 in µm values of structural steel grades
(S185-S235-S275 ≤ 10mm in EN 10025-2:2004)

Category 2		C40
Nominal Thickness		≤ 1200	> 1200	> 1500	> 1800
Nominal Thickness		≤ 1200	≤ 1500	≤ 1800	> 1800
> 1.47	≤ 2.00	40	40	40	40
> 2.00	≤ 2.50	40	40	50	50
> 2.50	≤ 20.00	50	50	50	50

Maximum Crown C40 in µm values of structural steel grades(S275 > 10mm in EN 10025-2:2004)
and HSLA grades (S315MC in EN 10149-2:1996)

Category 3		C40
Nominal Thickness		≤ 1200	> 1200	> 1500	> 1800
Nominal Thickness		≤ 1200	≤ 1500	≤ 1800	> 1800
> 1.47	≤ 2.00	50	50	60	60
> 2.00	≤ 2.50	50	60	60	60
> 2.50	≤ 3.00	50	60	60	60
> 3.00	≤ 20.00	60	60	70	70

Maximum Crown C40 in µm values of HSLA grades
(S355MC, S420MC, S460MC, S500MC, S550MC in EN 10149-2:1996)

Category 4		C40
Nominal Thickness		≤ 1200	> 1200	> 1500	> 1800
Nominal Thickness		≤ 1200	≤ 1500	≤ 1800	> 1800
> 1.47	≤ 2.00	60	70	70	70
> 2.00	≤ 2.50	60	70	80	80
> 2.50	≤ 3.00	60	70	80	80
> 3.00	≤ 5.00	70	70	80	80
> 5.00	≤ 20.00	80	80	80	80

Dimensions and coil weights

Tata Steel can supply hot-rolled steels with the following minimum and maximum dimensions and weights:

Description	Availability
Coil diameter inner non-pickled	762mm
Coil diameter inner pickled	610mm standard
Tolerance on inner diameter	+0/-50mm
Coil diameter outer non-pickled	Outer diameter available is 10/7 x width
	to reduce possibility of coil tipping over
	Max. 2200mm
	Min. 1050mm
Coil diameter outer pickled and oiled	Outer diameter available is 10/7 x width
	to reduce possibility of coil tipping over
	Outer diameter
	limit 2200mm
	Min. 1050mm
Coil weight	Max. 32 tonnes
	Additional maximum limits from transport
	limits and outer coil diameter
	Some HR products may have different
	coil weight ranges
Minimum tonnage per order	Please refer to price list for order quantity details
Minimum tonnage per order	Minimum order quantities may apply

EN-Product-Hot-rolled-Heavy+Light further processing TSUK

Further processing

We have a broad network of Tata Steel service centres across Europe, offering decoiling and slitting services from stock and against short lead times.

Heavy gauge processing

Processing type	Decoiling
Thickness range (mm)	1.4 - 25.4
Width range (mm)	300 - 2600
Length range	up to 18.4m
Locations	UK Netherlands

Light gauge processing

Processing type	Slitting	Decoiling	Blanking
Thickness range (mm)	0.2 - 7.0	0.3 - 6.0	0.3 - 6.0
Width range (mm)	10 - 2050	50 - 2600	200 - 2600
Length range	-	up to 6m	up to 6m
Locations	UK Ireland Netherlands Germany France Spain Sweden Norway Finland	UK Ireland Netherlands Germany France Spain Sweden Norway Finland	UK Ireland

For further information please visit our Service Centre webpages.

EN-Product-Hot-Rolled-HSS-S500MC TSUK

S500MC

Specification details for S500MC

EN-Product-Hot-Rolled-HSS-All grades Overview TSUK

Overview

Our high-strength steel grades have been developed to meet a wide variety of applications. The consistent quality of these steels means they can be relied on to deliver benefits for your end-products and processes.

Applications

Agricultural machinery
Chassis and suspension components and assemblies
Containers
Cranes and crane booms
Earth-moving equipment
Lightweight towers
Radiator components
Safety-critical applications
Racking and shelving
Telescopic booms
Tow hooks
Train carriages

Relationship with standards

Tata Steel’s high-strength low-alloy steels comply with the following standards:

EN 10149-2: 2013	EN 10025-2: 2004	VDA	Tata Steel	Tata Steel	Germany SEW 092
Grade	Grade	Grade	Grade	Grade*	Grade
S315MC	-	HR300LA	Tenform XF315	Ympress S315MC	QStE340TM
S355MC	-	HR340LA	Tenform XF355	Ympress S355MC	QStE380TM
S420MC	-	HR420LA	Tenform XF420	Ympress S420MC	QStE460TM
S460MC	-	HR460LA	Tenform XF460	Ympress S460MC	QStE500TM
S500MC	-	HR500LA	Tenform XF500	Ympress S500MC	QStE550TM
S550MC*	-	-	-	Ympress S550MC	-
S650MC*	-	-	-	Ympress S650MC	-
-	-	-	-	Ympress E690TM	QStE690TM
S700MC*	-	HR700LA	-	Ympress S700MC	-
S960MC*	-	HR960LA	-	Ympress S960MC	-
-	S235J2C+N	-	-	-	-
-	S235J0C+N	-	-	-	-
-	S235JRC+AR	-	-	-	-

*For products produced in the Netherlands click here.

Supply - product conditions

Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:

Side/surface condition	non-pickled	pickled	pickled and oiled
Mill edges	Yes	Yes	Yes
Trimmed edges	-	Yes	Yes

Trimmed edges available in thicknesses up to 5.0 mm.
Please contact us regarding other specifications we may have that meet your needs.

Surface aspects

Description	Availability
Surface finish	Coils are available in non-pickled and pickled finish for most grades. For grade specific availability, please refer to the dimensional tables.
Oiling	Pickled finish is available with rolling or preservative oil applied. Oil weight normally 0.4-1.8 g/m²

Alternative oiling ranges are available.
Please contact us for details.

Certification

Test certificates 2.2/3.1 are available according to EN 10204.

EN-Product-Hot-rolled-All grades Surface aspects Supply Conditions TSUK

Supply Conditions

Supply - product conditions

Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:

Side/surface condition	non-pickled	pickled	pickled and oiled
Mill edges	Yes	Yes	Yes
Trimmed edges	-	Yes	Yes

Trimmed edges available in thicknesses up to 5.0 mm.
Please contact us regarding other specifications we may have that meet your needs.

Surface aspects

Description	Availability
Surface finish	Coils are available in non-pickled and pickled finish for most grades. For grade specific availability, please refer to the dimensional tables.
Oiling	Pickled finish is available with rolling or preservative oil applied. Oil weight normally 0.4-1.8 g/m²

Alternative oiling ranges are available.
Please contact us for details.

Certification

Test certificates 2.2/3.1 are available according to EN 10204.

EN-Product-Hot-rolled-All grades Shape and dimensional tolerances TSUK

Shape and dimensional tolerances

The specified values for wide strip do not apply to the uncropped ends of the coil (‘head’ and ‘tail’). The length of these uncropped ends is calculated using the following formula:

length (in metres) = 90/nominal thickness (in mm), with a maximum of 20 metres.

If required, this part of the coil can be removed, however an additional cost may be charged for this.

Tolerances on thickness

Tata Steel can supply to full thickness tolerance specified in EN 10051:2010.

Tighter tolerances are available as shown below:

Product family	Thickness tolerances available (% of full EN 10051:2010 tolerance)
	100%	75%	66%	50%
Steel for forming	Yes	Yes	Yes	(see note 1)
High-strength low-alloy (HSLA)	Yes	Yes	Yes	Yes
AHSS	Yes	Yes	Yes	Yes
Structural steel	Yes	Yes	Yes	Yes
Boron manganese steel	Yes	Yes	Yes
Steel for gas cylinders	Yes

¹ Please contact us for tolerances below 66%
Please contact us on the availability of special tolerances to meet your requirements.

Tolerances on thickness for hot-rolled steel with a low carbon content for cold forming
(DD11-DD14 in EN 10111:2008)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.13	± 0.14	± 0.16	-
> 2.00	≤ 2.50	± 0.14	± 0.16	± 0.17	± 0.19
> 2.50	≤ 3.00	± 0.15	± 0.17	± 0.18	± 0.20
> 3.00	≤ 4.00	± 0.17	± 0.18	± 0.20	± 0.20
> 4.00	≤ 5.00	± 0.18	± 0.20	± 0.21	± 0.22
> 5.00	≤ 6.00	± 0.20	± 0.21	± 0.22	± 0.23
> 6.00	≤ 8.00	± 0.22	± 0.23	± 0.23	± 0.26
> 8.00	≤ 11.00	± 0.24	± 0.25	± 0.25	± 0.28

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum yield strength
R_e ≤ 300 N/mm² (category A)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.17	± 0.19	± 0.21	-
> 2.00	≤ 2.50	± 0.18	± 0.21	± 0.23	± 0.25
> 2.50	≤ 3.00	± 0.20	± 0.22	± 0.24	± 0.26
> 3.00	≤ 4.00	± 0.22	± 0.24	± 0.26	± 0.27
> 4.00	≤ 5.00	± 0.24	± 0.26	± 0.28	± 0.29
> 5.00	≤ 6.00	± 0.26	± 0.28	± 0.29	± 0.31
> 6.00	≤ 8.00	± 0.29	± 0.30	± 0.31	± 0.35
> 8.00	≤ 10.00	± 0.32	± 0.33	± 0.34	± 0.40
> 10.00	≤ 12.50	± 0.35	± 0.36	± 0.37	± 0.43
> 12.50	≤ 15.00	± 0.37	± 0.38	± 0.40	± 0.46
> 15.00	≤ 25.00	± 0.40	± 0.42	± 0.45	± 0.50

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum yield strength
300 N/mm² < R_e ≤ 360 N/mm² (category B)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.20	± 0.22	± 0.24	-
> 2.00	≤ 2.50	± 0.21	± 0.24	± 0.26	± 0.29
> 2.50	≤ 3.00	± 0.23	± 0.25	± 0.28	± 0.30
> 3.00	≤ 4.00	± 0.25	± 0.28	± 0.30	± 0.31
> 4.00	≤ 5.00	± 0.28	± 0.30	± 0.32	± 0.33
> 5.00	≤ 6.00	± 0.30	± 0.32	± 0.33	± 0.36
> 6.00	≤ 8.00	± 0.33	± 0.35	± 0.36	± 0.40
> 8.00	≤ 10.00	± 0.37	± 0.38	± 0.39	± 0.46
> 10.00	≤ 12.50	± 0.40	± 0.41	± 0.43	± 0.49
> 12.50	≤ 15.00	± 0.43	± 0.44	± 0.46	± 0.53
> 15.00	≤ 25.00	± 0.46	± 0.48	± 0.52	± 0.58

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum yield strength
360 N/mm² < R_e ≤ 420 N/mm² (category C)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.22	± 0.25	± 0.27	-
> 2.00	≤ 2.50	± 0.23	± 0.27	± 0.30	± 0.33
> 2.50	≤ 3.00	± 0.26	± 0.29	± 0.31	± 0.34
> 3.00	≤ 4.00	± 0.29	± 0.31	± 0.34	± 0.35
> 4.00	≤ 5.00	± 0.31	± 0.34	± 0.36	± 0.38
> 5.00	≤ 6.00	± 0.34	± 0.36	± 0.38	± 0.40
> 6.00	≤ 8.00	± 0.38	± 0.39	± 0.40	± 0.46
> 8.00	≤ 10.00	± 0.42	± 0.43	± 0.44	± 0.52
> 10.00	≤ 12.50	± 0.46	± 0.47	± 0.48	± 0.56
> 12.50	≤ 15.00	± 0.48	± 0.49	± 0.52	± 0.60
> 15.00	≤ 25.00	± 0.52	± 0.55	± 0.59	± 0.65

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum yield strength
420 N/mm² < R_e ≤ 900 N/mm² (category D)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.24	± 0.27	± 0.29	-
> 2.00	≤ 2.50	± 0.25	± 0.29	± 0.32	± 0.35
> 2.50	≤ 3.00	± 0.28	± 0.31	± 0.34	± 0.36
> 3.00	≤ 4.00	± 0.31	± 0.34	± 0.36	± 0.38
> 4.00	≤ 5.00	± 0.34	± 0.36	± 0.39	± 0.41
> 5.00	≤ 6.00	± 0.36	± 0.39	± 0.41	± 0.43
> 6.00	≤ 8.00	± 0.41	± 0.42	± 0.43	± 0.49
> 8.00	≤ 10.00	± 0.45	± 0.46	± 0.48	± 0.56
> 10.00	≤ 12.50	± 0.49	± 0.50	± 0.52	± 0.60
> 12.50	≤ 15.00	± 0.52	± 0.53	± 0.56	± 0.64
> 15.00	≤ 25.00	± 0.56	± 0.59	± 0.63	± 0.70

All dimensions are mm.

Tolerances on width

Tolerances in mm.

Nominal width w
	Mill edges		Trimmed edges
	lower	upper	lower	upper
w ≤ 1200	0	20	0	3
1200 < w ≤ 1850	0	20	0	5
w > 1850	0	25	0	6

Tolerances in mm for wide strip and slit wide strip
The tolerances for wide strip and slit wide strip comply with standard EN 10051:2010.

The specified values for wide strip do not apply to the uncropped ends of the coil (‘head’ and ‘tail’). The length of these uncropped ends is calculated using the following formula:
length (in metres) = 90/nominal thickness (in mm), with a maximum of 20 metres.

If required, this part of the coil can be removed, however an additional cost may be charged for this.

Edge camber

The deviation from the edge over a length of 5000mm:

• with mill edges, no more than 20mm
• with trimmed edges, no more than 15mm

Flatness

Requirements as regards flatness can be agreed at the time of enquiry.

Option for maximum crown values

The following high crown C40 options available for hot-rolled products.

Crown values on the C20-position as well as minimum crown values on both C20 and C40 position are also available on request.

Maximum Crown C40 in µm values for hot-rolled steel with a low carbon content for cold forming
(DD11-DD14 in EN 10111:2008)

Category 1		C40
Nominal Thickness		≤ 1200	> 1200	> 1500	> 1800
Nominal Thickness		≤ 1200	≤ 1500	≤ 1800	> 1800
> 1.47	≤ 2.00	40	40	40	40
> 2.00	≤ 2.50	40	40	50	50
> 2.50	≤ 3.00	40	40	50	50
> 3.00	≤ 6.00	40	50	50	50
> 6.00	≤ 11.00	50	50	50	50

Maximum Crown C40 in µm values of structural steel grades
(S185-S235-S275 ≤ 10mm in EN 10025-2:2004)

Category 2		C40
Nominal Thickness		≤ 1200	> 1200	> 1500	> 1800
Nominal Thickness		≤ 1200	≤ 1500	≤ 1800	> 1800
> 1.47	≤ 2.00	40	40	40	40
> 2.00	≤ 2.50	40	40	50	50
> 2.50	≤ 20.00	50	50	50	50

Maximum Crown C40 in µm values of structural steel grades(S275 > 10mm in EN 10025-2:2004)
and HSLA grades (S315MC in EN 10149-2:1996)

Category 3		C40
Nominal Thickness		≤ 1200	> 1200	> 1500	> 1800
Nominal Thickness		≤ 1200	≤ 1500	≤ 1800	> 1800
> 1.47	≤ 2.00	50	50	60	60
> 2.00	≤ 2.50	50	60	60	60
> 2.50	≤ 3.00	50	60	60	60
> 3.00	≤ 20.00	60	60	70	70

Maximum Crown C40 in µm values of HSLA grades
(S355MC, S420MC, S460MC, S500MC, S550MC in EN 10149-2:1996)

Category 4		C40
Nominal Thickness		≤ 1200	> 1200	> 1500	> 1800
Nominal Thickness		≤ 1200	≤ 1500	≤ 1800	> 1800
> 1.47	≤ 2.00	60	70	70	70
> 2.00	≤ 2.50	60	70	80	80
> 2.50	≤ 3.00	60	70	80	80
> 3.00	≤ 5.00	70	70	80	80
> 5.00	≤ 20.00	80	80	80	80

Dimensions and coil weights

Tata Steel can supply hot-rolled steels with the following minimum and maximum dimensions and weights:

Description	Availability
Coil diameter inner non-pickled	762mm
Coil diameter inner pickled	610mm standard
Tolerance on inner diameter	+0/-50mm
Coil diameter outer non-pickled	Outer diameter available is 10/7 x width
	to reduce possibility of coil tipping over
	Max. 2200mm
	Min. 1050mm
Coil diameter outer pickled and oiled	Outer diameter available is 10/7 x width
	to reduce possibility of coil tipping over
	Outer diameter
	limit 2200mm
	Min. 1050mm
Coil weight	Max. 32 tonnes
	Additional maximum limits from transport
	limits and outer coil diameter
	Some HR products may have different
	coil weight ranges
Minimum tonnage per order	Please refer to price list for order quantity details
Minimum tonnage per order	Minimum order quantities may apply

EN-Product-Hot-Rolled-HSS-S500MC-Properties TSUK

Properties

Mechanical Properties

Steel supplied will comply with the mechanical property limits below.
The values of the tensile test apply to test bars parallel to the rolling direction.
The values of the bend test apply to test bars transverse to the rolling direction.

EN 10149-2: 2013	Grade	S500MC
Min. Yield strength R_eH¹ (N/mm²		500
Tensile strength R_m (N/mm²)		550 - 700
Elongation A (%)	t < 3	12
	3 ≤ t < 5	14
	t ≥ 5	14
Min. bend test diameter	t < 5	1 t
Min. bend test diameter	t ≥ 5	1.0 t

^1. Upper yield strength or 0.2% proof stress applies.
t – material thickness in mm.
Elongation after fracture A uses test piece length L₀ = 80 mm for t < 3 mm. L₀ = 5.65√S₀ for t ≥ 3 mm.

Impact strength

Impact tests can be performed for thicknesses ≥ 6.0 mm. Please contact us for details.

Chemical composition

Steel supplied will comply with the chemical limits below.

EN 10149-2: 2013	Grade	S500MC
C	Max.	0.12
Mn	Max.	1.7
P	Max.	0.025
S	Max.	0.015
Si	Max.	0.5
Altot	Min.	0.015
Nb	Max. 1	0.09
V	Max. 1	0.2
Ti	Max. 1	0.15
Mo	Max.	-
Cu	Max.	-

^1. The sum of Nb, V and Ti shall be max. 0.22%.
All values are in weight%

EN-Product-Hot-Rolled-HSS-S500MC-Dimensions TSUK

Dimensions

Dimensional capability - non-pickled

Dimensions in mm.

Thickness	Max. width
From - up to	S500MC
1.80 - 1.90	1100
1.90 - 2.00	1160
2.00 - 2.20	1250
2.20 - 2.50	1360
2.50 - 3.50	1410
3.50 - 5.00	1480
5.00 - 5.50	1550
5.50 - 6.00	1560
6.00 - 9.00	1610

The minimum width is 900 mm.
Other dimensions may be available - please contact us.
For products produced in the Netherlands click here.

Dimensional capability - pickled

Dimensions in mm.

Thickness	Max. width
From - up to	S500MC
1.80 - 1.90	1100
1.90 - 2.00	1160
2.00 - 2.20	1250
2.20 - 2.50	1360
2.50 - 3.50	1410
3.50 - 5.00	1480

The minimum width is 900 mm.
Other dimensions may be available - please contact us.
For products produced in the Netherlands click here.

Tolerances

Tolerances for wide strip and slit wide strip comply with standard EN 10051: 2010.
Tighter tolerances are available, please contact us.

EN-Product-Hot-rolled-Heavy+Light further processing TSUK

Further processing

We have a broad network of Tata Steel service centres across Europe, offering decoiling and slitting services from stock and against short lead times.

Heavy gauge processing

Processing type	Decoiling
Thickness range (mm)	1.4 - 25.4
Width range (mm)	300 - 2600
Length range	up to 18.4m
Locations	UK Netherlands

Light gauge processing

Processing type	Slitting	Decoiling	Blanking
Thickness range (mm)	0.2 - 7.0	0.3 - 6.0	0.3 - 6.0
Width range (mm)	10 - 2050	50 - 2600	200 - 2600
Length range	-	up to 6m	up to 6m
Locations	UK Ireland Netherlands Germany France Spain Sweden Norway Finland	UK Ireland Netherlands Germany France Spain Sweden Norway Finland	UK Ireland

For further information please visit our Service Centre webpages.

EN-Product-Hot-Rolled-HSS-Tenform XF315 TSUK

XF315

Specification details for XF315

EN-Product-Hot-Rolled-HSS-All grades Overview TSUK

Overview

Our high-strength steel grades have been developed to meet a wide variety of applications. The consistent quality of these steels means they can be relied on to deliver benefits for your end-products and processes.

Applications

Agricultural machinery
Chassis and suspension components and assemblies
Containers
Cranes and crane booms
Earth-moving equipment
Lightweight towers
Radiator components
Safety-critical applications
Racking and shelving
Telescopic booms
Tow hooks
Train carriages

Relationship with standards

Tata Steel’s high-strength low-alloy steels comply with the following standards:

EN 10149-2: 2013	EN 10025-2: 2004	VDA	Tata Steel	Tata Steel	Germany SEW 092
Grade	Grade	Grade	Grade	Grade*	Grade
S315MC	-	HR300LA	Tenform XF315	Ympress S315MC	QStE340TM
S355MC	-	HR340LA	Tenform XF355	Ympress S355MC	QStE380TM
S420MC	-	HR420LA	Tenform XF420	Ympress S420MC	QStE460TM
S460MC	-	HR460LA	Tenform XF460	Ympress S460MC	QStE500TM
S500MC	-	HR500LA	Tenform XF500	Ympress S500MC	QStE550TM
S550MC*	-	-	-	Ympress S550MC	-
S650MC*	-	-	-	Ympress S650MC	-
-	-	-	-	Ympress E690TM	QStE690TM
S700MC*	-	HR700LA	-	Ympress S700MC	-
S960MC*	-	HR960LA	-	Ympress S960MC	-
-	S235J2C+N	-	-	-	-
-	S235J0C+N	-	-	-	-
-	S235JRC+AR	-	-	-	-

*For products produced in the Netherlands click here.

Supply - product conditions

Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:

Side/surface condition	non-pickled	pickled	pickled and oiled
Mill edges	Yes	Yes	Yes
Trimmed edges	-	Yes	Yes

Trimmed edges available in thicknesses up to 5.0 mm.
Please contact us regarding other specifications we may have that meet your needs.

Surface aspects

Description	Availability
Surface finish	Coils are available in non-pickled and pickled finish for most grades. For grade specific availability, please refer to the dimensional tables.
Oiling	Pickled finish is available with rolling or preservative oil applied. Oil weight normally 0.4-1.8 g/m²

Alternative oiling ranges are available.
Please contact us for details.

Certification

Test certificates 2.2/3.1 are available according to EN 10204.

EN-Product-Hot-rolled-All grades Surface aspects Supply Conditions TSUK

Supply Conditions

Supply - product conditions

Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:

Side/surface condition	non-pickled	pickled	pickled and oiled
Mill edges	Yes	Yes	Yes
Trimmed edges	-	Yes	Yes

Trimmed edges available in thicknesses up to 5.0 mm.
Please contact us regarding other specifications we may have that meet your needs.

Surface aspects

Description	Availability
Surface finish	Coils are available in non-pickled and pickled finish for most grades. For grade specific availability, please refer to the dimensional tables.
Oiling	Pickled finish is available with rolling or preservative oil applied. Oil weight normally 0.4-1.8 g/m²

Alternative oiling ranges are available.
Please contact us for details.

Certification

Test certificates 2.2/3.1 are available according to EN 10204.

EN-Product-Hot-Rolled-HSS-Tenform XF315-Properties TSUK

Properties

Mechanical Properties

Steel supplied will comply with the mechanical property limits below.
The values of the tensile test apply to test bars parallel to the rolling direction.
The values of the bend test apply to test bars transverse to the rolling direction.

Grade		Tenform XF315
Min. Yield strength R_eH¹	N/mm²	315
Tensile strength R_m	N/mm²	3900-510
Min. elongation after fracture A%	t < 3	24
	3 ≤ t < 5	27
	t ≥ 5	24
Min. bend test diameter	t < 5	0 t
Min. bend test diameter	t ≥ 5	0 t

^1. Upper yield strength or 0.2% proof stress applies.
t – material thickness in mm.
Elongation test piece length L₀ = 80 mm for t < 3 mm. L₀ = 5.65√S₀ for t ≥ 3 mm.

Impact strength

Impact tests can be performed for thicknesses ≥ 6.0 mm. Please contact us for details.

Chemical composition

Steel supplied will comply with the chemical limits below.

Grade		Tenform XF315
C	Max.	0.1
Mn	Max.	1.2
P	Max.	0.025
S	Max.	0.01
Si	Max.	0.03
Micro-alloying elements (e.g. Nb)		0.3

All values are in weight%

EN-Product-Hot-Rolled-HSS-Tenform XF315-Dimensions TSUK

Dimensions

Dimensional capability - non-pickled

Dimensions in mm.

Thickness	Max. width
From - up to	Tenform XF315
1.50 - 1.60	1090
1.60 - 1.90	1250
1.90 - 2.00	1350
2.00 - 2.50	1500
2.50 - 8.00	1625

The minimum width is 900 mm. Other dimensions are available - please contact us.

Dimensional capability - pickled

Dimensions in mm.

Thickness	Max. width
From - up to	Tenform XF315
1.50 - 1.60	1090
1.60 - 1.90	1250
1.90 - 2.00	1350
2.00 - 2.50	1500
2.50 - 5.00	1530

The minimum width is 900 mm. Other dimensions are available - please contact us.
For trimmed dimensions reduce max. width by 23 mm.

Tolerances

Tolerances for wide strip and slit wide strip comply with standard EN 10051: 2010.
Tighter tolerances are available, please contact us.

EN-Product-Hot-rolled-All grades Shape and dimensional tolerances TSUK

Shape and dimensional tolerances

The specified values for wide strip do not apply to the uncropped ends of the coil (‘head’ and ‘tail’). The length of these uncropped ends is calculated using the following formula:

length (in metres) = 90/nominal thickness (in mm), with a maximum of 20 metres.

If required, this part of the coil can be removed, however an additional cost may be charged for this.

Tolerances on thickness

Tata Steel can supply to full thickness tolerance specified in EN 10051:2010.

Tighter tolerances are available as shown below:

Product family	Thickness tolerances available (% of full EN 10051:2010 tolerance)
	100%	75%	66%	50%
Steel for forming	Yes	Yes	Yes	(see note 1)
High-strength low-alloy (HSLA)	Yes	Yes	Yes	Yes
AHSS	Yes	Yes	Yes	Yes
Structural steel	Yes	Yes	Yes	Yes
Boron manganese steel	Yes	Yes	Yes
Steel for gas cylinders	Yes

¹ Please contact us for tolerances below 66%
Please contact us on the availability of special tolerances to meet your requirements.

Tolerances on thickness for hot-rolled steel with a low carbon content for cold forming
(DD11-DD14 in EN 10111:2008)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.13	± 0.14	± 0.16	-
> 2.00	≤ 2.50	± 0.14	± 0.16	± 0.17	± 0.19
> 2.50	≤ 3.00	± 0.15	± 0.17	± 0.18	± 0.20
> 3.00	≤ 4.00	± 0.17	± 0.18	± 0.20	± 0.20
> 4.00	≤ 5.00	± 0.18	± 0.20	± 0.21	± 0.22
> 5.00	≤ 6.00	± 0.20	± 0.21	± 0.22	± 0.23
> 6.00	≤ 8.00	± 0.22	± 0.23	± 0.23	± 0.26
> 8.00	≤ 11.00	± 0.24	± 0.25	± 0.25	± 0.28

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum yield strength
R_e ≤ 300 N/mm² (category A)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.17	± 0.19	± 0.21	-
> 2.00	≤ 2.50	± 0.18	± 0.21	± 0.23	± 0.25
> 2.50	≤ 3.00	± 0.20	± 0.22	± 0.24	± 0.26
> 3.00	≤ 4.00	± 0.22	± 0.24	± 0.26	± 0.27
> 4.00	≤ 5.00	± 0.24	± 0.26	± 0.28	± 0.29
> 5.00	≤ 6.00	± 0.26	± 0.28	± 0.29	± 0.31
> 6.00	≤ 8.00	± 0.29	± 0.30	± 0.31	± 0.35
> 8.00	≤ 10.00	± 0.32	± 0.33	± 0.34	± 0.40
> 10.00	≤ 12.50	± 0.35	± 0.36	± 0.37	± 0.43
> 12.50	≤ 15.00	± 0.37	± 0.38	± 0.40	± 0.46
> 15.00	≤ 25.00	± 0.40	± 0.42	± 0.45	± 0.50

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum yield strength
300 N/mm² < R_e ≤ 360 N/mm² (category B)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.20	± 0.22	± 0.24	-
> 2.00	≤ 2.50	± 0.21	± 0.24	± 0.26	± 0.29
> 2.50	≤ 3.00	± 0.23	± 0.25	± 0.28	± 0.30
> 3.00	≤ 4.00	± 0.25	± 0.28	± 0.30	± 0.31
> 4.00	≤ 5.00	± 0.28	± 0.30	± 0.32	± 0.33
> 5.00	≤ 6.00	± 0.30	± 0.32	± 0.33	± 0.36
> 6.00	≤ 8.00	± 0.33	± 0.35	± 0.36	± 0.40
> 8.00	≤ 10.00	± 0.37	± 0.38	± 0.39	± 0.46
> 10.00	≤ 12.50	± 0.40	± 0.41	± 0.43	± 0.49
> 12.50	≤ 15.00	± 0.43	± 0.44	± 0.46	± 0.53
> 15.00	≤ 25.00	± 0.46	± 0.48	± 0.52	± 0.58

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum yield strength
360 N/mm² < R_e ≤ 420 N/mm² (category C)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.22	± 0.25	± 0.27	-
> 2.00	≤ 2.50	± 0.23	± 0.27	± 0.30	± 0.33
> 2.50	≤ 3.00	± 0.26	± 0.29	± 0.31	± 0.34
> 3.00	≤ 4.00	± 0.29	± 0.31	± 0.34	± 0.35
> 4.00	≤ 5.00	± 0.31	± 0.34	± 0.36	± 0.38
> 5.00	≤ 6.00	± 0.34	± 0.36	± 0.38	± 0.40
> 6.00	≤ 8.00	± 0.38	± 0.39	± 0.40	± 0.46
> 8.00	≤ 10.00	± 0.42	± 0.43	± 0.44	± 0.52
> 10.00	≤ 12.50	± 0.46	± 0.47	± 0.48	± 0.56
> 12.50	≤ 15.00	± 0.48	± 0.49	± 0.52	± 0.60
> 15.00	≤ 25.00	± 0.52	± 0.55	± 0.59	± 0.65

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum yield strength
420 N/mm² < R_e ≤ 900 N/mm² (category D)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.24	± 0.27	± 0.29	-
> 2.00	≤ 2.50	± 0.25	± 0.29	± 0.32	± 0.35
> 2.50	≤ 3.00	± 0.28	± 0.31	± 0.34	± 0.36
> 3.00	≤ 4.00	± 0.31	± 0.34	± 0.36	± 0.38
> 4.00	≤ 5.00	± 0.34	± 0.36	± 0.39	± 0.41
> 5.00	≤ 6.00	± 0.36	± 0.39	± 0.41	± 0.43
> 6.00	≤ 8.00	± 0.41	± 0.42	± 0.43	± 0.49
> 8.00	≤ 10.00	± 0.45	± 0.46	± 0.48	± 0.56
> 10.00	≤ 12.50	± 0.49	± 0.50	± 0.52	± 0.60
> 12.50	≤ 15.00	± 0.52	± 0.53	± 0.56	± 0.64
> 15.00	≤ 25.00	± 0.56	± 0.59	± 0.63	± 0.70

All dimensions are mm.

Tolerances on width

Tolerances in mm.

Nominal width w
	Mill edges		Trimmed edges
	lower	upper	lower	upper
w ≤ 1200	0	20	0	3
1200 < w ≤ 1850	0	20	0	5
w > 1850	0	25	0	6

Tolerances in mm for wide strip and slit wide strip
The tolerances for wide strip and slit wide strip comply with standard EN 10051:2010.

The specified values for wide strip do not apply to the uncropped ends of the coil (‘head’ and ‘tail’). The length of these uncropped ends is calculated using the following formula:
length (in metres) = 90/nominal thickness (in mm), with a maximum of 20 metres.

If required, this part of the coil can be removed, however an additional cost may be charged for this.

Edge camber

The deviation from the edge over a length of 5000mm:

• with mill edges, no more than 20mm
• with trimmed edges, no more than 15mm

Flatness

Requirements as regards flatness can be agreed at the time of enquiry.

Option for maximum crown values

The following high crown C40 options available for hot-rolled products.

Crown values on the C20-position as well as minimum crown values on both C20 and C40 position are also available on request.

Maximum Crown C40 in µm values for hot-rolled steel with a low carbon content for cold forming
(DD11-DD14 in EN 10111:2008)

Category 1		C40
Nominal Thickness		≤ 1200	> 1200	> 1500	> 1800
Nominal Thickness		≤ 1200	≤ 1500	≤ 1800	> 1800
> 1.47	≤ 2.00	40	40	40	40
> 2.00	≤ 2.50	40	40	50	50
> 2.50	≤ 3.00	40	40	50	50
> 3.00	≤ 6.00	40	50	50	50
> 6.00	≤ 11.00	50	50	50	50

Maximum Crown C40 in µm values of structural steel grades
(S185-S235-S275 ≤ 10mm in EN 10025-2:2004)

Category 2		C40
Nominal Thickness		≤ 1200	> 1200	> 1500	> 1800
Nominal Thickness		≤ 1200	≤ 1500	≤ 1800	> 1800
> 1.47	≤ 2.00	40	40	40	40
> 2.00	≤ 2.50	40	40	50	50
> 2.50	≤ 20.00	50	50	50	50

Maximum Crown C40 in µm values of structural steel grades(S275 > 10mm in EN 10025-2:2004)
and HSLA grades (S315MC in EN 10149-2:1996)

Category 3		C40
Nominal Thickness		≤ 1200	> 1200	> 1500	> 1800
Nominal Thickness		≤ 1200	≤ 1500	≤ 1800	> 1800
> 1.47	≤ 2.00	50	50	60	60
> 2.00	≤ 2.50	50	60	60	60
> 2.50	≤ 3.00	50	60	60	60
> 3.00	≤ 20.00	60	60	70	70

Maximum Crown C40 in µm values of HSLA grades
(S355MC, S420MC, S460MC, S500MC, S550MC in EN 10149-2:1996)

Category 4		C40
Nominal Thickness		≤ 1200	> 1200	> 1500	> 1800
Nominal Thickness		≤ 1200	≤ 1500	≤ 1800	> 1800
> 1.47	≤ 2.00	60	70	70	70
> 2.00	≤ 2.50	60	70	80	80
> 2.50	≤ 3.00	60	70	80	80
> 3.00	≤ 5.00	70	70	80	80
> 5.00	≤ 20.00	80	80	80	80

Dimensions and coil weights

Tata Steel can supply hot-rolled steels with the following minimum and maximum dimensions and weights:

Description	Availability
Coil diameter inner non-pickled	762mm
Coil diameter inner pickled	610mm standard
Tolerance on inner diameter	+0/-50mm
Coil diameter outer non-pickled	Outer diameter available is 10/7 x width
	to reduce possibility of coil tipping over
	Max. 2200mm
	Min. 1050mm
Coil diameter outer pickled and oiled	Outer diameter available is 10/7 x width
	to reduce possibility of coil tipping over
	Outer diameter
	limit 2200mm
	Min. 1050mm
Coil weight	Max. 32 tonnes
	Additional maximum limits from transport
	limits and outer coil diameter
	Some HR products may have different
	coil weight ranges
Minimum tonnage per order	Please refer to price list for order quantity details
Minimum tonnage per order	Minimum order quantities may apply

EN-Product-Hot-rolled-Heavy+Light further processing TSUK

Further processing

We have a broad network of Tata Steel service centres across Europe, offering decoiling and slitting services from stock and against short lead times.

Heavy gauge processing

Processing type	Decoiling
Thickness range (mm)	1.4 - 25.4
Width range (mm)	300 - 2600
Length range	up to 18.4m
Locations	UK Netherlands

Light gauge processing

Processing type	Slitting	Decoiling	Blanking
Thickness range (mm)	0.2 - 7.0	0.3 - 6.0	0.3 - 6.0
Width range (mm)	10 - 2050	50 - 2600	200 - 2600
Length range	-	up to 6m	up to 6m
Locations	UK Ireland Netherlands Germany France Spain Sweden Norway Finland	UK Ireland Netherlands Germany France Spain Sweden Norway Finland	UK Ireland

For further information please visit our Service Centre webpages.

EN-Product-Hot-Rolled-HSS-Tenform XF355 TSUK

XF355

Specification details for XF355

EN-Product-Hot-Rolled-HSS-All grades Overview TSUK

Overview

Our high-strength steel grades have been developed to meet a wide variety of applications. The consistent quality of these steels means they can be relied on to deliver benefits for your end-products and processes.

Applications

Agricultural machinery
Chassis and suspension components and assemblies
Containers
Cranes and crane booms
Earth-moving equipment
Lightweight towers
Radiator components
Safety-critical applications
Racking and shelving
Telescopic booms
Tow hooks
Train carriages

Relationship with standards

Tata Steel’s high-strength low-alloy steels comply with the following standards:

EN 10149-2: 2013	EN 10025-2: 2004	VDA	Tata Steel	Tata Steel	Germany SEW 092
Grade	Grade	Grade	Grade	Grade*	Grade
S315MC	-	HR300LA	Tenform XF315	Ympress S315MC	QStE340TM
S355MC	-	HR340LA	Tenform XF355	Ympress S355MC	QStE380TM
S420MC	-	HR420LA	Tenform XF420	Ympress S420MC	QStE460TM
S460MC	-	HR460LA	Tenform XF460	Ympress S460MC	QStE500TM
S500MC	-	HR500LA	Tenform XF500	Ympress S500MC	QStE550TM
S550MC*	-	-	-	Ympress S550MC	-
S650MC*	-	-	-	Ympress S650MC	-
-	-	-	-	Ympress E690TM	QStE690TM
S700MC*	-	HR700LA	-	Ympress S700MC	-
S960MC*	-	HR960LA	-	Ympress S960MC	-
-	S235J2C+N	-	-	-	-
-	S235J0C+N	-	-	-	-
-	S235JRC+AR	-	-	-	-

*For products produced in the Netherlands click here.

Supply - product conditions

Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:

Side/surface condition	non-pickled	pickled	pickled and oiled
Mill edges	Yes	Yes	Yes
Trimmed edges	-	Yes	Yes

Trimmed edges available in thicknesses up to 5.0 mm.
Please contact us regarding other specifications we may have that meet your needs.

Surface aspects

Description	Availability
Surface finish	Coils are available in non-pickled and pickled finish for most grades. For grade specific availability, please refer to the dimensional tables.
Oiling	Pickled finish is available with rolling or preservative oil applied. Oil weight normally 0.4-1.8 g/m²

Alternative oiling ranges are available.
Please contact us for details.

Certification

Test certificates 2.2/3.1 are available according to EN 10204.

EN-Product-Hot-rolled-All grades Surface aspects Supply Conditions TSUK

Supply Conditions

Supply - product conditions

Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:

Side/surface condition	non-pickled	pickled	pickled and oiled
Mill edges	Yes	Yes	Yes
Trimmed edges	-	Yes	Yes

Trimmed edges available in thicknesses up to 5.0 mm.
Please contact us regarding other specifications we may have that meet your needs.

Surface aspects

Description	Availability
Surface finish	Coils are available in non-pickled and pickled finish for most grades. For grade specific availability, please refer to the dimensional tables.
Oiling	Pickled finish is available with rolling or preservative oil applied. Oil weight normally 0.4-1.8 g/m²

Alternative oiling ranges are available.
Please contact us for details.

Certification

Test certificates 2.2/3.1 are available according to EN 10204.

EN-Product-Hot-Rolled-HSS-Tenform XF355-Properties TSUK

Properties

Mechanical Properties

Steel supplied will comply with the mechanical property limits below.
The values of the tensile test apply to test bars parallel to the rolling direction.
The values of the bend test apply to test bars transverse to the rolling direction.

Grade		Tenform XF355
Min. Yield strength R_eH¹	N/mm²	355
Tensile strength R_m	N/mm²	430-550
Min. elongation after fracture A%	t < 3	23
	3 ≤ t < 5	26
	t ≥ 5	23
Min. bend test diameter	t < 5	0.5 t
Min. bend test diameter	t ≥ 5	0.5 t

^1. Upper yield strength or 0.2% proof stress applies.
t – material thickness in mm.
Elongation test piece length L₀ = 80 mm for t < 3 mm. L₀ = 5.65√S₀ for t ≥ 3 mm.

Impact strength

Impact tests can be performed for thicknesses ≥ 6.0 mm. Please contact us for details.

Chemical composition

Steel supplied will comply with the chemical limits below.

Grade		Tenform XF355
C	Max.	0.1
Mn	Max.	1.5
P	Max.	0.025
S	Max.	0.01
Si	Max.	0.03
Micro-alloying elements (e.g. Nb)		0.3

All values are in weight%

EN-Product-Hot-Rolled-HSS-Tenform XF355-Dimensions TSUK

Dimensions

Dimensional capability - non-pickled

Dimensions in mm.

Thickness	Max. width
From - up to	Tenform XF355
1.50 - 1.60	1060
1.60 - 2.00	1250
2.00 - 2.20	1360
2.20 - 2.40	1390
2.40 - 2.80	1530
2.80 - 5.00	1560
5.00 - 6.00	1600
6.00 - 15.00	1625

The minimum width is 900 mm. Other dimensions are available - please contact us.

Dimensional capability - pickled

Dimensions in mm.

Thickness	Max. width
From - up to	Tenform XF355
1.50 - 1.60	1100
1.60 - 2.00	1250
2.00 - 2.20	1360
2.20 - 2.40	1400
2.40 - 5.00	1530

The minimum width is 900 mm. Other dimensions are available - please contact us.
For trimmed dimensions reduce max. width by 23 mm.

Tolerances

Tolerances for wide strip and slit wide strip comply with standard EN 10051: 2010.
Tighter tolerances are available, please contact us.

EN-Product-Hot-rolled-All grades Shape and dimensional tolerances TSUK

Shape and dimensional tolerances

The specified values for wide strip do not apply to the uncropped ends of the coil (‘head’ and ‘tail’). The length of these uncropped ends is calculated using the following formula:

length (in metres) = 90/nominal thickness (in mm), with a maximum of 20 metres.

If required, this part of the coil can be removed, however an additional cost may be charged for this.

Tolerances on thickness

Tata Steel can supply to full thickness tolerance specified in EN 10051:2010.

Tighter tolerances are available as shown below:

Product family	Thickness tolerances available (% of full EN 10051:2010 tolerance)
	100%	75%	66%	50%
Steel for forming	Yes	Yes	Yes	(see note 1)
High-strength low-alloy (HSLA)	Yes	Yes	Yes	Yes
AHSS	Yes	Yes	Yes	Yes
Structural steel	Yes	Yes	Yes	Yes
Boron manganese steel	Yes	Yes	Yes
Steel for gas cylinders	Yes

¹ Please contact us for tolerances below 66%
Please contact us on the availability of special tolerances to meet your requirements.

Tolerances on thickness for hot-rolled steel with a low carbon content for cold forming
(DD11-DD14 in EN 10111:2008)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.13	± 0.14	± 0.16	-
> 2.00	≤ 2.50	± 0.14	± 0.16	± 0.17	± 0.19
> 2.50	≤ 3.00	± 0.15	± 0.17	± 0.18	± 0.20
> 3.00	≤ 4.00	± 0.17	± 0.18	± 0.20	± 0.20
> 4.00	≤ 5.00	± 0.18	± 0.20	± 0.21	± 0.22
> 5.00	≤ 6.00	± 0.20	± 0.21	± 0.22	± 0.23
> 6.00	≤ 8.00	± 0.22	± 0.23	± 0.23	± 0.26
> 8.00	≤ 11.00	± 0.24	± 0.25	± 0.25	± 0.28

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum yield strength
R_e ≤ 300 N/mm² (category A)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.17	± 0.19	± 0.21	-
> 2.00	≤ 2.50	± 0.18	± 0.21	± 0.23	± 0.25
> 2.50	≤ 3.00	± 0.20	± 0.22	± 0.24	± 0.26
> 3.00	≤ 4.00	± 0.22	± 0.24	± 0.26	± 0.27
> 4.00	≤ 5.00	± 0.24	± 0.26	± 0.28	± 0.29
> 5.00	≤ 6.00	± 0.26	± 0.28	± 0.29	± 0.31
> 6.00	≤ 8.00	± 0.29	± 0.30	± 0.31	± 0.35
> 8.00	≤ 10.00	± 0.32	± 0.33	± 0.34	± 0.40
> 10.00	≤ 12.50	± 0.35	± 0.36	± 0.37	± 0.43
> 12.50	≤ 15.00	± 0.37	± 0.38	± 0.40	± 0.46
> 15.00	≤ 25.00	± 0.40	± 0.42	± 0.45	± 0.50

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum yield strength
300 N/mm² < R_e ≤ 360 N/mm² (category B)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.20	± 0.22	± 0.24	-
> 2.00	≤ 2.50	± 0.21	± 0.24	± 0.26	± 0.29
> 2.50	≤ 3.00	± 0.23	± 0.25	± 0.28	± 0.30
> 3.00	≤ 4.00	± 0.25	± 0.28	± 0.30	± 0.31
> 4.00	≤ 5.00	± 0.28	± 0.30	± 0.32	± 0.33
> 5.00	≤ 6.00	± 0.30	± 0.32	± 0.33	± 0.36
> 6.00	≤ 8.00	± 0.33	± 0.35	± 0.36	± 0.40
> 8.00	≤ 10.00	± 0.37	± 0.38	± 0.39	± 0.46
> 10.00	≤ 12.50	± 0.40	± 0.41	± 0.43	± 0.49
> 12.50	≤ 15.00	± 0.43	± 0.44	± 0.46	± 0.53
> 15.00	≤ 25.00	± 0.46	± 0.48	± 0.52	± 0.58

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum yield strength
360 N/mm² < R_e ≤ 420 N/mm² (category C)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.22	± 0.25	± 0.27	-
> 2.00	≤ 2.50	± 0.23	± 0.27	± 0.30	± 0.33
> 2.50	≤ 3.00	± 0.26	± 0.29	± 0.31	± 0.34
> 3.00	≤ 4.00	± 0.29	± 0.31	± 0.34	± 0.35
> 4.00	≤ 5.00	± 0.31	± 0.34	± 0.36	± 0.38
> 5.00	≤ 6.00	± 0.34	± 0.36	± 0.38	± 0.40
> 6.00	≤ 8.00	± 0.38	± 0.39	± 0.40	± 0.46
> 8.00	≤ 10.00	± 0.42	± 0.43	± 0.44	± 0.52
> 10.00	≤ 12.50	± 0.46	± 0.47	± 0.48	± 0.56
> 12.50	≤ 15.00	± 0.48	± 0.49	± 0.52	± 0.60
> 15.00	≤ 25.00	± 0.52	± 0.55	± 0.59	± 0.65

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum yield strength
420 N/mm² < R_e ≤ 900 N/mm² (category D)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.24	± 0.27	± 0.29	-
> 2.00	≤ 2.50	± 0.25	± 0.29	± 0.32	± 0.35
> 2.50	≤ 3.00	± 0.28	± 0.31	± 0.34	± 0.36
> 3.00	≤ 4.00	± 0.31	± 0.34	± 0.36	± 0.38
> 4.00	≤ 5.00	± 0.34	± 0.36	± 0.39	± 0.41
> 5.00	≤ 6.00	± 0.36	± 0.39	± 0.41	± 0.43
> 6.00	≤ 8.00	± 0.41	± 0.42	± 0.43	± 0.49
> 8.00	≤ 10.00	± 0.45	± 0.46	± 0.48	± 0.56
> 10.00	≤ 12.50	± 0.49	± 0.50	± 0.52	± 0.60
> 12.50	≤ 15.00	± 0.52	± 0.53	± 0.56	± 0.64
> 15.00	≤ 25.00	± 0.56	± 0.59	± 0.63	± 0.70

All dimensions are mm.

Tolerances on width

Tolerances in mm.

Nominal width w
	Mill edges		Trimmed edges
	lower	upper	lower	upper
w ≤ 1200	0	20	0	3
1200 < w ≤ 1850	0	20	0	5
w > 1850	0	25	0	6

Tolerances in mm for wide strip and slit wide strip
The tolerances for wide strip and slit wide strip comply with standard EN 10051:2010.

The specified values for wide strip do not apply to the uncropped ends of the coil (‘head’ and ‘tail’). The length of these uncropped ends is calculated using the following formula:
length (in metres) = 90/nominal thickness (in mm), with a maximum of 20 metres.

If required, this part of the coil can be removed, however an additional cost may be charged for this.

Edge camber

The deviation from the edge over a length of 5000mm:

• with mill edges, no more than 20mm
• with trimmed edges, no more than 15mm

Flatness

Requirements as regards flatness can be agreed at the time of enquiry.

Option for maximum crown values

The following high crown C40 options available for hot-rolled products.

Crown values on the C20-position as well as minimum crown values on both C20 and C40 position are also available on request.

Maximum Crown C40 in µm values for hot-rolled steel with a low carbon content for cold forming
(DD11-DD14 in EN 10111:2008)

Category 1		C40
Nominal Thickness		≤ 1200	> 1200	> 1500	> 1800
Nominal Thickness		≤ 1200	≤ 1500	≤ 1800	> 1800
> 1.47	≤ 2.00	40	40	40	40
> 2.00	≤ 2.50	40	40	50	50
> 2.50	≤ 3.00	40	40	50	50
> 3.00	≤ 6.00	40	50	50	50
> 6.00	≤ 11.00	50	50	50	50

Maximum Crown C40 in µm values of structural steel grades
(S185-S235-S275 ≤ 10mm in EN 10025-2:2004)

Category 2		C40
Nominal Thickness		≤ 1200	> 1200	> 1500	> 1800
Nominal Thickness		≤ 1200	≤ 1500	≤ 1800	> 1800
> 1.47	≤ 2.00	40	40	40	40
> 2.00	≤ 2.50	40	40	50	50
> 2.50	≤ 20.00	50	50	50	50

Maximum Crown C40 in µm values of structural steel grades(S275 > 10mm in EN 10025-2:2004)
and HSLA grades (S315MC in EN 10149-2:1996)

Category 3		C40
Nominal Thickness		≤ 1200	> 1200	> 1500	> 1800
Nominal Thickness		≤ 1200	≤ 1500	≤ 1800	> 1800
> 1.47	≤ 2.00	50	50	60	60
> 2.00	≤ 2.50	50	60	60	60
> 2.50	≤ 3.00	50	60	60	60
> 3.00	≤ 20.00	60	60	70	70

Maximum Crown C40 in µm values of HSLA grades
(S355MC, S420MC, S460MC, S500MC, S550MC in EN 10149-2:1996)

Category 4		C40
Nominal Thickness		≤ 1200	> 1200	> 1500	> 1800
Nominal Thickness		≤ 1200	≤ 1500	≤ 1800	> 1800
> 1.47	≤ 2.00	60	70	70	70
> 2.00	≤ 2.50	60	70	80	80
> 2.50	≤ 3.00	60	70	80	80
> 3.00	≤ 5.00	70	70	80	80
> 5.00	≤ 20.00	80	80	80	80

Dimensions and coil weights

Tata Steel can supply hot-rolled steels with the following minimum and maximum dimensions and weights:

Description	Availability
Coil diameter inner non-pickled	762mm
Coil diameter inner pickled	610mm standard
Tolerance on inner diameter	+0/-50mm
Coil diameter outer non-pickled	Outer diameter available is 10/7 x width
	to reduce possibility of coil tipping over
	Max. 2200mm
	Min. 1050mm
Coil diameter outer pickled and oiled	Outer diameter available is 10/7 x width
	to reduce possibility of coil tipping over
	Outer diameter
	limit 2200mm
	Min. 1050mm
Coil weight	Max. 32 tonnes
	Additional maximum limits from transport
	limits and outer coil diameter
	Some HR products may have different
	coil weight ranges
Minimum tonnage per order	Please refer to price list for order quantity details
Minimum tonnage per order	Minimum order quantities may apply

EN-Product-Hot-rolled-Heavy+Light further processing TSUK

Further processing

We have a broad network of Tata Steel service centres across Europe, offering decoiling and slitting services from stock and against short lead times.

Heavy gauge processing

Processing type	Decoiling
Thickness range (mm)	1.4 - 25.4
Width range (mm)	300 - 2600
Length range	up to 18.4m
Locations	UK Netherlands

Light gauge processing

Processing type	Slitting	Decoiling	Blanking
Thickness range (mm)	0.2 - 7.0	0.3 - 6.0	0.3 - 6.0
Width range (mm)	10 - 2050	50 - 2600	200 - 2600
Length range	-	up to 6m	up to 6m
Locations	UK Ireland Netherlands Germany France Spain Sweden Norway Finland	UK Ireland Netherlands Germany France Spain Sweden Norway Finland	UK Ireland

For further information please visit our Service Centre webpages.

EN-Product-Hot-Rolled-HSS-Tenform XF420 TSUK

XF420

Specification details for XF420

EN-Product-Hot-Rolled-HSS-All grades Overview TSUK

Overview

Our high-strength steel grades have been developed to meet a wide variety of applications. The consistent quality of these steels means they can be relied on to deliver benefits for your end-products and processes.

Applications

Agricultural machinery
Chassis and suspension components and assemblies
Containers
Cranes and crane booms
Earth-moving equipment
Lightweight towers
Radiator components
Safety-critical applications
Racking and shelving
Telescopic booms
Tow hooks
Train carriages

Relationship with standards

Tata Steel’s high-strength low-alloy steels comply with the following standards:

EN 10149-2: 2013	EN 10025-2: 2004	VDA	Tata Steel	Tata Steel	Germany SEW 092
Grade	Grade	Grade	Grade	Grade*	Grade
S315MC	-	HR300LA	Tenform XF315	Ympress S315MC	QStE340TM
S355MC	-	HR340LA	Tenform XF355	Ympress S355MC	QStE380TM
S420MC	-	HR420LA	Tenform XF420	Ympress S420MC	QStE460TM
S460MC	-	HR460LA	Tenform XF460	Ympress S460MC	QStE500TM
S500MC	-	HR500LA	Tenform XF500	Ympress S500MC	QStE550TM
S550MC*	-	-	-	Ympress S550MC	-
S650MC*	-	-	-	Ympress S650MC	-
-	-	-	-	Ympress E690TM	QStE690TM
S700MC*	-	HR700LA	-	Ympress S700MC	-
S960MC*	-	HR960LA	-	Ympress S960MC	-
-	S235J2C+N	-	-	-	-
-	S235J0C+N	-	-	-	-
-	S235JRC+AR	-	-	-	-

*For products produced in the Netherlands click here.

Supply - product conditions

Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:

Side/surface condition	non-pickled	pickled	pickled and oiled
Mill edges	Yes	Yes	Yes
Trimmed edges	-	Yes	Yes

Trimmed edges available in thicknesses up to 5.0 mm.
Please contact us regarding other specifications we may have that meet your needs.

Surface aspects

Description	Availability
Surface finish	Coils are available in non-pickled and pickled finish for most grades. For grade specific availability, please refer to the dimensional tables.
Oiling	Pickled finish is available with rolling or preservative oil applied. Oil weight normally 0.4-1.8 g/m²

Alternative oiling ranges are available.
Please contact us for details.

Certification

Test certificates 2.2/3.1 are available according to EN 10204.

EN-Product-Hot-rolled-All grades Surface aspects Supply Conditions TSUK

Supply Conditions

Supply - product conditions

Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:

Side/surface condition	non-pickled	pickled	pickled and oiled
Mill edges	Yes	Yes	Yes
Trimmed edges	-	Yes	Yes

Trimmed edges available in thicknesses up to 5.0 mm.
Please contact us regarding other specifications we may have that meet your needs.

Surface aspects

Description	Availability
Surface finish	Coils are available in non-pickled and pickled finish for most grades. For grade specific availability, please refer to the dimensional tables.
Oiling	Pickled finish is available with rolling or preservative oil applied. Oil weight normally 0.4-1.8 g/m²

Alternative oiling ranges are available.
Please contact us for details.

Certification

Test certificates 2.2/3.1 are available according to EN 10204.

EN-Product-Hot-Rolled-HSS-Tenform XF420-Properties TSUK

Properties

Mechanical Properties

Steel supplied will comply with the mechanical property limits below.
The values of the tensile test apply to test bars parallel to the rolling direction.
The values of the bend test apply to test bars transverse to the rolling direction.

Grade		Tenform XF420
Min. Yield strength R_eH¹	N/mm²	420
Tensile strength R_m	N/mm²	480-620
Min. elongation after fracture A%	t < 3	19
	3 ≤ t < 5	22
	t ≥ 5	19
Min. bend test diameter	t < 5	0 t
Min. bend test diameter	t ≥ 5	0 t

^1. Upper yield strength or 0.2% proof stress applies.
t – material thickness in mm.
Elongation test piece length L₀ = 80 mm for t < 3 mm. L₀ = 5.65√S₀ for t ≥ 3 mm.

Impact strength

Impact tests can be performed for thicknesses ≥ 6.0 mm. Please contact us for details.

Chemical composition

Steel supplied will comply with the chemical limits below.

Grade		Tenform XF420
C	Max.	0.1
Mn	Max.	1.5
P	Max.	0.025
S	Max.	0.01
Si	Max.	0.03
Micro-alloying elements (e.g. Nb)		0.3

All values are in weight%

EN-Product-Hot-Rolled-HSS-Tenform XF420-Dimensions TSUK

Dimensions

Dimensional capability - non-pickled

Dimensions in mm.

Thickness	Max. width
From - up to	Tenform XF420
1.80 - 2.00	1250
2.00 - 2.40	1330
2.40 - 2.50	1350
2.50 - 2.70	1400
2.70 - 4.00	1550
4.00 - 5.00	1560
5.00 - 12.00	1600

The minimum width is 900 mm. Other dimensions are available - please contact us.

Dimensional capability - pickled

Dimensions in mm.

Thickness	Max. width
From - up to	Tenform XF420
1.80 - 1.90	1250
1.90 - 2.00	1360
2.00 - 2.20	1350
2.20 - 2.60	1400
2.60 - 4.00	1550
4.00 - 5.00	1560

The minimum width is 900 mm. Other dimensions are available - please contact us.
For trimmed dimensions reduce max. width by 23 mm.

Tolerances

Tolerances for wide strip and slit wide strip comply with standard EN 10051: 2010.
Tighter tolerances are available, please contact us.

EN-Product-Hot-rolled-All grades Shape and dimensional tolerances TSUK

Shape and dimensional tolerances

The specified values for wide strip do not apply to the uncropped ends of the coil (‘head’ and ‘tail’). The length of these uncropped ends is calculated using the following formula:

length (in metres) = 90/nominal thickness (in mm), with a maximum of 20 metres.

If required, this part of the coil can be removed, however an additional cost may be charged for this.

Tolerances on thickness

Tata Steel can supply to full thickness tolerance specified in EN 10051:2010.

Tighter tolerances are available as shown below:

Product family	Thickness tolerances available (% of full EN 10051:2010 tolerance)
	100%	75%	66%	50%
Steel for forming	Yes	Yes	Yes	(see note 1)
High-strength low-alloy (HSLA)	Yes	Yes	Yes	Yes
AHSS	Yes	Yes	Yes	Yes
Structural steel	Yes	Yes	Yes	Yes
Boron manganese steel	Yes	Yes	Yes
Steel for gas cylinders	Yes

¹ Please contact us for tolerances below 66%
Please contact us on the availability of special tolerances to meet your requirements.

Tolerances on thickness for hot-rolled steel with a low carbon content for cold forming
(DD11-DD14 in EN 10111:2008)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.13	± 0.14	± 0.16	-
> 2.00	≤ 2.50	± 0.14	± 0.16	± 0.17	± 0.19
> 2.50	≤ 3.00	± 0.15	± 0.17	± 0.18	± 0.20
> 3.00	≤ 4.00	± 0.17	± 0.18	± 0.20	± 0.20
> 4.00	≤ 5.00	± 0.18	± 0.20	± 0.21	± 0.22
> 5.00	≤ 6.00	± 0.20	± 0.21	± 0.22	± 0.23
> 6.00	≤ 8.00	± 0.22	± 0.23	± 0.23	± 0.26
> 8.00	≤ 11.00	± 0.24	± 0.25	± 0.25	± 0.28

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum yield strength
R_e ≤ 300 N/mm² (category A)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.17	± 0.19	± 0.21	-
> 2.00	≤ 2.50	± 0.18	± 0.21	± 0.23	± 0.25
> 2.50	≤ 3.00	± 0.20	± 0.22	± 0.24	± 0.26
> 3.00	≤ 4.00	± 0.22	± 0.24	± 0.26	± 0.27
> 4.00	≤ 5.00	± 0.24	± 0.26	± 0.28	± 0.29
> 5.00	≤ 6.00	± 0.26	± 0.28	± 0.29	± 0.31
> 6.00	≤ 8.00	± 0.29	± 0.30	± 0.31	± 0.35
> 8.00	≤ 10.00	± 0.32	± 0.33	± 0.34	± 0.40
> 10.00	≤ 12.50	± 0.35	± 0.36	± 0.37	± 0.43
> 12.50	≤ 15.00	± 0.37	± 0.38	± 0.40	± 0.46
> 15.00	≤ 25.00	± 0.40	± 0.42	± 0.45	± 0.50

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum yield strength
300 N/mm² < R_e ≤ 360 N/mm² (category B)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.20	± 0.22	± 0.24	-
> 2.00	≤ 2.50	± 0.21	± 0.24	± 0.26	± 0.29
> 2.50	≤ 3.00	± 0.23	± 0.25	± 0.28	± 0.30
> 3.00	≤ 4.00	± 0.25	± 0.28	± 0.30	± 0.31
> 4.00	≤ 5.00	± 0.28	± 0.30	± 0.32	± 0.33
> 5.00	≤ 6.00	± 0.30	± 0.32	± 0.33	± 0.36
> 6.00	≤ 8.00	± 0.33	± 0.35	± 0.36	± 0.40
> 8.00	≤ 10.00	± 0.37	± 0.38	± 0.39	± 0.46
> 10.00	≤ 12.50	± 0.40	± 0.41	± 0.43	± 0.49
> 12.50	≤ 15.00	± 0.43	± 0.44	± 0.46	± 0.53
> 15.00	≤ 25.00	± 0.46	± 0.48	± 0.52	± 0.58

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum yield strength
360 N/mm² < R_e ≤ 420 N/mm² (category C)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.22	± 0.25	± 0.27	-
> 2.00	≤ 2.50	± 0.23	± 0.27	± 0.30	± 0.33
> 2.50	≤ 3.00	± 0.26	± 0.29	± 0.31	± 0.34
> 3.00	≤ 4.00	± 0.29	± 0.31	± 0.34	± 0.35
> 4.00	≤ 5.00	± 0.31	± 0.34	± 0.36	± 0.38
> 5.00	≤ 6.00	± 0.34	± 0.36	± 0.38	± 0.40
> 6.00	≤ 8.00	± 0.38	± 0.39	± 0.40	± 0.46
> 8.00	≤ 10.00	± 0.42	± 0.43	± 0.44	± 0.52
> 10.00	≤ 12.50	± 0.46	± 0.47	± 0.48	± 0.56
> 12.50	≤ 15.00	± 0.48	± 0.49	± 0.52	± 0.60
> 15.00	≤ 25.00	± 0.52	± 0.55	± 0.59	± 0.65

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum yield strength
420 N/mm² < R_e ≤ 900 N/mm² (category D)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.24	± 0.27	± 0.29	-
> 2.00	≤ 2.50	± 0.25	± 0.29	± 0.32	± 0.35
> 2.50	≤ 3.00	± 0.28	± 0.31	± 0.34	± 0.36
> 3.00	≤ 4.00	± 0.31	± 0.34	± 0.36	± 0.38
> 4.00	≤ 5.00	± 0.34	± 0.36	± 0.39	± 0.41
> 5.00	≤ 6.00	± 0.36	± 0.39	± 0.41	± 0.43
> 6.00	≤ 8.00	± 0.41	± 0.42	± 0.43	± 0.49
> 8.00	≤ 10.00	± 0.45	± 0.46	± 0.48	± 0.56
> 10.00	≤ 12.50	± 0.49	± 0.50	± 0.52	± 0.60
> 12.50	≤ 15.00	± 0.52	± 0.53	± 0.56	± 0.64
> 15.00	≤ 25.00	± 0.56	± 0.59	± 0.63	± 0.70

All dimensions are mm.

Tolerances on width

Tolerances in mm.

Nominal width w
	Mill edges		Trimmed edges
	lower	upper	lower	upper
w ≤ 1200	0	20	0	3
1200 < w ≤ 1850	0	20	0	5
w > 1850	0	25	0	6

Tolerances in mm for wide strip and slit wide strip
The tolerances for wide strip and slit wide strip comply with standard EN 10051:2010.

The specified values for wide strip do not apply to the uncropped ends of the coil (‘head’ and ‘tail’). The length of these uncropped ends is calculated using the following formula:
length (in metres) = 90/nominal thickness (in mm), with a maximum of 20 metres.

If required, this part of the coil can be removed, however an additional cost may be charged for this.

Edge camber

The deviation from the edge over a length of 5000mm:

• with mill edges, no more than 20mm
• with trimmed edges, no more than 15mm

Flatness

Requirements as regards flatness can be agreed at the time of enquiry.

Option for maximum crown values

The following high crown C40 options available for hot-rolled products.

Crown values on the C20-position as well as minimum crown values on both C20 and C40 position are also available on request.

Maximum Crown C40 in µm values for hot-rolled steel with a low carbon content for cold forming
(DD11-DD14 in EN 10111:2008)

Category 1		C40
Nominal Thickness		≤ 1200	> 1200	> 1500	> 1800
Nominal Thickness		≤ 1200	≤ 1500	≤ 1800	> 1800
> 1.47	≤ 2.00	40	40	40	40
> 2.00	≤ 2.50	40	40	50	50
> 2.50	≤ 3.00	40	40	50	50
> 3.00	≤ 6.00	40	50	50	50
> 6.00	≤ 11.00	50	50	50	50

Maximum Crown C40 in µm values of structural steel grades
(S185-S235-S275 ≤ 10mm in EN 10025-2:2004)

Category 2		C40
Nominal Thickness		≤ 1200	> 1200	> 1500	> 1800
Nominal Thickness		≤ 1200	≤ 1500	≤ 1800	> 1800
> 1.47	≤ 2.00	40	40	40	40
> 2.00	≤ 2.50	40	40	50	50
> 2.50	≤ 20.00	50	50	50	50

Maximum Crown C40 in µm values of structural steel grades(S275 > 10mm in EN 10025-2:2004)
and HSLA grades (S315MC in EN 10149-2:1996)

Category 3		C40
Nominal Thickness		≤ 1200	> 1200	> 1500	> 1800
Nominal Thickness		≤ 1200	≤ 1500	≤ 1800	> 1800
> 1.47	≤ 2.00	50	50	60	60
> 2.00	≤ 2.50	50	60	60	60
> 2.50	≤ 3.00	50	60	60	60
> 3.00	≤ 20.00	60	60	70	70

Maximum Crown C40 in µm values of HSLA grades
(S355MC, S420MC, S460MC, S500MC, S550MC in EN 10149-2:1996)

Category 4		C40
Nominal Thickness		≤ 1200	> 1200	> 1500	> 1800
Nominal Thickness		≤ 1200	≤ 1500	≤ 1800	> 1800
> 1.47	≤ 2.00	60	70	70	70
> 2.00	≤ 2.50	60	70	80	80
> 2.50	≤ 3.00	60	70	80	80
> 3.00	≤ 5.00	70	70	80	80
> 5.00	≤ 20.00	80	80	80	80

Dimensions and coil weights

Tata Steel can supply hot-rolled steels with the following minimum and maximum dimensions and weights:

Description	Availability
Coil diameter inner non-pickled	762mm
Coil diameter inner pickled	610mm standard
Tolerance on inner diameter	+0/-50mm
Coil diameter outer non-pickled	Outer diameter available is 10/7 x width
	to reduce possibility of coil tipping over
	Max. 2200mm
	Min. 1050mm
Coil diameter outer pickled and oiled	Outer diameter available is 10/7 x width
	to reduce possibility of coil tipping over
	Outer diameter
	limit 2200mm
	Min. 1050mm
Coil weight	Max. 32 tonnes
	Additional maximum limits from transport
	limits and outer coil diameter
	Some HR products may have different
	coil weight ranges
Minimum tonnage per order	Please refer to price list for order quantity details
Minimum tonnage per order	Minimum order quantities may apply

EN-Product-Hot-rolled-Heavy+Light further processing TSUK

Further processing

We have a broad network of Tata Steel service centres across Europe, offering decoiling and slitting services from stock and against short lead times.

Heavy gauge processing

Processing type	Decoiling
Thickness range (mm)	1.4 - 25.4
Width range (mm)	300 - 2600
Length range	up to 18.4m
Locations	UK Netherlands

Light gauge processing

Processing type	Slitting	Decoiling	Blanking
Thickness range (mm)	0.2 - 7.0	0.3 - 6.0	0.3 - 6.0
Width range (mm)	10 - 2050	50 - 2600	200 - 2600
Length range	-	up to 6m	up to 6m
Locations	UK Ireland Netherlands Germany France Spain Sweden Norway Finland	UK Ireland Netherlands Germany France Spain Sweden Norway Finland	UK Ireland

For further information please visit our Service Centre webpages.

EN-Product-Hot-Rolled-HSS-Tenform XF460 TSUK

XF460

Specification details for XF460

EN-Product-Hot-Rolled-HSS-All grades Overview TSUK

Overview

Our high-strength steel grades have been developed to meet a wide variety of applications. The consistent quality of these steels means they can be relied on to deliver benefits for your end-products and processes.

Applications

Agricultural machinery
Chassis and suspension components and assemblies
Containers
Cranes and crane booms
Earth-moving equipment
Lightweight towers
Radiator components
Safety-critical applications
Racking and shelving
Telescopic booms
Tow hooks
Train carriages

Relationship with standards

Tata Steel’s high-strength low-alloy steels comply with the following standards:

EN 10149-2: 2013	EN 10025-2: 2004	VDA	Tata Steel	Tata Steel	Germany SEW 092
Grade	Grade	Grade	Grade	Grade*	Grade
S315MC	-	HR300LA	Tenform XF315	Ympress S315MC	QStE340TM
S355MC	-	HR340LA	Tenform XF355	Ympress S355MC	QStE380TM
S420MC	-	HR420LA	Tenform XF420	Ympress S420MC	QStE460TM
S460MC	-	HR460LA	Tenform XF460	Ympress S460MC	QStE500TM
S500MC	-	HR500LA	Tenform XF500	Ympress S500MC	QStE550TM
S550MC*	-	-	-	Ympress S550MC	-
S650MC*	-	-	-	Ympress S650MC	-
-	-	-	-	Ympress E690TM	QStE690TM
S700MC*	-	HR700LA	-	Ympress S700MC	-
S960MC*	-	HR960LA	-	Ympress S960MC	-
-	S235J2C+N	-	-	-	-
-	S235J0C+N	-	-	-	-
-	S235JRC+AR	-	-	-	-

*For products produced in the Netherlands click here.

Supply - product conditions

Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:

Side/surface condition	non-pickled	pickled	pickled and oiled
Mill edges	Yes	Yes	Yes
Trimmed edges	-	Yes	Yes

Trimmed edges available in thicknesses up to 5.0 mm.
Please contact us regarding other specifications we may have that meet your needs.

Surface aspects

Description	Availability
Surface finish	Coils are available in non-pickled and pickled finish for most grades. For grade specific availability, please refer to the dimensional tables.
Oiling	Pickled finish is available with rolling or preservative oil applied. Oil weight normally 0.4-1.8 g/m²

Alternative oiling ranges are available.
Please contact us for details.

Certification

Test certificates 2.2/3.1 are available according to EN 10204.

EN-Product-Hot-rolled-All grades Surface aspects Supply Conditions TSUK

Supply Conditions

Supply - product conditions

Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:

Side/surface condition	non-pickled	pickled	pickled and oiled
Mill edges	Yes	Yes	Yes
Trimmed edges	-	Yes	Yes

Trimmed edges available in thicknesses up to 5.0 mm.
Please contact us regarding other specifications we may have that meet your needs.

Surface aspects

Description	Availability
Surface finish	Coils are available in non-pickled and pickled finish for most grades. For grade specific availability, please refer to the dimensional tables.
Oiling	Pickled finish is available with rolling or preservative oil applied. Oil weight normally 0.4-1.8 g/m²

Alternative oiling ranges are available.
Please contact us for details.

Certification

Test certificates 2.2/3.1 are available according to EN 10204.

EN-Product-Hot-Rolled-HSS-Tenform XF460-Properties TSUK

Properties

Mechanical Properties

Steel supplied will comply with the mechanical property limits below.
The values of the tensile test apply to test bars parallel to the rolling direction.
The values of the bend test apply to test bars transverse to the rolling direction.

Grade		Tenform XF460
Min. Yield strength R_eH¹	N/mm²	460
Tensile strength R_m	N/mm²	550-670
Min. elongation after fracture A%	t < 3	17
	3 ≤ t < 5	20
	t ≥ 5	17
Min. bend test diameter	t < 5	0 t
Min. bend test diameter	t ≥ 5	0.5 t

^1. Upper yield strength or 0.2% proof stress applies.
t – material thickness in mm.
Elongation test piece length L₀ = 80 mm for t < 3 mm. L₀ = 5.65√S₀ for t ≥ 3 mm.

Impact strength

Impact tests can be performed for thicknesses ≥ 6.0 mm. Please contact us for details.

Chemical composition

Steel supplied will comply with the chemical limits below.

Grade		Tenform XF460
C	Max.	0.1
Mn	Max.	1.5
P	Max.	0.025
S	Max.	0.01
Si	Max.	0.35
Micro-alloying elements (e.g. Nb)		0.3

All values are in weight%
This grade is not suitable for Class 1 galvanising

EN-Product-Hot-Rolled-HSS-Tenform XF460-Dimensions TSUK

Dimensions

Dimensional capability - non-pickled

Dimensions in mm.

Thickness	Max. width
From - up to	XF460
1.80 - 1.90	1100
1.90 - 2.00	1160
2.00 - 2.20	1260
2.20 - 2.60	1360
2.60 - 4.00	1460
4.00 - 5.00	1530
5.00 - 9.00	1610

The minimum width is 900 mm. Other dimensions are available - please contact us.

Dimensional capability - pickled

Dimensions in mm.

Thickness	Max. width
From - up to	Tenform XF460
1.80 - 1.90	1110
1.90 - 2.00	1160
2.00 - 2.20	1260
2.20 - 2.60	1360
2.60 - 4.00	1460
4.00 - 5.00	1530

The minimum width is 900 mm. Other dimensions are available - please contact us.
For trimmed dimensions reduce max. width by 23 mm.

Tolerances

Tolerances for wide strip and slit wide strip comply with standard EN 10051: 2010.
Tighter tolerances are available, please contact us.

EN-Product-Hot-rolled-All grades Shape and dimensional tolerances TSUK

Shape and dimensional tolerances

The specified values for wide strip do not apply to the uncropped ends of the coil (‘head’ and ‘tail’). The length of these uncropped ends is calculated using the following formula:

length (in metres) = 90/nominal thickness (in mm), with a maximum of 20 metres.

If required, this part of the coil can be removed, however an additional cost may be charged for this.

Tolerances on thickness

Tata Steel can supply to full thickness tolerance specified in EN 10051:2010.

Tighter tolerances are available as shown below:

Product family	Thickness tolerances available (% of full EN 10051:2010 tolerance)
	100%	75%	66%	50%
Steel for forming	Yes	Yes	Yes	(see note 1)
High-strength low-alloy (HSLA)	Yes	Yes	Yes	Yes
AHSS	Yes	Yes	Yes	Yes
Structural steel	Yes	Yes	Yes	Yes
Boron manganese steel	Yes	Yes	Yes
Steel for gas cylinders	Yes

¹ Please contact us for tolerances below 66%
Please contact us on the availability of special tolerances to meet your requirements.

Tolerances on thickness for hot-rolled steel with a low carbon content for cold forming
(DD11-DD14 in EN 10111:2008)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.13	± 0.14	± 0.16	-
> 2.00	≤ 2.50	± 0.14	± 0.16	± 0.17	± 0.19
> 2.50	≤ 3.00	± 0.15	± 0.17	± 0.18	± 0.20
> 3.00	≤ 4.00	± 0.17	± 0.18	± 0.20	± 0.20
> 4.00	≤ 5.00	± 0.18	± 0.20	± 0.21	± 0.22
> 5.00	≤ 6.00	± 0.20	± 0.21	± 0.22	± 0.23
> 6.00	≤ 8.00	± 0.22	± 0.23	± 0.23	± 0.26
> 8.00	≤ 11.00	± 0.24	± 0.25	± 0.25	± 0.28

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum yield strength
R_e ≤ 300 N/mm² (category A)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.17	± 0.19	± 0.21	-
> 2.00	≤ 2.50	± 0.18	± 0.21	± 0.23	± 0.25
> 2.50	≤ 3.00	± 0.20	± 0.22	± 0.24	± 0.26
> 3.00	≤ 4.00	± 0.22	± 0.24	± 0.26	± 0.27
> 4.00	≤ 5.00	± 0.24	± 0.26	± 0.28	± 0.29
> 5.00	≤ 6.00	± 0.26	± 0.28	± 0.29	± 0.31
> 6.00	≤ 8.00	± 0.29	± 0.30	± 0.31	± 0.35
> 8.00	≤ 10.00	± 0.32	± 0.33	± 0.34	± 0.40
> 10.00	≤ 12.50	± 0.35	± 0.36	± 0.37	± 0.43
> 12.50	≤ 15.00	± 0.37	± 0.38	± 0.40	± 0.46
> 15.00	≤ 25.00	± 0.40	± 0.42	± 0.45	± 0.50

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum yield strength
300 N/mm² < R_e ≤ 360 N/mm² (category B)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.20	± 0.22	± 0.24	-
> 2.00	≤ 2.50	± 0.21	± 0.24	± 0.26	± 0.29
> 2.50	≤ 3.00	± 0.23	± 0.25	± 0.28	± 0.30
> 3.00	≤ 4.00	± 0.25	± 0.28	± 0.30	± 0.31
> 4.00	≤ 5.00	± 0.28	± 0.30	± 0.32	± 0.33
> 5.00	≤ 6.00	± 0.30	± 0.32	± 0.33	± 0.36
> 6.00	≤ 8.00	± 0.33	± 0.35	± 0.36	± 0.40
> 8.00	≤ 10.00	± 0.37	± 0.38	± 0.39	± 0.46
> 10.00	≤ 12.50	± 0.40	± 0.41	± 0.43	± 0.49
> 12.50	≤ 15.00	± 0.43	± 0.44	± 0.46	± 0.53
> 15.00	≤ 25.00	± 0.46	± 0.48	± 0.52	± 0.58

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum yield strength
360 N/mm² < R_e ≤ 420 N/mm² (category C)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.22	± 0.25	± 0.27	-
> 2.00	≤ 2.50	± 0.23	± 0.27	± 0.30	± 0.33
> 2.50	≤ 3.00	± 0.26	± 0.29	± 0.31	± 0.34
> 3.00	≤ 4.00	± 0.29	± 0.31	± 0.34	± 0.35
> 4.00	≤ 5.00	± 0.31	± 0.34	± 0.36	± 0.38
> 5.00	≤ 6.00	± 0.34	± 0.36	± 0.38	± 0.40
> 6.00	≤ 8.00	± 0.38	± 0.39	± 0.40	± 0.46
> 8.00	≤ 10.00	± 0.42	± 0.43	± 0.44	± 0.52
> 10.00	≤ 12.50	± 0.46	± 0.47	± 0.48	± 0.56
> 12.50	≤ 15.00	± 0.48	± 0.49	± 0.52	± 0.60
> 15.00	≤ 25.00	± 0.52	± 0.55	± 0.59	± 0.65

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum yield strength
420 N/mm² < R_e ≤ 900 N/mm² (category D)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.24	± 0.27	± 0.29	-
> 2.00	≤ 2.50	± 0.25	± 0.29	± 0.32	± 0.35
> 2.50	≤ 3.00	± 0.28	± 0.31	± 0.34	± 0.36
> 3.00	≤ 4.00	± 0.31	± 0.34	± 0.36	± 0.38
> 4.00	≤ 5.00	± 0.34	± 0.36	± 0.39	± 0.41
> 5.00	≤ 6.00	± 0.36	± 0.39	± 0.41	± 0.43
> 6.00	≤ 8.00	± 0.41	± 0.42	± 0.43	± 0.49
> 8.00	≤ 10.00	± 0.45	± 0.46	± 0.48	± 0.56
> 10.00	≤ 12.50	± 0.49	± 0.50	± 0.52	± 0.60
> 12.50	≤ 15.00	± 0.52	± 0.53	± 0.56	± 0.64
> 15.00	≤ 25.00	± 0.56	± 0.59	± 0.63	± 0.70

All dimensions are mm.

Tolerances on width

Tolerances in mm.

Nominal width w
	Mill edges		Trimmed edges
	lower	upper	lower	upper
w ≤ 1200	0	20	0	3
1200 < w ≤ 1850	0	20	0	5
w > 1850	0	25	0	6

Tolerances in mm for wide strip and slit wide strip
The tolerances for wide strip and slit wide strip comply with standard EN 10051:2010.

The specified values for wide strip do not apply to the uncropped ends of the coil (‘head’ and ‘tail’). The length of these uncropped ends is calculated using the following formula:
length (in metres) = 90/nominal thickness (in mm), with a maximum of 20 metres.

If required, this part of the coil can be removed, however an additional cost may be charged for this.

Edge camber

The deviation from the edge over a length of 5000mm:

• with mill edges, no more than 20mm
• with trimmed edges, no more than 15mm

Flatness

Requirements as regards flatness can be agreed at the time of enquiry.

Option for maximum crown values

The following high crown C40 options available for hot-rolled products.

Crown values on the C20-position as well as minimum crown values on both C20 and C40 position are also available on request.

Maximum Crown C40 in µm values for hot-rolled steel with a low carbon content for cold forming
(DD11-DD14 in EN 10111:2008)

Category 1		C40
Nominal Thickness		≤ 1200	> 1200	> 1500	> 1800
Nominal Thickness		≤ 1200	≤ 1500	≤ 1800	> 1800
> 1.47	≤ 2.00	40	40	40	40
> 2.00	≤ 2.50	40	40	50	50
> 2.50	≤ 3.00	40	40	50	50
> 3.00	≤ 6.00	40	50	50	50
> 6.00	≤ 11.00	50	50	50	50

Maximum Crown C40 in µm values of structural steel grades
(S185-S235-S275 ≤ 10mm in EN 10025-2:2004)

Category 2		C40
Nominal Thickness		≤ 1200	> 1200	> 1500	> 1800
Nominal Thickness		≤ 1200	≤ 1500	≤ 1800	> 1800
> 1.47	≤ 2.00	40	40	40	40
> 2.00	≤ 2.50	40	40	50	50
> 2.50	≤ 20.00	50	50	50	50

Maximum Crown C40 in µm values of structural steel grades(S275 > 10mm in EN 10025-2:2004)
and HSLA grades (S315MC in EN 10149-2:1996)

Category 3		C40
Nominal Thickness		≤ 1200	> 1200	> 1500	> 1800
Nominal Thickness		≤ 1200	≤ 1500	≤ 1800	> 1800
> 1.47	≤ 2.00	50	50	60	60
> 2.00	≤ 2.50	50	60	60	60
> 2.50	≤ 3.00	50	60	60	60
> 3.00	≤ 20.00	60	60	70	70

Maximum Crown C40 in µm values of HSLA grades
(S355MC, S420MC, S460MC, S500MC, S550MC in EN 10149-2:1996)

Category 4		C40
Nominal Thickness		≤ 1200	> 1200	> 1500	> 1800
Nominal Thickness		≤ 1200	≤ 1500	≤ 1800	> 1800
> 1.47	≤ 2.00	60	70	70	70
> 2.00	≤ 2.50	60	70	80	80
> 2.50	≤ 3.00	60	70	80	80
> 3.00	≤ 5.00	70	70	80	80
> 5.00	≤ 20.00	80	80	80	80

Dimensions and coil weights

Tata Steel can supply hot-rolled steels with the following minimum and maximum dimensions and weights:

Description	Availability
Coil diameter inner non-pickled	762mm
Coil diameter inner pickled	610mm standard
Tolerance on inner diameter	+0/-50mm
Coil diameter outer non-pickled	Outer diameter available is 10/7 x width
	to reduce possibility of coil tipping over
	Max. 2200mm
	Min. 1050mm
Coil diameter outer pickled and oiled	Outer diameter available is 10/7 x width
	to reduce possibility of coil tipping over
	Outer diameter
	limit 2200mm
	Min. 1050mm
Coil weight	Max. 32 tonnes
	Additional maximum limits from transport
	limits and outer coil diameter
	Some HR products may have different
	coil weight ranges
Minimum tonnage per order	Please refer to price list for order quantity details
Minimum tonnage per order	Minimum order quantities may apply

EN-Product-Hot-rolled-Heavy+Light further processing TSUK

Further processing

We have a broad network of Tata Steel service centres across Europe, offering decoiling and slitting services from stock and against short lead times.

Heavy gauge processing

Processing type	Decoiling
Thickness range (mm)	1.4 - 25.4
Width range (mm)	300 - 2600
Length range	up to 18.4m
Locations	UK Netherlands

Light gauge processing

Processing type	Slitting	Decoiling	Blanking
Thickness range (mm)	0.2 - 7.0	0.3 - 6.0	0.3 - 6.0
Width range (mm)	10 - 2050	50 - 2600	200 - 2600
Length range	-	up to 6m	up to 6m
Locations	UK Ireland Netherlands Germany France Spain Sweden Norway Finland	UK Ireland Netherlands Germany France Spain Sweden Norway Finland	UK Ireland

For further information please visit our Service Centre webpages.

EN-Product-Hot-Rolled-HSS-Tenform XF500 TSUK

XF500

Specification details for XF500

EN-Product-Hot-Rolled-HSS-All grades Overview TSUK

Overview

Our high-strength steel grades have been developed to meet a wide variety of applications. The consistent quality of these steels means they can be relied on to deliver benefits for your end-products and processes.

Applications

Agricultural machinery
Chassis and suspension components and assemblies
Containers
Cranes and crane booms
Earth-moving equipment
Lightweight towers
Radiator components
Safety-critical applications
Racking and shelving
Telescopic booms
Tow hooks
Train carriages

Relationship with standards

Tata Steel’s high-strength low-alloy steels comply with the following standards:

EN 10149-2: 2013	EN 10025-2: 2004	VDA	Tata Steel	Tata Steel	Germany SEW 092
Grade	Grade	Grade	Grade	Grade*	Grade
S315MC	-	HR300LA	Tenform XF315	Ympress S315MC	QStE340TM
S355MC	-	HR340LA	Tenform XF355	Ympress S355MC	QStE380TM
S420MC	-	HR420LA	Tenform XF420	Ympress S420MC	QStE460TM
S460MC	-	HR460LA	Tenform XF460	Ympress S460MC	QStE500TM
S500MC	-	HR500LA	Tenform XF500	Ympress S500MC	QStE550TM
S550MC*	-	-	-	Ympress S550MC	-
S650MC*	-	-	-	Ympress S650MC	-
-	-	-	-	Ympress E690TM	QStE690TM
S700MC*	-	HR700LA	-	Ympress S700MC	-
S960MC*	-	HR960LA	-	Ympress S960MC	-
-	S235J2C+N	-	-	-	-
-	S235J0C+N	-	-	-	-
-	S235JRC+AR	-	-	-	-

*For products produced in the Netherlands click here.

Supply - product conditions

Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:

Side/surface condition	non-pickled	pickled	pickled and oiled
Mill edges	Yes	Yes	Yes
Trimmed edges	-	Yes	Yes

Trimmed edges available in thicknesses up to 5.0 mm.
Please contact us regarding other specifications we may have that meet your needs.

Surface aspects

Description	Availability
Surface finish	Coils are available in non-pickled and pickled finish for most grades. For grade specific availability, please refer to the dimensional tables.
Oiling	Pickled finish is available with rolling or preservative oil applied. Oil weight normally 0.4-1.8 g/m²

Alternative oiling ranges are available.
Please contact us for details.

Certification

Test certificates 2.2/3.1 are available according to EN 10204.

EN-Product-Hot-rolled-All grades Surface aspects Supply Conditions TSUK

Supply Conditions

Supply - product conditions

Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:

Side/surface condition	non-pickled	pickled	pickled and oiled
Mill edges	Yes	Yes	Yes
Trimmed edges	-	Yes	Yes

Trimmed edges available in thicknesses up to 5.0 mm.
Please contact us regarding other specifications we may have that meet your needs.

Surface aspects

Description	Availability
Surface finish	Coils are available in non-pickled and pickled finish for most grades. For grade specific availability, please refer to the dimensional tables.
Oiling	Pickled finish is available with rolling or preservative oil applied. Oil weight normally 0.4-1.8 g/m²

Alternative oiling ranges are available.
Please contact us for details.

Certification

Test certificates 2.2/3.1 are available according to EN 10204.

EN-Product-Hot-Rolled-HSS-Tenform XF500-Properties TSUK

Properties

Mechanical Properties

Steel supplied will comply with the mechanical property limits below.
The values of the tensile test apply to test bars parallel to the rolling direction.
The values of the bend test apply to test bars transverse to the rolling direction.

Grade		Tenform XF500
Min. Yield strength R_eH¹	N/mm²	500
Tensile strength R_m	N/mm²	550-700
Min. elongation after fracture A%	t < 3	14
	3 ≤ t < 5	17
	t ≥ 5	14
Min. bend test diameter	t < 5	1 t
Min. bend test diameter	t ≥ 5	1 t

^1. Upper yield strength or 0.2% proof stress applies.
t – material thickness in mm.
Elongation test piece length L₀ = 80 mm for t < 3 mm. L₀ = 5.65√S₀ for t ≥ 3 mm.

Impact strength

Impact tests can be performed for thicknesses ≥ 6.0 mm. Please contact us for details.

Chemical composition

Steel supplied will comply with the chemical limits below.

Grade		Tenform XF500
C	Max.	0.1
Mn	Max.	1.5
P	Max.	0.025
S	Max.	0.01
Si	Max.	0.35
Micro-alloying elements (e.g. Nb)		0.3

All values are in weight%
This grade is not suitable for Class 1 galvanising

EN-Product-Hot-Rolled-HSS-Tenform XF500-Dimensions TSUK

Dimensions

Dimensional capability - non-pickled

Dimensions in mm.

Thickness	Max. width
From - up to	Tenform XF500
1.80 - 1.90	1100
1.90 - 2.00	1160
2.00 - 2.20	1250
2.20 - 2.50	1360
2.50 - 3.50	1410
3.50 - 5.00	1480
5.00 - 5.50	1550
6.00 - 9.00	1610

The minimum width is 900 mm. Other dimensions are available - please contact us.

Dimensional capability - pickled

Dimensions in mm.

Thickness	Max. width
From - up to	Tenform XF500
1.80 - 1.90	1100
1.90 - 2.00	1160
2.00 - 2.20	1250
2.20 - 2.50	1250
2.50 - 3.50	1360
3.50 - 4.00	1410
4.00 - 5.00	1480

The minimum width is 900 mm. Other dimensions are available - please contact us.
For trimmed dimensions reduce max. width by 23 mm.

Tolerances

Tolerances for wide strip and slit wide strip comply with standard EN 10051: 2010.
Tighter tolerances are available, please contact us.

EN-Product-Hot-rolled-All grades Shape and dimensional tolerances TSUK

Shape and dimensional tolerances

The specified values for wide strip do not apply to the uncropped ends of the coil (‘head’ and ‘tail’). The length of these uncropped ends is calculated using the following formula:

length (in metres) = 90/nominal thickness (in mm), with a maximum of 20 metres.

If required, this part of the coil can be removed, however an additional cost may be charged for this.

Tolerances on thickness

Tata Steel can supply to full thickness tolerance specified in EN 10051:2010.

Tighter tolerances are available as shown below:

Product family	Thickness tolerances available (% of full EN 10051:2010 tolerance)
	100%	75%	66%	50%
Steel for forming	Yes	Yes	Yes	(see note 1)
High-strength low-alloy (HSLA)	Yes	Yes	Yes	Yes
AHSS	Yes	Yes	Yes	Yes
Structural steel	Yes	Yes	Yes	Yes
Boron manganese steel	Yes	Yes	Yes
Steel for gas cylinders	Yes

¹ Please contact us for tolerances below 66%
Please contact us on the availability of special tolerances to meet your requirements.

Tolerances on thickness for hot-rolled steel with a low carbon content for cold forming
(DD11-DD14 in EN 10111:2008)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.13	± 0.14	± 0.16	-
> 2.00	≤ 2.50	± 0.14	± 0.16	± 0.17	± 0.19
> 2.50	≤ 3.00	± 0.15	± 0.17	± 0.18	± 0.20
> 3.00	≤ 4.00	± 0.17	± 0.18	± 0.20	± 0.20
> 4.00	≤ 5.00	± 0.18	± 0.20	± 0.21	± 0.22
> 5.00	≤ 6.00	± 0.20	± 0.21	± 0.22	± 0.23
> 6.00	≤ 8.00	± 0.22	± 0.23	± 0.23	± 0.26
> 8.00	≤ 11.00	± 0.24	± 0.25	± 0.25	± 0.28

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum yield strength
R_e ≤ 300 N/mm² (category A)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.17	± 0.19	± 0.21	-
> 2.00	≤ 2.50	± 0.18	± 0.21	± 0.23	± 0.25
> 2.50	≤ 3.00	± 0.20	± 0.22	± 0.24	± 0.26
> 3.00	≤ 4.00	± 0.22	± 0.24	± 0.26	± 0.27
> 4.00	≤ 5.00	± 0.24	± 0.26	± 0.28	± 0.29
> 5.00	≤ 6.00	± 0.26	± 0.28	± 0.29	± 0.31
> 6.00	≤ 8.00	± 0.29	± 0.30	± 0.31	± 0.35
> 8.00	≤ 10.00	± 0.32	± 0.33	± 0.34	± 0.40
> 10.00	≤ 12.50	± 0.35	± 0.36	± 0.37	± 0.43
> 12.50	≤ 15.00	± 0.37	± 0.38	± 0.40	± 0.46
> 15.00	≤ 25.00	± 0.40	± 0.42	± 0.45	± 0.50

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum yield strength
300 N/mm² < R_e ≤ 360 N/mm² (category B)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.20	± 0.22	± 0.24	-
> 2.00	≤ 2.50	± 0.21	± 0.24	± 0.26	± 0.29
> 2.50	≤ 3.00	± 0.23	± 0.25	± 0.28	± 0.30
> 3.00	≤ 4.00	± 0.25	± 0.28	± 0.30	± 0.31
> 4.00	≤ 5.00	± 0.28	± 0.30	± 0.32	± 0.33
> 5.00	≤ 6.00	± 0.30	± 0.32	± 0.33	± 0.36
> 6.00	≤ 8.00	± 0.33	± 0.35	± 0.36	± 0.40
> 8.00	≤ 10.00	± 0.37	± 0.38	± 0.39	± 0.46
> 10.00	≤ 12.50	± 0.40	± 0.41	± 0.43	± 0.49
> 12.50	≤ 15.00	± 0.43	± 0.44	± 0.46	± 0.53
> 15.00	≤ 25.00	± 0.46	± 0.48	± 0.52	± 0.58

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum yield strength
360 N/mm² < R_e ≤ 420 N/mm² (category C)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.22	± 0.25	± 0.27	-
> 2.00	≤ 2.50	± 0.23	± 0.27	± 0.30	± 0.33
> 2.50	≤ 3.00	± 0.26	± 0.29	± 0.31	± 0.34
> 3.00	≤ 4.00	± 0.29	± 0.31	± 0.34	± 0.35
> 4.00	≤ 5.00	± 0.31	± 0.34	± 0.36	± 0.38
> 5.00	≤ 6.00	± 0.34	± 0.36	± 0.38	± 0.40
> 6.00	≤ 8.00	± 0.38	± 0.39	± 0.40	± 0.46
> 8.00	≤ 10.00	± 0.42	± 0.43	± 0.44	± 0.52
> 10.00	≤ 12.50	± 0.46	± 0.47	± 0.48	± 0.56
> 12.50	≤ 15.00	± 0.48	± 0.49	± 0.52	± 0.60
> 15.00	≤ 25.00	± 0.52	± 0.55	± 0.59	± 0.65

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum yield strength
420 N/mm² < R_e ≤ 900 N/mm² (category D)

Nominal thickness		Tolerances for a nominal width of
		≤ 1200	> 1200	> 1500	> 1800
		≤ 1200	≤ 1500	≤ 1800	> 1800
	≤ 2.00	± 0.24	± 0.27	± 0.29	-
> 2.00	≤ 2.50	± 0.25	± 0.29	± 0.32	± 0.35
> 2.50	≤ 3.00	± 0.28	± 0.31	± 0.34	± 0.36
> 3.00	≤ 4.00	± 0.31	± 0.34	± 0.36	± 0.38
> 4.00	≤ 5.00	± 0.34	± 0.36	± 0.39	± 0.41
> 5.00	≤ 6.00	± 0.36	± 0.39	± 0.41	± 0.43
> 6.00	≤ 8.00	± 0.41	± 0.42	± 0.43	± 0.49
> 8.00	≤ 10.00	± 0.45	± 0.46	± 0.48	± 0.56
> 10.00	≤ 12.50	± 0.49	± 0.50	± 0.52	± 0.60
> 12.50	≤ 15.00	± 0.52	± 0.53	± 0.56	± 0.64
> 15.00	≤ 25.00	± 0.56	± 0.59	± 0.63	± 0.70

All dimensions are mm.

Tolerances on width

Tolerances in mm.

Nominal width w
	Mill edges		Trimmed edges
	lower	upper	lower	upper
w ≤ 1200	0	20	0	3
1200 < w ≤ 1850	0	20	0	5
w > 1850	0	25	0	6

Tolerances in mm for wide strip and slit wide strip
The tolerances for wide strip and slit wide strip comply with standard EN 10051:2010.

The specified values for wide strip do not apply to the uncropped ends of the coil (‘head’ and ‘tail’). The length of these uncropped ends is calculated using the following formula:
length (in metres) = 90/nominal thickness (in mm), with a maximum of 20 metres.

If required, this part of the coil can be removed, however an additional cost may be charged for this.

Edge camber

The deviation from the edge over a length of 5000mm:

• with mill edges, no more than 20mm
• with trimmed edges, no more than 15mm

Flatness

Requirements as regards flatness can be agreed at the time of enquiry.

Option for maximum crown values

The following high crown C40 options available for hot-rolled products.

Crown values on the C20-position as well as minimum crown values on both C20 and C40 position are also available on request.

Maximum Crown C40 in µm values for hot-rolled steel with a low carbon content for cold forming
(DD11-DD14 in EN 10111:2008)

Category 1		C40
Nominal Thickness		≤ 1200	> 1200	> 1500	> 1800
Nominal Thickness		≤ 1200	≤ 1500	≤ 1800	> 1800
> 1.47	≤ 2.00	40	40	40	40
> 2.00	≤ 2.50	40	40	50	50
> 2.50	≤ 3.00	40	40	50	50
> 3.00	≤ 6.00	40	50	50	50
> 6.00	≤ 11.00	50	50	50	50

Maximum Crown C40 in µm values of structural steel grades
(S185-S235-S275 ≤ 10mm in EN 10025-2:2004)

Category 2		C40
Nominal Thickness		≤ 1200	> 1200	> 1500	> 1800
Nominal Thickness		≤ 1200	≤ 1500	≤ 1800	> 1800
> 1.47	≤ 2.00	40	40	40	40
> 2.00	≤ 2.50	40	40	50	50
> 2.50	≤ 20.00	50	50	50	50

Maximum Crown C40 in µm values of structural steel grades(S275 > 10mm in EN 10025-2:2004)
and HSLA grades (S315MC in EN 10149-2:1996)

Category 3		C40
Nominal Thickness		≤ 1200	> 1200	> 1500	> 1800
Nominal Thickness		≤ 1200	≤ 1500	≤ 1800	> 1800
> 1.47	≤ 2.00	50	50	60	60
> 2.00	≤ 2.50	50	60	60	60
> 2.50	≤ 3.00	50	60	60	60
> 3.00	≤ 20.00	60	60	70	70

Maximum Crown C40 in µm values of HSLA grades
(S355MC, S420MC, S460MC, S500MC, S550MC in EN 10149-2:1996)

Category 4		C40
Nominal Thickness		≤ 1200	> 1200	> 1500	> 1800
Nominal Thickness		≤ 1200	≤ 1500	≤ 1800	> 1800
> 1.47	≤ 2.00	60	70	70	70
> 2.00	≤ 2.50	60	70	80	80
> 2.50	≤ 3.00	60	70	80	80
> 3.00	≤ 5.00	70	70	80	80
> 5.00	≤ 20.00	80	80	80	80

Dimensions and coil weights

Tata Steel can supply hot-rolled steels with the following minimum and maximum dimensions and weights:

Description	Availability
Coil diameter inner non-pickled	762mm
Coil diameter inner pickled	610mm standard
Tolerance on inner diameter	+0/-50mm
Coil diameter outer non-pickled	Outer diameter available is 10/7 x width
	to reduce possibility of coil tipping over
	Max. 2200mm
	Min. 1050mm
Coil diameter outer pickled and oiled	Outer diameter available is 10/7 x width
	to reduce possibility of coil tipping over
	Outer diameter
	limit 2200mm
	Min. 1050mm
Coil weight	Max. 32 tonnes
	Additional maximum limits from transport
	limits and outer coil diameter
	Some HR products may have different
	coil weight ranges
Minimum tonnage per order	Please refer to price list for order quantity details
Minimum tonnage per order	Minimum order quantities may apply

EN-Product-Hot-rolled-Heavy+Light further processing TSUK

Further processing

We have a broad network of Tata Steel service centres across Europe, offering decoiling and slitting services from stock and against short lead times.

Heavy gauge processing

Processing type	Decoiling
Thickness range (mm)	1.4 - 25.4
Width range (mm)	300 - 2600
Length range	up to 18.4m
Locations	UK Netherlands

Light gauge processing

Processing type	Slitting	Decoiling	Blanking
Thickness range (mm)	0.2 - 7.0	0.3 - 6.0	0.3 - 6.0
Width range (mm)	10 - 2050	50 - 2600	200 - 2600
Length range	-	up to 6m	up to 6m
Locations	UK Ireland Netherlands Germany France Spain Sweden Norway Finland	UK Ireland Netherlands Germany France Spain Sweden Norway Finland	UK Ireland

High-strength steel

Tata Steel’s hot-rolled high-strength, low-alloy (HSLA) grades offer formability and strength for demanding applications.

Applications

Relationship with standards

Supply - product conditions

Surface aspects

Certification

Supply - product conditions

Surface aspects

Certification

Mechanical Properties

1. Upper yield strength or 0.2% proof stress applies. Elongation after fracture A uses test piece length L0 = 80 mm for t < 3 mm. L0 = 5.65√S0 for t ≥ 3 mm. t – material thickness in mm

Impact strength

Chemical composition

1. The sum of Nb, V and Ti shall be max. 0.22%. All values are in weight%

Dimensional capability - non-pickled

The minimum width is 900 mm.For products produced in the Netherlands click here.

Dimensional capability - pickled

The minimum width is 900 mm.For products produced in the Netherlands click here.

Tolerances

Shape and dimensional tolerances

Tolerances on thickness

1 Please contact us for tolerances below 66%Please contact us on the availability of special tolerances to meet your requirements.

Tolerances on thickness for hot-rolled steel with a low carbon content for cold forming(DD11-DD14 in EN 10111:2008)

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum yield strengthRe ≤ 300 N/mm2 (category A)

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum yield strength300 N/mm2 < Re ≤ 360 N/mm2 (category B)

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum yield strength360 N/mm2 < Re ≤ 420 N/mm2 (category C)

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum yield strength420 N/mm2 < Re ≤ 900 N/mm2 (category D)

All dimensions are mm.

Tolerances on width

Edge camber

Flatness

Option for maximum crown values

Maximum Crown C40 in µm values for hot-rolled steel with a low carbon content for cold forming(DD11-DD14 in EN 10111:2008)

Maximum Crown C40 in µm values of structural steel grades(S185-S235-S275 ≤ 10mm in EN 10025-2:2004)

Maximum Crown C40 in µm values of structural steel grades(S275 > 10mm in EN 10025-2:2004) and HSLA grades (S315MC in EN 10149-2:1996)

Maximum Crown C40 in µm values of HSLA grades (S355MC, S420MC, S460MC, S500MC, S550MC in EN 10149-2:1996)

Dimensions and coil weights

Further processing

Heavy gauge processing

Light gauge processing

For further information please visit our Service Centre webpages.

Applications

Relationship with standards

Supply - product conditions

Surface aspects

Certification

Supply - product conditions

Surface aspects

Certification

Mechanical Properties

1. Upper yield strength or 0.2% proof stress applies. t – material thickness in mm. Elongation test piece length L0 = 80 mm for t < 3 mm. L0 = 5.65√S0 for t ≥ 3 mm.

Impact strength

Chemical composition

1. The sum of Nb, V and Ti shall be max. 0.22%. All values are in weight%

Dimensional capability - non-pickled

The minimum width is 900 mm.Other dimensions may be available - please contact us.For products produced in the Netherlands click here.

Dimensional capability - pickled

The minimum width is 900 mm.Other dimensions may be available - please contact us.For products produced in the Netherlands click here.

Tolerances

Shape and dimensional tolerances

Tolerances on thickness

1 Please contact us for tolerances below 66%Please contact us on the availability of special tolerances to meet your requirements.

Tolerances on thickness for hot-rolled steel with a low carbon content for cold forming(DD11-DD14 in EN 10111:2008)

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum yield strengthRe ≤ 300 N/mm2 (category A)

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum yield strength300 N/mm2 < Re ≤ 360 N/mm2 (category B)

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum yield strength360 N/mm2 < Re ≤ 420 N/mm2 (category C)

All dimensions are mm.

Tolerances on thickness of steel grades with a specified minimum yield strength420 N/mm2 < Re ≤ 900 N/mm2 (category D)

All dimensions are mm.

Tolerances on width

Edge camber

Flatness

^1. Upper yield strength or 0.2% proof stress applies.
Elongation after fracture A uses test piece length L₀ = 80 mm for t < 3 mm. L₀ = 5.65√S₀ for t ≥ 3 mm.
t – material thickness in mm

^1. The sum of Nb, V and Ti shall be max. 0.22%.
All values are in weight%

The minimum width is 900 mm.
For products produced in the Netherlands click here.

The minimum width is 900 mm.
For products produced in the Netherlands click here.

¹ Please contact us for tolerances below 66%
Please contact us on the availability of special tolerances to meet your requirements.

Tolerances on thickness for hot-rolled steel with a low carbon content for cold forming
(DD11-DD14 in EN 10111:2008)

Tolerances on thickness of steel grades with a specified minimum yield strength
R_e ≤ 300 N/mm² (category A)

Tolerances on thickness of steel grades with a specified minimum yield strength
300 N/mm² < R_e ≤ 360 N/mm² (category B)

Tolerances on thickness of steel grades with a specified minimum yield strength
360 N/mm² < R_e ≤ 420 N/mm² (category C)

Tolerances on thickness of steel grades with a specified minimum yield strength
420 N/mm² < R_e ≤ 900 N/mm² (category D)

Maximum Crown C40 in µm values for hot-rolled steel with a low carbon content for cold forming
(DD11-DD14 in EN 10111:2008)

Maximum Crown C40 in µm values of structural steel grades
(S185-S235-S275 ≤ 10mm in EN 10025-2:2004)

Maximum Crown C40 in µm values of structural steel grades(S275 > 10mm in EN 10025-2:2004)
and HSLA grades (S315MC in EN 10149-2:1996)

Maximum Crown C40 in µm values of HSLA grades
(S355MC, S420MC, S460MC, S500MC, S550MC in EN 10149-2:1996)

^1. Upper yield strength or 0.2% proof stress applies.
t – material thickness in mm.
Elongation test piece length L₀ = 80 mm for t < 3 mm. L₀ = 5.65√S₀ for t ≥ 3 mm.

^1. The sum of Nb, V and Ti shall be max. 0.22%.
All values are in weight%

The minimum width is 900 mm.
Other dimensions may be available - please contact us.
For products produced in the Netherlands click here.

The minimum width is 900 mm.
Other dimensions may be available - please contact us.
For products produced in the Netherlands click here.

¹ Please contact us for tolerances below 66%
Please contact us on the availability of special tolerances to meet your requirements.

Tolerances on thickness for hot-rolled steel with a low carbon content for cold forming
(DD11-DD14 in EN 10111:2008)

Tolerances on thickness of steel grades with a specified minimum yield strength
R_e ≤ 300 N/mm² (category A)

Tolerances on thickness of steel grades with a specified minimum yield strength
300 N/mm² < R_e ≤ 360 N/mm² (category B)

Tolerances on thickness of steel grades with a specified minimum yield strength
360 N/mm² < R_e ≤ 420 N/mm² (category C)

Tolerances on thickness of steel grades with a specified minimum yield strength
420 N/mm² < R_e ≤ 900 N/mm² (category D)

Maximum Crown C40 in µm values for hot-rolled steel with a low carbon content for cold forming
(DD11-DD14 in EN 10111:2008)

Maximum Crown C40 in µm values of structural steel grades
(S185-S235-S275 ≤ 10mm in EN 10025-2:2004)

Maximum Crown C40 in µm values of structural steel grades(S275 > 10mm in EN 10025-2:2004)
and HSLA grades (S315MC in EN 10149-2:1996)

Maximum Crown C40 in µm values of HSLA grades
(S355MC, S420MC, S460MC, S500MC, S550MC in EN 10149-2:1996)

^1. Upper yield strength or 0.2% proof stress applies.
t – material thickness in mm.
Elongation after fracture A uses test piece length L₀ = 80 mm for t < 3 mm. L₀ = 5.65√S₀ for t ≥ 3 mm.

^1. The sum of Nb, V and Ti shall be max. 0.22%.
All values are in weight%

The minimum width is 900 mm.
For products produced in the Netherlands click here.

The minimum width is 900 mm.
For products produced in the Netherlands click here.

¹ Please contact us for tolerances below 66%
Please contact us on the availability of special tolerances to meet your requirements.

Tolerances on thickness for hot-rolled steel with a low carbon content for cold forming
(DD11-DD14 in EN 10111:2008)

Tolerances on thickness of steel grades with a specified minimum yield strength
R_e ≤ 300 N/mm² (category A)

Tolerances on thickness of steel grades with a specified minimum yield strength
300 N/mm² < R_e ≤ 360 N/mm² (category B)

Tolerances on thickness of steel grades with a specified minimum yield strength
360 N/mm² < R_e ≤ 420 N/mm² (category C)

Tolerances on thickness of steel grades with a specified minimum yield strength
420 N/mm² < R_e ≤ 900 N/mm² (category D)