• Recognised for its robustness and reliability.

• Our principal ‘gaslist’ tube for UK market applications. 
• Manufactured in accordance with a range of standards, including EN10255 and EN10217-2 to satisfy both Construction Products Regulation (CPR) and the Pressure Equipment Directive (PED) requirements, where applicable.
• The perfect replacement for BS1387, which is now a withdrawn and unsupported standard.
• Install Plus uses a higher 235MPa grade of steel (compared to lower 195 grade as per BS1387) delivering improved pressure integrity.
• CE / UKCA marked to CPR CAT 3 (gas/fuel) and CPR CAT 4 (water) for added confidence and application suitability.
• Suitable for pressure applications and temperature range -20 to +300ºC.
• Available in a wide range of sizes and weights.
• We are able to offer exact lengths for bulk orders.
• Available in a range of ends (plain, grooved or screwed and socketed) and surface finishes (red-painted or galvanised).
• Other special surface colours and finishes, including external epoxy and polymer coatings may also be available, please contact us to discuss your requirements. (Note: certain size restrictions or minimum order quantities may apply)
• Our pre-grooved tube offers project savings as well as other installation benefits.
• Install Plus is fully technically supported with a wide range of available product datasheets.

If you have any questions or for further information click here to contact us.

Summary of chemical composition (ladle analysis) and mechanical properties

If you have any questions or for further information click here to contact us.

Install® Plus tube data

For larger Install® Plus XL EN10255 sizes, please refer to our Inline® product literature for full details.

If you have any questions or for further information click here to contact us.

<p><img alt="" height="345" src="/sites/default/files/Tata%20Steel/content/products/Pipework%20Systems/Install%20and%20Install%20Plus/Images/Pressure%20ratings.jpg" width="1000"/></p>

Downloads

We offer a range of face to face and online CPDs aimed at Engineers and Architects

These free seminars can be booked at any time between 9am and 5pm. Our online webinars can all be delivered via Skype for Business and Teams, but we can consider other platforms if this will not work for your practice.

Below outline the CPDs we have available - Book yours today

• Decarbonising your structural hollow section designs
• Essentials of Structural Hollow Sections
• Welded Joints in Tubular Steelwork - Eurocode 3 Part 1-8
• Concrete Filled Hollow Sections - Composite Design – Eurocode 4
• Composite Floor Deck in Construction
• Structural Roof Deck in Construction
• Specifying metal clad envelope systems in accordance with ADB2 of the building regulations and the value of large scale system testing
• RIBA 2030 climate challenge: How steel building envelope solutions contribute
• Pre-finished steel standing seam systems for roof & wall cladding
• CDM regulations 2015 and their impact on steel building envelope specification.
• Steel building envelope systems for non-domestic buildings
• Steel for roof and wall cladding

Book your CPD today

• Robust and reliable building and engineering services solution

• Our principal ‘gaslist’ tube for Mainland European (MLE) market applications.
• Single certified product, manufactured in accordance to EN10255.
• CE / UKCA marked to CPD CAT 3 (gas/fuel) and CPD CAT 4 (water) for added confidence and application suitability.
• 195 steel grade.
• Manufactured in the UK.
• Hot-finished process route, delivering consistent performance, mechanical properties and improved ductility, compared to competitor cold-formed options that may suffer from internal stresses and increased risk of failure during manipulation.
• Suitable for pressure applications and temperature range -7 to +260ºC.
• Available in a wide range of sizes, weights and wall thickness.
• Available in a range of end (plain, grooved or screwed and socketed) and surface finishes (painted, polymer, epoxy or galvanised). (Note: certain size restrictions or minimum order quantities may apply.)
• Backed up by technical experts who can offer advice on applications and product suitability.
• Install® is fully technically supported with a range of available product brochures.
• Certified to BES 6001 Responsible Sourcing standard.

If you have any questions or for further information click here to contact us.

Chemical composition (cast analysis) and mechanical properties

Install® EN 10255 dimensional data

<p><img alt="" height="431" src="/sites/default/files/Tata%20Steel/content/products/Pipework%20Systems/Install%20and%20Install%20Plus/Install/Images/Pressure%20ratings.jpg" width="1000"/></p>

<p></p>

We offer a range of face to face and online CPDs aimed at Engineers and Architects

These free seminars can be booked at any time between 9am and 5pm. Our online webinars can all be delivered via Skype for Business and Teams, but we can consider other platforms if this will not work for your practice.

Below outline the CPDs we have available - Book yours today

• Decarbonising your structural hollow section designs
• Essentials of Structural Hollow Sections
• Welded Joints in Tubular Steelwork - Eurocode 3 Part 1-8
• Concrete Filled Hollow Sections - Composite Design – Eurocode 4
• Composite Floor Deck in Construction
• Structural Roof Deck in Construction
• Specifying metal clad envelope systems in accordance with ADB2 of the building regulations and the value of large scale system testing
• RIBA 2030 climate challenge: How steel building envelope solutions contribute
• Pre-finished steel standing seam systems for roof & wall cladding
• CDM regulations 2015 and their impact on steel building envelope specification.
• Steel building envelope systems for non-domestic buildings
• Steel for roof and wall cladding

Book your CPD today