Steel for gas cylinders
Tata Steel’s structural steel for gas cylinders offers excellent deep-drawing properties and weldability for ease of processing.
The grades allow for reliable normalising of the welded gas cylinder - retaining strength that contributes to optimal safety in use.
EN-Product-Hot-Rolled-Gas cylinders-P245NB TSUK
EN-Product-Hot-Rolled-Gas cylinders-All grades Overview TSUK
Relationship with standards
Steel for gas cylinders complies with the following European standard:
EN 10120: 2008 |
|---|
Grade |
| P245NB |
| P265NB |
For products produced in the Netherlands click here.
Supply - product conditions
Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:
| Side/surface condition | non-pickled | pickled | pickled and oiled |
|---|---|---|---|
| Mill edges | Yes | Yes | Yes |
| Trimmed edges | - | Yes | Yes |
Trimmed edges available in thicknesses up to 5.0 mm.
Please contact us regarding other specifications we may have that meet your needs.
Surface aspects
| Description | Availability |
|---|---|
| Surface finish | Coils are available in non-pickled and pickled finish for most grades. For grade specific availability, please refer to the dimensional tables. |
| Oiling | Pickled finish is available with rolling or preservative oil applied. Oil weight normally 0.4-1.8 g/m2 |
Alternative oiling ranges are available.
Please contact us for details.
Certification
Test certificates 2.2/3.1 are available according to EN 10204.
EN-Product-Hot-rolled-All grades Surface aspects Supply Conditions TSUK
Supply - product conditions
Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:
| Side/surface condition | non-pickled | pickled | pickled and oiled |
|---|---|---|---|
| Mill edges | Yes | Yes | Yes |
| Trimmed edges | - | Yes | Yes |
Trimmed edges available in thicknesses up to 5.0 mm.
Please contact us regarding other specifications we may have that meet your needs.
Surface aspects
| Description | Availability |
|---|---|
| Surface finish | Coils are available in non-pickled and pickled finish for most grades. For grade specific availability, please refer to the dimensional tables. |
| Oiling | Pickled finish is available with rolling or preservative oil applied. Oil weight normally 0.4-1.8 g/m2 |
Alternative oiling ranges are available.
Please contact us for details.
Certification
Test certificates 2.2/3.1 are available according to EN 10204.
EN-Product-Hot-Rolled-Gas cylinders-P245NB-Properties TSUK
Mechanical Properties
Steel for gas cylinders has the following mechanical properties, measured transverse to the rolling direction:
| EN 10120: 2017 | Grade | P245NB |
|---|---|---|
| Min. yield strength1 ReH (N/mm²) | 245 | |
| Tensile strength Rm (N/mm²) | 360 - 450 | |
| Elongation % | t < 3 | 26 |
| t ≥ 3 | 34 |
1. Upper yield strength or 0.2% proof stress applies.
Elongation after fracture A uses test piece length L0 = 80 mm for t < 3 and L0 = 5.65√S0 for t ≥ 3.
t – material thickness in mm.
Chemical composition
Tata Steel will satisfy the following cast analysis with values:
| EN 10120: 2008 | Grade | P245NB |
|---|---|---|
| C | Max. | 0.16 |
| Mn | Min. | 0.30 |
| P | Max. | 0.025 |
| S | Max. | 0.015 |
| Si | Max. | 0.25 |
| Altot | Min. | 0.020 |
| N | Max. | 0.009 |
| Nb | Max. | 0.050 |
| Ti | Max. | 0.030 |
All values are in weight%.
Tata Steel does not use Cr, Cu, Mo or Ni as alloying elements for these steel grades.
EN-Product-Hot-Rolled-Gas cylinders-P245NB-Dimensions TSUK
Dimensional capability
Dimensions in mm.
| Thickness | Max. width |
|---|---|
| From - up to | P245NB |
| 2.00 - 2.60 | 1530 |
| 2.60 - 5.00 | 1530 |
The above capabilities apply to both pickled and non-pickled conditions.
The minimum width is 1000 mm.
Widths smaller than 1000 mm are available on request - please contact us.
For products produced in the Netherlands click here.
Tolerances
Tolerances for wide strip and slit wide strip comply with standard EN 10051: 2010.
Tighter tolerances are available, please contact us.
EN-Product-Hot-rolled-All grades Shape and dimensional tolerances TSUK
Shape and dimensional tolerances
The specified values for wide strip do not apply to the uncropped ends of the coil (‘head’ and ‘tail’). The length of these uncropped ends is calculated using the following formula:
length (in metres) = 90/nominal thickness (in mm), with a maximum of 20 metres.
If required, this part of the coil can be removed, however an additional cost may be charged for this.
Tolerances on thickness
Tata Steel can supply to full thickness tolerance specified in EN 10051:2010.
Tighter tolerances are available as shown below:
| Product family | Thickness tolerances available (% of full EN 10051:2010 tolerance) |
|||
|---|---|---|---|---|
| 100% | 75% | 66% | 50% | |
| Steel for forming | Yes | Yes | Yes | (see note 1) |
| High-strength low-alloy (HSLA) | Yes | Yes | Yes | Yes |
| AHSS | Yes | Yes | Yes | Yes |
| Structural steel | Yes | Yes | Yes | Yes |
| Boron manganese steel | Yes | Yes | Yes | |
| Steel for gas cylinders | Yes | |||
1 Please contact us for tolerances below 66%
Please contact us on the availability of special tolerances to meet your requirements.
Tolerances on thickness for hot-rolled steel with a low carbon content for cold forming
(DD11-DD14 in EN 10111:2008)
| Nominal thickness | Tolerances for a nominal width of | ||||
|---|---|---|---|---|---|
| ≤ 1200 | > 1200 | > 1500 | > 1800 | ||
| ≤ 1500 | ≤ 1800 | ||||
|
|
≤ 2.00 |
± 0.13 |
± 0.14 |
± 0.16 |
- |
|
> 2.00 |
≤ 2.50 |
± 0.14 |
± 0.16 |
± 0.17 |
± 0.19 |
|
> 2.50 |
≤ 3.00 |
± 0.15 |
± 0.17 |
± 0.18 |
± 0.20 |
|
> 3.00 |
≤ 4.00 |
± 0.17 |
± 0.18 |
± 0.20 |
± 0.20 |
|
> 4.00 |
≤ 5.00 |
± 0.18 |
± 0.20 |
± 0.21 |
± 0.22 |
|
> 5.00 |
≤ 6.00 |
± 0.20 |
± 0.21 |
± 0.22 |
± 0.23 |
|
> 6.00 |
≤ 8.00 |
± 0.22 |
± 0.23 |
± 0.23 |
± 0.26 |
|
> 8.00 |
≤ 11.00 |
± 0.24 |
± 0.25 |
± 0.25 |
± 0.28 |
All dimensions are mm.
Tolerances on thickness of steel grades with a specified minimum yield strength
Re ≤ 300 N/mm2 (category A)
| Nominal thickness | Tolerances for a nominal width of | ||||
|---|---|---|---|---|---|
| ≤ 1200 | > 1200 | > 1500 | > 1800 | ||
| ≤ 1500 | ≤ 1800 | ||||
|
≤ 2.00 |
± 0.17 |
± 0.19 |
± 0.21 |
- |
|
|
> 2.00 |
≤ 2.50 |
± 0.18 |
± 0.21 |
± 0.23 |
± 0.25 |
|
> 2.50 |
≤ 3.00 |
± 0.20 |
± 0.22 |
± 0.24 |
± 0.26 |
|
> 3.00 |
≤ 4.00 |
± 0.22 |
± 0.24 |
± 0.26 |
± 0.27 |
|
> 4.00 |
≤ 5.00 |
± 0.24 |
± 0.26 |
± 0.28 |
± 0.29 |
|
> 5.00 |
≤ 6.00 |
± 0.26 |
± 0.28 |
± 0.29 |
± 0.31 |
|
> 6.00 |
≤ 8.00 |
± 0.29 |
± 0.30 |
± 0.31 |
± 0.35 |
|
> 8.00 |
≤ 10.00 |
± 0.32 |
± 0.33 |
± 0.34 |
± 0.40 |
|
> 10.00 |
≤ 12.50 |
± 0.35 |
± 0.36 |
± 0.37 |
± 0.43 |
|
> 12.50 |
≤ 15.00 |
± 0.37 |
± 0.38 |
± 0.40 |
± 0.46 |
|
> 15.00 |
≤ 25.00 |
± 0.40 |
± 0.42 |
± 0.45 |
± 0.50 |
All dimensions are mm.
Tolerances on thickness of steel grades with a specified minimum yield strength
300 N/mm2 < Re ≤ 360 N/mm2 (category B)
| Nominal thickness | Tolerances for a nominal width of | ||||
|---|---|---|---|---|---|
| ≤ 1200 | > 1200 | > 1500 | > 1800 | ||
| ≤ 1500 | ≤ 1800 | ||||
|
|
≤ 2.00 |
± 0.20 |
± 0.22 |
± 0.24 |
- |
|
> 2.00 |
≤ 2.50 |
± 0.21 |
± 0.24 |
± 0.26 |
± 0.29 |
|
> 2.50 |
≤ 3.00 |
± 0.23 |
± 0.25 |
± 0.28 |
± 0.30 |
|
> 3.00 |
≤ 4.00 |
± 0.25 |
± 0.28 |
± 0.30 |
± 0.31 |
|
> 4.00 |
≤ 5.00 |
± 0.28 |
± 0.30 |
± 0.32 |
± 0.33 |
|
> 5.00 |
≤ 6.00 |
± 0.30 |
± 0.32 |
± 0.33 |
± 0.36 |
|
> 6.00 |
≤ 8.00 |
± 0.33 |
± 0.35 |
± 0.36 |
± 0.40 |
|
> 8.00 |
≤ 10.00 |
± 0.37 |
± 0.38 |
± 0.39 |
± 0.46 |
|
> 10.00 |
≤ 12.50 |
± 0.40 |
± 0.41 |
± 0.43 |
± 0.49 |
|
> 12.50 |
≤ 15.00 |
± 0.43 |
± 0.44 |
± 0.46 |
± 0.53 |
|
> 15.00 |
≤ 25.00 |
± 0.46 |
± 0.48 |
± 0.52 |
± 0.58 |
All dimensions are mm.
Tolerances on thickness of steel grades with a specified minimum yield strength
360 N/mm2 < Re ≤ 420 N/mm2 (category C)
| Nominal thickness |
Tolerances for a nominal width of |
||||
|---|---|---|---|---|---|
| ≤ 1200 | > 1200 | > 1500 | > 1800 | ||
| ≤ 1500 | ≤ 1800 | ||||
|
|
≤ 2.00 |
± 0.22 |
± 0.25 |
± 0.27 |
- |
|
> 2.00 |
≤ 2.50 |
± 0.23 |
± 0.27 |
± 0.30 |
± 0.33 |
|
> 2.50 |
≤ 3.00 |
± 0.26 |
± 0.29 |
± 0.31 |
± 0.34 |
|
> 3.00 |
≤ 4.00 |
± 0.29 |
± 0.31 |
± 0.34 |
± 0.35 |
|
> 4.00 |
≤ 5.00 |
± 0.31 |
± 0.34 |
± 0.36 |
± 0.38 |
|
> 5.00 |
≤ 6.00 |
± 0.34 |
± 0.36 |
± 0.38 |
± 0.40 |
|
> 6.00 |
≤ 8.00 |
± 0.38 |
± 0.39 |
± 0.40 |
± 0.46 |
|
> 8.00 |
≤ 10.00 |
± 0.42 |
± 0.43 |
± 0.44 |
± 0.52 |
|
> 10.00 |
≤ 12.50 |
± 0.46 |
± 0.47 |
± 0.48 |
± 0.56 |
|
> 12.50 |
≤ 15.00 |
± 0.48 |
± 0.49 |
± 0.52 |
± 0.60 |
|
> 15.00 |
≤ 25.00 |
± 0.52 |
± 0.55 |
± 0.59 |
± 0.65 |
All dimensions are mm.
Tolerances on thickness of steel grades with a specified minimum yield strength
420 N/mm2 < Re ≤ 900 N/mm2 (category D)
|
Nominal thickness |
Tolerances for a nominal width of | ||||
|---|---|---|---|---|---|
| ≤ 1200 | > 1200 | > 1500 | > 1800 | ||
| ≤ 1500 | ≤ 1800 | ||||
|
|
≤ 2.00 |
± 0.24 |
± 0.27 |
± 0.29 |
- |
|
> 2.00 |
≤ 2.50 |
± 0.25 |
± 0.29 |
± 0.32 |
± 0.35 |
|
> 2.50 |
≤ 3.00 |
± 0.28 |
± 0.31 |
± 0.34 |
± 0.36 |
|
> 3.00 |
≤ 4.00 |
± 0.31 |
± 0.34 |
± 0.36 |
± 0.38 |
|
> 4.00 |
≤ 5.00 |
± 0.34 |
± 0.36 |
± 0.39 |
± 0.41 |
|
> 5.00 |
≤ 6.00 |
± 0.36 |
± 0.39 |
± 0.41 |
± 0.43 |
|
> 6.00 |
≤ 8.00 |
± 0.41 |
± 0.42 |
± 0.43 |
± 0.49 |
|
> 8.00 |
≤ 10.00 |
± 0.45 |
± 0.46 |
± 0.48 |
± 0.56 |
|
> 10.00 |
≤ 12.50 |
± 0.49 |
± 0.50 |
± 0.52 |
± 0.60 |
|
> 12.50 |
≤ 15.00 |
± 0.52 |
± 0.53 |
± 0.56 |
± 0.64 |
|
> 15.00 |
≤ 25.00 |
± 0.56 |
± 0.59 |
± 0.63 |
± 0.70 |
All dimensions are mm.
Tolerances on width
Tolerances in mm.
| Nominal width w | ||||
|---|---|---|---|---|
| Mill edges | Trimmed edges | |||
| lower | upper | lower | upper | |
|
w ≤ 1200 |
0 |
20 |
0 |
3 |
|
1200 < w ≤ 1850 |
0 |
20 |
0 |
5 |
|
w > 1850 |
0 |
25 |
0 |
6 |
Tolerances in mm for wide strip and slit wide strip
The tolerances for wide strip and slit wide strip comply with standard EN 10051:2010.
The specified values for wide strip do not apply to the uncropped ends of the coil (‘head’ and ‘tail’). The length of these uncropped ends is calculated using the following formula:
length (in metres) = 90/nominal thickness (in mm), with a maximum of 20 metres.
If required, this part of the coil can be removed, however an additional cost may be charged for this.
Edge camber
The deviation from the edge over a length of 5000mm:
• with mill edges, no more than 20mm
• with trimmed edges, no more than 15mm
Flatness
Requirements as regards flatness can be agreed at the time of enquiry.
Option for maximum crown values
The following high crown C40 options available for hot-rolled products.
Crown values on the C20-position as well as minimum crown values on both C20 and C40 position are also available on request.
Maximum Crown C40 in µm values for hot-rolled steel with a low carbon content for cold forming
(DD11-DD14 in EN 10111:2008)
|
Category 1 |
C40 |
||||
|---|---|---|---|---|---|
| Nominal Thickness |
≤ 1200 |
> 1200 |
> 1500 |
> 1800 |
|
|
≤ 1500 |
≤ 1800 |
||||
|
> 1.47 |
≤ 2.00 |
40 |
40 |
40 |
40 |
|
> 2.00 |
≤ 2.50 |
40 |
40 |
50 |
50 |
|
> 2.50 |
≤ 3.00 |
40 |
40 |
50 |
50 |
|
> 3.00 |
≤ 6.00 |
40 |
50 |
50 |
50 |
|
> 6.00 |
≤ 11.00 |
50 |
50 |
50 |
50 |
Maximum Crown C40 in µm values of structural steel grades
(S185-S235-S275 ≤ 10mm in EN 10025-2:2004)
|
Category 2 |
C40 |
||||
|---|---|---|---|---|---|
| Nominal Thickness |
≤ 1200 |
> 1200 |
> 1500 |
> 1800 |
|
|
≤ 1500 |
≤ 1800 |
||||
|
> 1.47 |
≤ 2.00 |
40 |
40 |
40 |
40 |
|
> 2.00 |
≤ 2.50 |
40 |
40 |
50 |
50 |
|
> 2.50 |
≤ 20.00 |
50 |
50 |
50 |
50 |
Maximum Crown C40 in µm values of structural steel grades(S275 > 10mm in EN 10025-2:2004)
and HSLA grades (S315MC in EN 10149-2:1996)
|
Category 3 |
C40 |
||||
|---|---|---|---|---|---|
| Nominal Thickness |
≤ 1200 |
> 1200 |
> 1500 |
> 1800 |
|
|
≤ 1500 |
≤ 1800 |
||||
|
> 1.47 |
≤ 2.00 |
50 |
50 |
60 |
60 |
|
> 2.00 |
≤ 2.50 |
50 |
60 |
60 |
60 |
|
> 2.50 |
≤ 3.00 |
50 |
60 |
60 |
60 |
|
> 3.00 |
≤ 20.00 |
60 |
60 |
70 |
70 |
Maximum Crown C40 in µm values of HSLA grades
(S355MC, S420MC, S460MC, S500MC, S550MC in EN 10149-2:1996)
|
Category 4 |
C40 |
||||
|---|---|---|---|---|---|
| Nominal Thickness |
≤ 1200 |
> 1200 |
> 1500 |
> 1800 |
|
|
≤ 1500 |
≤ 1800 |
||||
|
> 1.47 |
≤ 2.00 |
60 |
70 |
70 |
70 |
|
> 2.00 |
≤ 2.50 |
60 |
70 |
80 |
80 |
|
> 2.50 |
≤ 3.00 |
60 |
70 |
80 |
80 |
|
> 3.00 |
≤ 5.00 |
70 |
70 |
80 |
80 |
|
> 5.00 |
≤ 20.00 |
80 |
80 |
80 |
80 |
Dimensions and coil weights
Tata Steel can supply hot-rolled steels with the following minimum and maximum dimensions and weights:
| Description | Availability |
|---|---|
| Coil diameter inner non-pickled | 762mm |
| Coil diameter inner pickled | 610mm standard |
| Tolerance on inner diameter | +0/-50mm |
| Coil diameter outer non-pickled | Outer diameter available is 10/7 x width |
| to reduce possibility of coil tipping over | |
| Max. 2200mm | |
| Min. 1050mm | |
| Coil diameter outer pickled and oiled | Outer diameter available is 10/7 x width |
| to reduce possibility of coil tipping over | |
| Outer diameter | |
| limit 2200mm | |
| Min. 1050mm | |
| Coil weight | Max. 32 tonnes |
| Additional maximum limits from transport | |
| limits and outer coil diameter | |
| Some HR products may have different | |
| coil weight ranges | |
| Minimum tonnage per order | Please refer to price list for order quantity details |
| Minimum order quantities may apply |
EN-Product-Hot-Rolled-Gas cylinders-P265N TSUK
EN-Product-Hot-Rolled-Gas cylinders-All grades Overview TSUK
Relationship with standards
Steel for gas cylinders complies with the following European standard:
EN 10120: 2008 |
|---|
Grade |
| P245NB |
| P265NB |
For products produced in the Netherlands click here.
Supply - product conditions
Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:
| Side/surface condition | non-pickled | pickled | pickled and oiled |
|---|---|---|---|
| Mill edges | Yes | Yes | Yes |
| Trimmed edges | - | Yes | Yes |
Trimmed edges available in thicknesses up to 5.0 mm.
Please contact us regarding other specifications we may have that meet your needs.
Surface aspects
| Description | Availability |
|---|---|
| Surface finish | Coils are available in non-pickled and pickled finish for most grades. For grade specific availability, please refer to the dimensional tables. |
| Oiling | Pickled finish is available with rolling or preservative oil applied. Oil weight normally 0.4-1.8 g/m2 |
Alternative oiling ranges are available.
Please contact us for details.
Certification
Test certificates 2.2/3.1 are available according to EN 10204.
EN-Product-Hot-rolled-All grades Surface aspects Supply Conditions TSUK
Supply - product conditions
Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:
| Side/surface condition | non-pickled | pickled | pickled and oiled |
|---|---|---|---|
| Mill edges | Yes | Yes | Yes |
| Trimmed edges | - | Yes | Yes |
Trimmed edges available in thicknesses up to 5.0 mm.
Please contact us regarding other specifications we may have that meet your needs.
Surface aspects
| Description | Availability |
|---|---|
| Surface finish | Coils are available in non-pickled and pickled finish for most grades. For grade specific availability, please refer to the dimensional tables. |
| Oiling | Pickled finish is available with rolling or preservative oil applied. Oil weight normally 0.4-1.8 g/m2 |
Alternative oiling ranges are available.
Please contact us for details.
Certification
Test certificates 2.2/3.1 are available according to EN 10204.
EN-Product-Hot-Rolled-Gas cylinders-P265NB-Properties TSUK
Mechanical Properties
Steel for gas cylinders has the following mechanical properties, measured transverse to the rolling direction:
| EN 10120: 2017 | Grade | P265NB |
|---|---|---|
| Min. yield strength1 ReH (N/mm²) | 265 | |
| Tensile strength Rm (N/mm²) | 410 - 500 | |
| Elongation % | t < 3 | 24 |
| t ≥ 3 | 32 |
1. Upper yield strength or 0.2% proof stress applies.
Elongation after fracture A uses test piece length L0 = 80 mm for t < 3 and L0 = 5.65√S0 for t ≥ 3.
t – material thickness in mm.
Chemical composition
Tata Steel will satisfy the following cast analysis:
| EN 10120: 2008 | Grade | P265NB |
|---|---|---|
| C | Max. | 0.19 |
| Mn | Min. | 0.40 |
| P | Max. | 0.025 |
| S | Max. | 0.015 |
| Si | Max. | 0.25 |
| Altot | Min. | 0.020 |
| N | Max. | 0.009 |
| Nb | Max. | 0.050 |
| Ti | Max. | 0.030 |
All values are in weight%.
Tata Steel does not use Cr, Cu, Mo or Ni as alloying elements for these steel grades.
EN-Product-Hot-Rolled-Gas cylinders-P265NB-Dimensions TSUK
Dimensional capability
Dimensions in mm.
| Thickness | Max. width |
|---|---|
| From - up to | P265NB |
| 2.00 - 2.60 | 1400 |
| 2.60 - 5.00 | 1530 |
The above capabilities apply to both pickled and non-pickled conditions.
The minimum width is 1000 mm.
Widths smaller than 1000 mm are available on request - please contact us.
For products produced in the Netherlands click here.
Tolerances
Tolerances for wide strip and slit wide strip comply with standard EN 10051: 2010.
Tighter tolerances are available, please contact us.
EN-Product-Hot-rolled-All grades Shape and dimensional tolerances TSUK
Shape and dimensional tolerances
The specified values for wide strip do not apply to the uncropped ends of the coil (‘head’ and ‘tail’). The length of these uncropped ends is calculated using the following formula:
length (in metres) = 90/nominal thickness (in mm), with a maximum of 20 metres.
If required, this part of the coil can be removed, however an additional cost may be charged for this.
Tolerances on thickness
Tata Steel can supply to full thickness tolerance specified in EN 10051:2010.
Tighter tolerances are available as shown below:
| Product family | Thickness tolerances available (% of full EN 10051:2010 tolerance) |
|||
|---|---|---|---|---|
| 100% | 75% | 66% | 50% | |
| Steel for forming | Yes | Yes | Yes | (see note 1) |
| High-strength low-alloy (HSLA) | Yes | Yes | Yes | Yes |
| AHSS | Yes | Yes | Yes | Yes |
| Structural steel | Yes | Yes | Yes | Yes |
| Boron manganese steel | Yes | Yes | Yes | |
| Steel for gas cylinders | Yes | |||
1 Please contact us for tolerances below 66%
Please contact us on the availability of special tolerances to meet your requirements.
Tolerances on thickness for hot-rolled steel with a low carbon content for cold forming
(DD11-DD14 in EN 10111:2008)
| Nominal thickness | Tolerances for a nominal width of | ||||
|---|---|---|---|---|---|
| ≤ 1200 | > 1200 | > 1500 | > 1800 | ||
| ≤ 1500 | ≤ 1800 | ||||
|
|
≤ 2.00 |
± 0.13 |
± 0.14 |
± 0.16 |
- |
|
> 2.00 |
≤ 2.50 |
± 0.14 |
± 0.16 |
± 0.17 |
± 0.19 |
|
> 2.50 |
≤ 3.00 |
± 0.15 |
± 0.17 |
± 0.18 |
± 0.20 |
|
> 3.00 |
≤ 4.00 |
± 0.17 |
± 0.18 |
± 0.20 |
± 0.20 |
|
> 4.00 |
≤ 5.00 |
± 0.18 |
± 0.20 |
± 0.21 |
± 0.22 |
|
> 5.00 |
≤ 6.00 |
± 0.20 |
± 0.21 |
± 0.22 |
± 0.23 |
|
> 6.00 |
≤ 8.00 |
± 0.22 |
± 0.23 |
± 0.23 |
± 0.26 |
|
> 8.00 |
≤ 11.00 |
± 0.24 |
± 0.25 |
± 0.25 |
± 0.28 |
All dimensions are mm.
Tolerances on thickness of steel grades with a specified minimum yield strength
Re ≤ 300 N/mm2 (category A)
| Nominal thickness | Tolerances for a nominal width of | ||||
|---|---|---|---|---|---|
| ≤ 1200 | > 1200 | > 1500 | > 1800 | ||
| ≤ 1500 | ≤ 1800 | ||||
|
≤ 2.00 |
± 0.17 |
± 0.19 |
± 0.21 |
- |
|
|
> 2.00 |
≤ 2.50 |
± 0.18 |
± 0.21 |
± 0.23 |
± 0.25 |
|
> 2.50 |
≤ 3.00 |
± 0.20 |
± 0.22 |
± 0.24 |
± 0.26 |
|
> 3.00 |
≤ 4.00 |
± 0.22 |
± 0.24 |
± 0.26 |
± 0.27 |
|
> 4.00 |
≤ 5.00 |
± 0.24 |
± 0.26 |
± 0.28 |
± 0.29 |
|
> 5.00 |
≤ 6.00 |
± 0.26 |
± 0.28 |
± 0.29 |
± 0.31 |
|
> 6.00 |
≤ 8.00 |
± 0.29 |
± 0.30 |
± 0.31 |
± 0.35 |
|
> 8.00 |
≤ 10.00 |
± 0.32 |
± 0.33 |
± 0.34 |
± 0.40 |
|
> 10.00 |
≤ 12.50 |
± 0.35 |
± 0.36 |
± 0.37 |
± 0.43 |
|
> 12.50 |
≤ 15.00 |
± 0.37 |
± 0.38 |
± 0.40 |
± 0.46 |
|
> 15.00 |
≤ 25.00 |
± 0.40 |
± 0.42 |
± 0.45 |
± 0.50 |
All dimensions are mm.
Tolerances on thickness of steel grades with a specified minimum yield strength
300 N/mm2 < Re ≤ 360 N/mm2 (category B)
| Nominal thickness | Tolerances for a nominal width of | ||||
|---|---|---|---|---|---|
| ≤ 1200 | > 1200 | > 1500 | > 1800 | ||
| ≤ 1500 | ≤ 1800 | ||||
|
|
≤ 2.00 |
± 0.20 |
± 0.22 |
± 0.24 |
- |
|
> 2.00 |
≤ 2.50 |
± 0.21 |
± 0.24 |
± 0.26 |
± 0.29 |
|
> 2.50 |
≤ 3.00 |
± 0.23 |
± 0.25 |
± 0.28 |
± 0.30 |
|
> 3.00 |
≤ 4.00 |
± 0.25 |
± 0.28 |
± 0.30 |
± 0.31 |
|
> 4.00 |
≤ 5.00 |
± 0.28 |
± 0.30 |
± 0.32 |
± 0.33 |
|
> 5.00 |
≤ 6.00 |
± 0.30 |
± 0.32 |
± 0.33 |
± 0.36 |
|
> 6.00 |
≤ 8.00 |
± 0.33 |
± 0.35 |
± 0.36 |
± 0.40 |
|
> 8.00 |
≤ 10.00 |
± 0.37 |
± 0.38 |
± 0.39 |
± 0.46 |
|
> 10.00 |
≤ 12.50 |
± 0.40 |
± 0.41 |
± 0.43 |
± 0.49 |
|
> 12.50 |
≤ 15.00 |
± 0.43 |
± 0.44 |
± 0.46 |
± 0.53 |
|
> 15.00 |
≤ 25.00 |
± 0.46 |
± 0.48 |
± 0.52 |
± 0.58 |
All dimensions are mm.
Tolerances on thickness of steel grades with a specified minimum yield strength
360 N/mm2 < Re ≤ 420 N/mm2 (category C)
| Nominal thickness |
Tolerances for a nominal width of |
||||
|---|---|---|---|---|---|
| ≤ 1200 | > 1200 | > 1500 | > 1800 | ||
| ≤ 1500 | ≤ 1800 | ||||
|
|
≤ 2.00 |
± 0.22 |
± 0.25 |
± 0.27 |
- |
|
> 2.00 |
≤ 2.50 |
± 0.23 |
± 0.27 |
± 0.30 |
± 0.33 |
|
> 2.50 |
≤ 3.00 |
± 0.26 |
± 0.29 |
± 0.31 |
± 0.34 |
|
> 3.00 |
≤ 4.00 |
± 0.29 |
± 0.31 |
± 0.34 |
± 0.35 |
|
> 4.00 |
≤ 5.00 |
± 0.31 |
± 0.34 |
± 0.36 |
± 0.38 |
|
> 5.00 |
≤ 6.00 |
± 0.34 |
± 0.36 |
± 0.38 |
± 0.40 |
|
> 6.00 |
≤ 8.00 |
± 0.38 |
± 0.39 |
± 0.40 |
± 0.46 |
|
> 8.00 |
≤ 10.00 |
± 0.42 |
± 0.43 |
± 0.44 |
± 0.52 |
|
> 10.00 |
≤ 12.50 |
± 0.46 |
± 0.47 |
± 0.48 |
± 0.56 |
|
> 12.50 |
≤ 15.00 |
± 0.48 |
± 0.49 |
± 0.52 |
± 0.60 |
|
> 15.00 |
≤ 25.00 |
± 0.52 |
± 0.55 |
± 0.59 |
± 0.65 |
All dimensions are mm.
Tolerances on thickness of steel grades with a specified minimum yield strength
420 N/mm2 < Re ≤ 900 N/mm2 (category D)
|
Nominal thickness |
Tolerances for a nominal width of | ||||
|---|---|---|---|---|---|
| ≤ 1200 | > 1200 | > 1500 | > 1800 | ||
| ≤ 1500 | ≤ 1800 | ||||
|
|
≤ 2.00 |
± 0.24 |
± 0.27 |
± 0.29 |
- |
|
> 2.00 |
≤ 2.50 |
± 0.25 |
± 0.29 |
± 0.32 |
± 0.35 |
|
> 2.50 |
≤ 3.00 |
± 0.28 |
± 0.31 |
± 0.34 |
± 0.36 |
|
> 3.00 |
≤ 4.00 |
± 0.31 |
± 0.34 |
± 0.36 |
± 0.38 |
|
> 4.00 |
≤ 5.00 |
± 0.34 |
± 0.36 |
± 0.39 |
± 0.41 |
|
> 5.00 |
≤ 6.00 |
± 0.36 |
± 0.39 |
± 0.41 |
± 0.43 |
|
> 6.00 |
≤ 8.00 |
± 0.41 |
± 0.42 |
± 0.43 |
± 0.49 |
|
> 8.00 |
≤ 10.00 |
± 0.45 |
± 0.46 |
± 0.48 |
± 0.56 |
|
> 10.00 |
≤ 12.50 |
± 0.49 |
± 0.50 |
± 0.52 |
± 0.60 |
|
> 12.50 |
≤ 15.00 |
± 0.52 |
± 0.53 |
± 0.56 |
± 0.64 |
|
> 15.00 |
≤ 25.00 |
± 0.56 |
± 0.59 |
± 0.63 |
± 0.70 |
All dimensions are mm.
Tolerances on width
Tolerances in mm.
| Nominal width w | ||||
|---|---|---|---|---|
| Mill edges | Trimmed edges | |||
| lower | upper | lower | upper | |
|
w ≤ 1200 |
0 |
20 |
0 |
3 |
|
1200 < w ≤ 1850 |
0 |
20 |
0 |
5 |
|
w > 1850 |
0 |
25 |
0 |
6 |
Tolerances in mm for wide strip and slit wide strip
The tolerances for wide strip and slit wide strip comply with standard EN 10051:2010.
The specified values for wide strip do not apply to the uncropped ends of the coil (‘head’ and ‘tail’). The length of these uncropped ends is calculated using the following formula:
length (in metres) = 90/nominal thickness (in mm), with a maximum of 20 metres.
If required, this part of the coil can be removed, however an additional cost may be charged for this.
Edge camber
The deviation from the edge over a length of 5000mm:
• with mill edges, no more than 20mm
• with trimmed edges, no more than 15mm
Flatness
Requirements as regards flatness can be agreed at the time of enquiry.
Option for maximum crown values
The following high crown C40 options available for hot-rolled products.
Crown values on the C20-position as well as minimum crown values on both C20 and C40 position are also available on request.
Maximum Crown C40 in µm values for hot-rolled steel with a low carbon content for cold forming
(DD11-DD14 in EN 10111:2008)
|
Category 1 |
C40 |
||||
|---|---|---|---|---|---|
| Nominal Thickness |
≤ 1200 |
> 1200 |
> 1500 |
> 1800 |
|
|
≤ 1500 |
≤ 1800 |
||||
|
> 1.47 |
≤ 2.00 |
40 |
40 |
40 |
40 |
|
> 2.00 |
≤ 2.50 |
40 |
40 |
50 |
50 |
|
> 2.50 |
≤ 3.00 |
40 |
40 |
50 |
50 |
|
> 3.00 |
≤ 6.00 |
40 |
50 |
50 |
50 |
|
> 6.00 |
≤ 11.00 |
50 |
50 |
50 |
50 |
Maximum Crown C40 in µm values of structural steel grades
(S185-S235-S275 ≤ 10mm in EN 10025-2:2004)
|
Category 2 |
C40 |
||||
|---|---|---|---|---|---|
| Nominal Thickness |
≤ 1200 |
> 1200 |
> 1500 |
> 1800 |
|
|
≤ 1500 |
≤ 1800 |
||||
|
> 1.47 |
≤ 2.00 |
40 |
40 |
40 |
40 |
|
> 2.00 |
≤ 2.50 |
40 |
40 |
50 |
50 |
|
> 2.50 |
≤ 20.00 |
50 |
50 |
50 |
50 |
Maximum Crown C40 in µm values of structural steel grades(S275 > 10mm in EN 10025-2:2004)
and HSLA grades (S315MC in EN 10149-2:1996)
|
Category 3 |
C40 |
||||
|---|---|---|---|---|---|
| Nominal Thickness |
≤ 1200 |
> 1200 |
> 1500 |
> 1800 |
|
|
≤ 1500 |
≤ 1800 |
||||
|
> 1.47 |
≤ 2.00 |
50 |
50 |
60 |
60 |
|
> 2.00 |
≤ 2.50 |
50 |
60 |
60 |
60 |
|
> 2.50 |
≤ 3.00 |
50 |
60 |
60 |
60 |
|
> 3.00 |
≤ 20.00 |
60 |
60 |
70 |
70 |
Maximum Crown C40 in µm values of HSLA grades
(S355MC, S420MC, S460MC, S500MC, S550MC in EN 10149-2:1996)
|
Category 4 |
C40 |
||||
|---|---|---|---|---|---|
| Nominal Thickness |
≤ 1200 |
> 1200 |
> 1500 |
> 1800 |
|
|
≤ 1500 |
≤ 1800 |
||||
|
> 1.47 |
≤ 2.00 |
60 |
70 |
70 |
70 |
|
> 2.00 |
≤ 2.50 |
60 |
70 |
80 |
80 |
|
> 2.50 |
≤ 3.00 |
60 |
70 |
80 |
80 |
|
> 3.00 |
≤ 5.00 |
70 |
70 |
80 |
80 |
|
> 5.00 |
≤ 20.00 |
80 |
80 |
80 |
80 |
Dimensions and coil weights
Tata Steel can supply hot-rolled steels with the following minimum and maximum dimensions and weights:
| Description | Availability |
|---|---|
| Coil diameter inner non-pickled | 762mm |
| Coil diameter inner pickled | 610mm standard |
| Tolerance on inner diameter | +0/-50mm |
| Coil diameter outer non-pickled | Outer diameter available is 10/7 x width |
| to reduce possibility of coil tipping over | |
| Max. 2200mm | |
| Min. 1050mm | |
| Coil diameter outer pickled and oiled | Outer diameter available is 10/7 x width |
| to reduce possibility of coil tipping over | |
| Outer diameter | |
| limit 2200mm | |
| Min. 1050mm | |
| Coil weight | Max. 32 tonnes |
| Additional maximum limits from transport | |
| limits and outer coil diameter | |
| Some HR products may have different | |
| coil weight ranges | |
| Minimum tonnage per order | Please refer to price list for order quantity details |
| Minimum order quantities may apply |
EN-EngineeringAutomotive-Contact-General sales TSUK
Engineering and Automotive sales
automotiveuk@tatasteeleurope.com
Tata Steel
Llanwern Works
Newport
NP19 4QZ
United Kingdom
Join the conversation with Tata Steel UK:
LinkedIn Automotive
LinkedIn Engineering
Tata Steel UK YouTube Channel