Steel for forming
Hot-rolled steel for cold forming is used for bending and deep drawing in a wide range of applications
The consistent quality of Tata Steel's forming grades ensures reliable processing. All of our forming grades have a low carbon content for excellent welding performance.
EN_US-Product-Hot-Rolled-Forming-CS TYPE A TSUK
EN_US-Product-Hot-Rolled-Forming-All grades OverviewTSUK
Overview
Hot-rolled steel for cold forming is used for bending and deep drawing in a wide range of applications.The consistent quality of Tata Steel's forming grades ensures reliable processing. All of our forming grades have a low carbon content for excellent welding performance.
Applications
- Automotive components
- Domestic appliance components
- Furniture
- Switch gear panels
- Tubes and sections
- Wheel rims
Relationship with standards
Tata Steel offers hot-rolled steel for forming in grades that comply with ASTM standards as shown in the table below.
All grades are available in qualities suitable for galvanizing.
| ASTM | SAE | JIS |
|---|---|---|
| ASTM A1011-15 | JIS G3131 | |
| ASTM A1018-16 1 | ||
| CS Type A | SAE 1008 | |
| CS Type B | SAE 1010 | SPHC |
| SPHD | ||
| CS Type B | SAE 1012 | |
| DS Type A 2 | SAE 1006 | |
| DS Type B | SAE 1006 | SPHE |
1. ASTM A1011 covers grades below 0.230 inch. ASTM A1018 covers grades greater than or equal to 0.230 inch.
2. DS Type A and ASTM A518 grades produced in the Netherlands. For further information click here.
EN_US-Product-Hot-rolled-All Grades Surface aspects Supply Conditions TSUK
Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:
| Side/surface condition | non-pickled | pickled | pickled and oiled |
|---|---|---|---|
| Mill edges | Yes | Yes | Yes |
| Trimmed edges | - | Yes | Yes |
Trimmed edges available in thicknesses up to 0.25 inch.
The steel grades shown on the following pages belong to the standard range offered by Tata Steel.
Please contact us regarding other specifications we may have that meet your needs. You can find details on how to get in touch with us in 'Contact Us' below.
Surface aspects
| Description | Availability |
|---|---|
| Surface finish | Coils are available in non-pickled and pickled finish for most grades. For grade specific availability, please refer to the dimensional tables. |
| Oiling | Pickled finish is available with rolling or preservative oil applied. Oil weight normally 55 - 275 mg/ft2 |
Alternative oiling ranges are available.
Please contact us for details. You can find details on how to get in touch with us in 'Contact Us' below.
EN_US-Product-Hot-Rolled-Forming-CS TYPE A-Properties TSUK
Properties
Mechanical properties
The typical values shown for the mechanical properties in the table below are for test pieces taken longitudinal to the rolling direction:
| Grade | ASTM A1011-15 | CS Type A |
|---|---|---|
| Yield strength | ksi | 30 - 50 |
| Elongation | % | 25 |
Min. elongation after fracture A uses test piece length L0 = 2 inches.
ASTM A1018 and SAE have no mechanical property requirements. When ordering combined ASTM / SAE specifications, the ASTM mechanical properties apply.
Chemical composition
Hot-rolled steel for forming meets the requirements of the heat analysis in the standard as shown in the table below.
| ASTM A1011-15 ASTM A1018-16 SAE 1008 |
Grade | CS type A | SAE 1008 |
|---|---|---|---|
| C | Max. | 0.10 | 0.10 |
| Mn | Max. | 0.60 | 0.50 |
| P | Max. | 0.030 | 0.030 |
| S | Max. | 0.035 | 0.035 |
All values are in weight%.
EN_US-Product-Hot-Rolled-Forming-CS TYPE AB DS TYPE B-Dimensions TSUK
Dimensions
Steel for forming is available in the following dimensions.
Dimensions in inches.
| Thickness | Max Width | ||
|---|---|---|---|
| From | Up to | Non Pickled | Pickled |
| 0.06 | 0.08 | 49 | 49 |
| 0.08 | 0.1 | 61 | 60 |
| 0.1 | 0.15 | 67 | 60 |
| 0.15 | 0.2 | 72 | 60 |
| 0.2 | 0.65 | 72 |
The minimum width is 36 inch.
Dimensions specified in ASTM A1018.
For products produced in the Netherlands click here.
Tolerances on thickness
Tolerances for wide strip and slit wide strip comply with standard ASTM A568/A568M: 2015
Tighter tolerances are available, please contact us. Tolerances are over, no under.
EN_US-Product-Hot-rolled-All grades Shape and dimensional tolerancesTSUK
Shape and dimensional tolerances
Tolerances on thickness
Tata Steel can supply to full thickness tolerance specified in ASTM A568: 2015 / A635: 2015.
Thickness tolerances over, no tolerance under.
Tighter tolerances are available as shown below:
| Carbon Steel | Thickness tolerances available | ||||
|---|---|---|---|---|---|
| ASTM A 568 (2015) / A635 (2015) | |||||
| 20 - 40 | 40 - 48 | 48 - 60 | 60 - 72 | >72 | |
| 0.031 - 0.051 | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 |
| 0.051 - 0.057 | 0.01 | 0.012 | 0.012 | 0.014 | 0.014 |
| 0.057 - 0.071 | 0.012 | 0.012 | 0.014 | 0.014 | 0.014 |
| 0.071 - 0.098 | 0.014 | 0.014 | 0.014 | 0.016 | 0.016 |
| 0.098 - 0.179 | 0.014 | 0.016 | 0.016 | 0.016 | 0.016 |
| 0.179 - 0.229 | 0.016 | 0.018 | 0.02 | 0.022 | 0.024 |
| 0.229 - 0.313 | 0.022 | 0.024 | 0.024 | 0.026 | 0.03 |
| 0.313 - 0.375 | 0.024 | 0.026 | 0.028 | 0.03 | 0.032 |
| 0.375 - 0.500 | 0.028 | 0.028 | 0.03 | 0.032 | 0.036 |
| 0.500 - 0.625 | 0.03 | 0.03 | 0.032 | 0.036 | 0.038 |
| 0.625 - 1.000 | 0.032 | 0.032 | 0.034 | 0.038 | 0.04 |
| HSLA | Thickness tolerances available | ||||||
|---|---|---|---|---|---|---|---|
| ASTM A568 (2015) / A635 (2015) | |||||||
| 20 - 32 | 32 - 40 | 40 - 48 | 48 - 60 | 60 - 72 | 72 - 80 | > 80 | |
| 0.031 - 0.051 | 0.012 | 0.012 | 0.012 | 0.012 | 0.012 | 0.012 | 0.012 |
| 0.051 - 0.059 | 0.012 | 0.012 | 0.014 | 0.014 | 0.014 | 0.014 | 0.014 |
| 0.059 - 0.070 | 0.014 | 0.014 | 0.014 | 0.014 | 0.016 | 0.016 | 0.016 |
| 0.070 - 0.082 | 0.014 | 0.014 | 0.014 | 0.014 | 0.016 | 0.016 | 0.016 |
| 0.082 - 0.098 | 0.014 | 0.016 | 0.116 | 0.016 | 0.018 | 0.018 | 0.02 |
| 0.098 - 0.179 | 0.016 | 0.016 | 0.02 | 0.02 | 0.022 | 0.024 | 0.024 |
| 0.179 - 0.229 | 0.018 | 0.018 | 0.02 | 0.02 | 0.022 | 0.024 | 0.024 |
| 0.229 - 0.313 | 0.022 | 0.022 | 0.024 | 0.024 | 0.026 | 0.03 | 0.03 |
| 0.313 - 0.375 | 0.024 | 0.024 | 0.026 | 0.028 | 0.03 | 0.032 | 0.032 |
| 0.375 - 0.500 | 0.028 | 0.028 | 0.028 | 0.03 | 0.032 | 0.036 | 0.036 |
| 0.500 - 0.625 | 0.03 | 0.03 | 0.03 | 0.032 | 0.036 | 0.038 | 0.038 |
| 0.625 - 1.000 | 0.032 | 0.032 | 0.032 | 0.034 | 0.038 | 0.04 | 0.04 |
Option for maximum crown values
At the time of ordering, specific agreements can be made on the crown of hot-rolled strip.
Tolerances on width, edge camber and flatness
Material will be supplied conforming to the tolerances specified in ASTM A568 (2015) / A635 (2015). Width tolerances are over, no tolerance under.
| Width tolerances available | ||
|---|---|---|
| Carbon steel | ASTM A568: 2015 / A635: 2015 | |
| Mill edge | Cut edge | |
| 24 - 26 | 0.812 | 0.125 |
| 26 - 28 | 0.937 | 0.125 |
| 28 - 30 | 0.937 | 0.125 |
| 30 - 35 | 1.125 | 0.187 |
| 35 - 48 | 1.125 | 0.187 |
| 48 - 50 | 1.125 | 0.25 |
| 50 - 60 | 1.5 | 0.25 |
| 60 - 65 | 1.5 | 0.312 |
| 65 - 70 | 1.5 | 0.312 |
| 70 - 78 | 1.5 | 0.312 |
| 78 - 80 | 1.875 | 0.312 |
| 80 - 82 | 1.875 | 0.375 |
| Width tolerances available | ||
|---|---|---|
| HSLA | ASTM A568: 2015 / A635: 2015 | |
| Mill edge | Cut edge | |
| 24 - 26 | 0.812 | 0.125 |
| 26 - 28 | 0.937 | 0.125 |
| 28 - 30 | 1.125 | 0.125 |
| 30 - 35 | 1.125 | 0.187 |
| 35 - 48 | 1.25 | 0.187 |
| 48 - 50 | 1.25 | 0.25 |
| 50 - 60 | 1.5 | 0.25 |
| 60 - 65 | 1.625 | 0.312 |
| 65 - 70 | 1.75 | 0.312 |
| 70 - 78 | 1.875 | 0.312 |
| 78 - 80 | 2 | 0.375 |
| 80 - 82 | 1.875 | 0.375 |
Dimensions and coil weights
Tata Steel can supply hot-rolled steels with the following minimum and maximum dimensions and weights.
| Description | Capability |
|---|---|
| Coil diameter inner non-pickled | 30 inch |
| Coil diameter inner pickled | 24 inch standard |
| 30 inch on request | |
| Tolerance on inner diameter | +0/-2 inch |
| Coil diameter outer non-pickled | Outer diameter available is 10/7 x width to reduce possibility of coil tipping over |
| Max. 86 inch | |
| Min. 41.5 inch | |
| Coil diameter outer pickled and oiled | Outer diameter available is 10/7 x width to reduce possibility of coil tipping over |
| Max. 86 inch | |
| Min. 65 inch | |
| Coil weight | Max. 75,000 lbs |
| Maximum coil weight limits can vary due to | |
| transport limits and outer coil diameter | |
| Some HR products may have different coil weight ranges | |
| Minimum tonnage per order | Refer to price list for order quantity details |
| Minimum order quantities may apply |
EN_US-Product-Hot-Rolled-Forming-CS TYPE B TSUK
EN_US-Product-Hot-Rolled-Forming-All grades OverviewTSUK
Overview
Hot-rolled steel for cold forming is used for bending and deep drawing in a wide range of applications.The consistent quality of Tata Steel's forming grades ensures reliable processing. All of our forming grades have a low carbon content for excellent welding performance.
Applications
- Automotive components
- Domestic appliance components
- Furniture
- Switch gear panels
- Tubes and sections
- Wheel rims
Relationship with standards
Tata Steel offers hot-rolled steel for forming in grades that comply with ASTM standards as shown in the table below.
All grades are available in qualities suitable for galvanizing.
| ASTM | SAE | JIS |
|---|---|---|
| ASTM A1011-15 | JIS G3131 | |
| ASTM A1018-16 1 | ||
| CS Type A | SAE 1008 | |
| CS Type B | SAE 1010 | SPHC |
| SPHD | ||
| CS Type B | SAE 1012 | |
| DS Type A 2 | SAE 1006 | |
| DS Type B | SAE 1006 | SPHE |
1. ASTM A1011 covers grades below 0.230 inch. ASTM A1018 covers grades greater than or equal to 0.230 inch.
2. DS Type A and ASTM A518 grades produced in the Netherlands. For further information click here.
EN_US-Product-Hot-rolled-All Grades Surface aspects Supply Conditions TSUK
Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:
| Side/surface condition | non-pickled | pickled | pickled and oiled |
|---|---|---|---|
| Mill edges | Yes | Yes | Yes |
| Trimmed edges | - | Yes | Yes |
Trimmed edges available in thicknesses up to 0.25 inch.
The steel grades shown on the following pages belong to the standard range offered by Tata Steel.
Please contact us regarding other specifications we may have that meet your needs. You can find details on how to get in touch with us in 'Contact Us' below.
Surface aspects
| Description | Availability |
|---|---|
| Surface finish | Coils are available in non-pickled and pickled finish for most grades. For grade specific availability, please refer to the dimensional tables. |
| Oiling | Pickled finish is available with rolling or preservative oil applied. Oil weight normally 55 - 275 mg/ft2 |
Alternative oiling ranges are available.
Please contact us for details. You can find details on how to get in touch with us in 'Contact Us' below.
EN_US-Product-Hot-Rolled-Forming-CS TYPE B-Properties TSUK
Properties
Mechanical properties
The typical values shown for the mechanical properties in the table below are for test pieces taken longitudinal to the rolling direction:
| Grade | ASTM A1011-15 | CS Type B |
|---|---|---|
| Yield strength | ksi | 30-50 |
| Elongation | % | 25 |
Min. elongation after fracture A uses test piece length L0 = 2 inches.
ASTM A1018 and SAE have no mechanical property requirements. When ordering combined ASTM / SAE specifications, the ASTM mechanical properties apply.
Chemical composition
Hot-rolled steel for forming meets the requirements of the heat analysis in the standard as shown in the table below.
Maximum values unless otherwise shown.
| ASTM A1011-15 ASTM A1018-16 SAE |
Grade | CS type B | SAE 1010 | SAE 1012 |
|---|---|---|---|---|
| C | 0.02 - 0.15 | 0.08 - 0.13 | 0.10 - 0.15 | |
| Mn | Max. | 0.60 | 0.30 - 0.60 | 0.30 - 0.60 |
| P | Max. | 0.030 | 0.030 | 0.030 |
| S | Max. | 0.035 | 0.035 | 0.035 |
All values are in weight%
EN_US-Product-Hot-Rolled-Forming-CS TYPE AB DS TYPE B-Dimensions TSUK
Dimensions
Steel for forming is available in the following dimensions.
Dimensions in inches.
| Thickness | Max Width | ||
|---|---|---|---|
| From | Up to | Non Pickled | Pickled |
| 0.06 | 0.08 | 49 | 49 |
| 0.08 | 0.1 | 61 | 60 |
| 0.1 | 0.15 | 67 | 60 |
| 0.15 | 0.2 | 72 | 60 |
| 0.2 | 0.65 | 72 |
The minimum width is 36 inch.
Dimensions specified in ASTM A1018.
For products produced in the Netherlands click here.
Tolerances on thickness
Tolerances for wide strip and slit wide strip comply with standard ASTM A568/A568M: 2015
Tighter tolerances are available, please contact us. Tolerances are over, no under.
EN_US-Product-Hot-rolled-All grades Shape and dimensional tolerancesTSUK
Shape and dimensional tolerances
Tolerances on thickness
Tata Steel can supply to full thickness tolerance specified in ASTM A568: 2015 / A635: 2015.
Thickness tolerances over, no tolerance under.
Tighter tolerances are available as shown below:
| Carbon Steel | Thickness tolerances available | ||||
|---|---|---|---|---|---|
| ASTM A 568 (2015) / A635 (2015) | |||||
| 20 - 40 | 40 - 48 | 48 - 60 | 60 - 72 | >72 | |
| 0.031 - 0.051 | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 |
| 0.051 - 0.057 | 0.01 | 0.012 | 0.012 | 0.014 | 0.014 |
| 0.057 - 0.071 | 0.012 | 0.012 | 0.014 | 0.014 | 0.014 |
| 0.071 - 0.098 | 0.014 | 0.014 | 0.014 | 0.016 | 0.016 |
| 0.098 - 0.179 | 0.014 | 0.016 | 0.016 | 0.016 | 0.016 |
| 0.179 - 0.229 | 0.016 | 0.018 | 0.02 | 0.022 | 0.024 |
| 0.229 - 0.313 | 0.022 | 0.024 | 0.024 | 0.026 | 0.03 |
| 0.313 - 0.375 | 0.024 | 0.026 | 0.028 | 0.03 | 0.032 |
| 0.375 - 0.500 | 0.028 | 0.028 | 0.03 | 0.032 | 0.036 |
| 0.500 - 0.625 | 0.03 | 0.03 | 0.032 | 0.036 | 0.038 |
| 0.625 - 1.000 | 0.032 | 0.032 | 0.034 | 0.038 | 0.04 |
| HSLA | Thickness tolerances available | ||||||
|---|---|---|---|---|---|---|---|
| ASTM A568 (2015) / A635 (2015) | |||||||
| 20 - 32 | 32 - 40 | 40 - 48 | 48 - 60 | 60 - 72 | 72 - 80 | > 80 | |
| 0.031 - 0.051 | 0.012 | 0.012 | 0.012 | 0.012 | 0.012 | 0.012 | 0.012 |
| 0.051 - 0.059 | 0.012 | 0.012 | 0.014 | 0.014 | 0.014 | 0.014 | 0.014 |
| 0.059 - 0.070 | 0.014 | 0.014 | 0.014 | 0.014 | 0.016 | 0.016 | 0.016 |
| 0.070 - 0.082 | 0.014 | 0.014 | 0.014 | 0.014 | 0.016 | 0.016 | 0.016 |
| 0.082 - 0.098 | 0.014 | 0.016 | 0.116 | 0.016 | 0.018 | 0.018 | 0.02 |
| 0.098 - 0.179 | 0.016 | 0.016 | 0.02 | 0.02 | 0.022 | 0.024 | 0.024 |
| 0.179 - 0.229 | 0.018 | 0.018 | 0.02 | 0.02 | 0.022 | 0.024 | 0.024 |
| 0.229 - 0.313 | 0.022 | 0.022 | 0.024 | 0.024 | 0.026 | 0.03 | 0.03 |
| 0.313 - 0.375 | 0.024 | 0.024 | 0.026 | 0.028 | 0.03 | 0.032 | 0.032 |
| 0.375 - 0.500 | 0.028 | 0.028 | 0.028 | 0.03 | 0.032 | 0.036 | 0.036 |
| 0.500 - 0.625 | 0.03 | 0.03 | 0.03 | 0.032 | 0.036 | 0.038 | 0.038 |
| 0.625 - 1.000 | 0.032 | 0.032 | 0.032 | 0.034 | 0.038 | 0.04 | 0.04 |
Option for maximum crown values
At the time of ordering, specific agreements can be made on the crown of hot-rolled strip.
Tolerances on width, edge camber and flatness
Material will be supplied conforming to the tolerances specified in ASTM A568 (2015) / A635 (2015). Width tolerances are over, no tolerance under.
| Width tolerances available | ||
|---|---|---|
| Carbon steel | ASTM A568: 2015 / A635: 2015 | |
| Mill edge | Cut edge | |
| 24 - 26 | 0.812 | 0.125 |
| 26 - 28 | 0.937 | 0.125 |
| 28 - 30 | 0.937 | 0.125 |
| 30 - 35 | 1.125 | 0.187 |
| 35 - 48 | 1.125 | 0.187 |
| 48 - 50 | 1.125 | 0.25 |
| 50 - 60 | 1.5 | 0.25 |
| 60 - 65 | 1.5 | 0.312 |
| 65 - 70 | 1.5 | 0.312 |
| 70 - 78 | 1.5 | 0.312 |
| 78 - 80 | 1.875 | 0.312 |
| 80 - 82 | 1.875 | 0.375 |
| Width tolerances available | ||
|---|---|---|
| HSLA | ASTM A568: 2015 / A635: 2015 | |
| Mill edge | Cut edge | |
| 24 - 26 | 0.812 | 0.125 |
| 26 - 28 | 0.937 | 0.125 |
| 28 - 30 | 1.125 | 0.125 |
| 30 - 35 | 1.125 | 0.187 |
| 35 - 48 | 1.25 | 0.187 |
| 48 - 50 | 1.25 | 0.25 |
| 50 - 60 | 1.5 | 0.25 |
| 60 - 65 | 1.625 | 0.312 |
| 65 - 70 | 1.75 | 0.312 |
| 70 - 78 | 1.875 | 0.312 |
| 78 - 80 | 2 | 0.375 |
| 80 - 82 | 1.875 | 0.375 |
Dimensions and coil weights
Tata Steel can supply hot-rolled steels with the following minimum and maximum dimensions and weights.
| Description | Capability |
|---|---|
| Coil diameter inner non-pickled | 30 inch |
| Coil diameter inner pickled | 24 inch standard |
| 30 inch on request | |
| Tolerance on inner diameter | +0/-2 inch |
| Coil diameter outer non-pickled | Outer diameter available is 10/7 x width to reduce possibility of coil tipping over |
| Max. 86 inch | |
| Min. 41.5 inch | |
| Coil diameter outer pickled and oiled | Outer diameter available is 10/7 x width to reduce possibility of coil tipping over |
| Max. 86 inch | |
| Min. 65 inch | |
| Coil weight | Max. 75,000 lbs |
| Maximum coil weight limits can vary due to | |
| transport limits and outer coil diameter | |
| Some HR products may have different coil weight ranges | |
| Minimum tonnage per order | Refer to price list for order quantity details |
| Minimum order quantities may apply |
EN_US-Product-Hot-Rolled-Forming-DS TYPE B TSUK
EN_US-Product-Hot-Rolled-Forming-All grades OverviewTSUK
Overview
Hot-rolled steel for cold forming is used for bending and deep drawing in a wide range of applications.The consistent quality of Tata Steel's forming grades ensures reliable processing. All of our forming grades have a low carbon content for excellent welding performance.
Applications
- Automotive components
- Domestic appliance components
- Furniture
- Switch gear panels
- Tubes and sections
- Wheel rims
Relationship with standards
Tata Steel offers hot-rolled steel for forming in grades that comply with ASTM standards as shown in the table below.
All grades are available in qualities suitable for galvanizing.
| ASTM | SAE | JIS |
|---|---|---|
| ASTM A1011-15 | JIS G3131 | |
| ASTM A1018-16 1 | ||
| CS Type A | SAE 1008 | |
| CS Type B | SAE 1010 | SPHC |
| SPHD | ||
| CS Type B | SAE 1012 | |
| DS Type A 2 | SAE 1006 | |
| DS Type B | SAE 1006 | SPHE |
1. ASTM A1011 covers grades below 0.230 inch. ASTM A1018 covers grades greater than or equal to 0.230 inch.
2. DS Type A and ASTM A518 grades produced in the Netherlands. For further information click here.
EN_US-Product-Hot-rolled-All Grades Surface aspects Supply Conditions TSUK
Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:
| Side/surface condition | non-pickled | pickled | pickled and oiled |
|---|---|---|---|
| Mill edges | Yes | Yes | Yes |
| Trimmed edges | - | Yes | Yes |
Trimmed edges available in thicknesses up to 0.25 inch.
The steel grades shown on the following pages belong to the standard range offered by Tata Steel.
Please contact us regarding other specifications we may have that meet your needs. You can find details on how to get in touch with us in 'Contact Us' below.
Surface aspects
| Description | Availability |
|---|---|
| Surface finish | Coils are available in non-pickled and pickled finish for most grades. For grade specific availability, please refer to the dimensional tables. |
| Oiling | Pickled finish is available with rolling or preservative oil applied. Oil weight normally 55 - 275 mg/ft2 |
Alternative oiling ranges are available.
Please contact us for details. You can find details on how to get in touch with us in 'Contact Us' below.
EN_US-Product-Hot-Rolled-Forming-DS TYPE B-Properties TSUK
Properties
Mechanical properties
The typical values shown for the mechanical properties in the table below are for test pieces taken longitudinal to the rolling direction:
| Grade | ASTM A1011-15 | DS Type B |
|---|---|---|
| Yield strength | ksi | 30 - 45 |
| Elongation | % | 28 |
Min. elongation after fracture A uses test piece length L0 = 2 inches.
ASTM A1018 and SAE have no mechanical property requirements. When ordering combined ASTM / SAE specifications, the ASTM mechanical properties apply.
Chemical composition
Hot-rolled steel for forming meets the requirements of the heat analysis in the standard as shown in the table below.
Maximum values unless otherwise shown.
| ASTM A1011-15 ASTM A1018-16 SAE |
Grade | DS Type B | SAE 1006 |
|---|---|---|---|
| C | Max. | 0.02 - 0.08 | 0.08 |
| Mn | Max. | 0.50 | 0.40 |
| P | Max. | 0.020 | 0.030 |
| S | Max. | 0.030 | 0.035 |
All values are in weight%.
EN_US-Product-Hot-Rolled-Forming-CS TYPE AB DS TYPE B-Dimensions TSUK
Dimensions
Steel for forming is available in the following dimensions.
Dimensions in inches.
| Thickness | Max Width | ||
|---|---|---|---|
| From | Up to | Non Pickled | Pickled |
| 0.06 | 0.08 | 49 | 49 |
| 0.08 | 0.1 | 61 | 60 |
| 0.1 | 0.15 | 67 | 60 |
| 0.15 | 0.2 | 72 | 60 |
| 0.2 | 0.65 | 72 |
The minimum width is 36 inch.
Dimensions specified in ASTM A1018.
For products produced in the Netherlands click here.
Tolerances on thickness
Tolerances for wide strip and slit wide strip comply with standard ASTM A568/A568M: 2015
Tighter tolerances are available, please contact us. Tolerances are over, no under.
EN_US-Product-Hot-rolled-All grades Shape and dimensional tolerancesTSUK
Shape and dimensional tolerances
Tolerances on thickness
Tata Steel can supply to full thickness tolerance specified in ASTM A568: 2015 / A635: 2015.
Thickness tolerances over, no tolerance under.
Tighter tolerances are available as shown below:
| Carbon Steel | Thickness tolerances available | ||||
|---|---|---|---|---|---|
| ASTM A 568 (2015) / A635 (2015) | |||||
| 20 - 40 | 40 - 48 | 48 - 60 | 60 - 72 | >72 | |
| 0.031 - 0.051 | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 |
| 0.051 - 0.057 | 0.01 | 0.012 | 0.012 | 0.014 | 0.014 |
| 0.057 - 0.071 | 0.012 | 0.012 | 0.014 | 0.014 | 0.014 |
| 0.071 - 0.098 | 0.014 | 0.014 | 0.014 | 0.016 | 0.016 |
| 0.098 - 0.179 | 0.014 | 0.016 | 0.016 | 0.016 | 0.016 |
| 0.179 - 0.229 | 0.016 | 0.018 | 0.02 | 0.022 | 0.024 |
| 0.229 - 0.313 | 0.022 | 0.024 | 0.024 | 0.026 | 0.03 |
| 0.313 - 0.375 | 0.024 | 0.026 | 0.028 | 0.03 | 0.032 |
| 0.375 - 0.500 | 0.028 | 0.028 | 0.03 | 0.032 | 0.036 |
| 0.500 - 0.625 | 0.03 | 0.03 | 0.032 | 0.036 | 0.038 |
| 0.625 - 1.000 | 0.032 | 0.032 | 0.034 | 0.038 | 0.04 |
| HSLA | Thickness tolerances available | ||||||
|---|---|---|---|---|---|---|---|
| ASTM A568 (2015) / A635 (2015) | |||||||
| 20 - 32 | 32 - 40 | 40 - 48 | 48 - 60 | 60 - 72 | 72 - 80 | > 80 | |
| 0.031 - 0.051 | 0.012 | 0.012 | 0.012 | 0.012 | 0.012 | 0.012 | 0.012 |
| 0.051 - 0.059 | 0.012 | 0.012 | 0.014 | 0.014 | 0.014 | 0.014 | 0.014 |
| 0.059 - 0.070 | 0.014 | 0.014 | 0.014 | 0.014 | 0.016 | 0.016 | 0.016 |
| 0.070 - 0.082 | 0.014 | 0.014 | 0.014 | 0.014 | 0.016 | 0.016 | 0.016 |
| 0.082 - 0.098 | 0.014 | 0.016 | 0.116 | 0.016 | 0.018 | 0.018 | 0.02 |
| 0.098 - 0.179 | 0.016 | 0.016 | 0.02 | 0.02 | 0.022 | 0.024 | 0.024 |
| 0.179 - 0.229 | 0.018 | 0.018 | 0.02 | 0.02 | 0.022 | 0.024 | 0.024 |
| 0.229 - 0.313 | 0.022 | 0.022 | 0.024 | 0.024 | 0.026 | 0.03 | 0.03 |
| 0.313 - 0.375 | 0.024 | 0.024 | 0.026 | 0.028 | 0.03 | 0.032 | 0.032 |
| 0.375 - 0.500 | 0.028 | 0.028 | 0.028 | 0.03 | 0.032 | 0.036 | 0.036 |
| 0.500 - 0.625 | 0.03 | 0.03 | 0.03 | 0.032 | 0.036 | 0.038 | 0.038 |
| 0.625 - 1.000 | 0.032 | 0.032 | 0.032 | 0.034 | 0.038 | 0.04 | 0.04 |
Option for maximum crown values
At the time of ordering, specific agreements can be made on the crown of hot-rolled strip.
Tolerances on width, edge camber and flatness
Material will be supplied conforming to the tolerances specified in ASTM A568 (2015) / A635 (2015). Width tolerances are over, no tolerance under.
| Width tolerances available | ||
|---|---|---|
| Carbon steel | ASTM A568: 2015 / A635: 2015 | |
| Mill edge | Cut edge | |
| 24 - 26 | 0.812 | 0.125 |
| 26 - 28 | 0.937 | 0.125 |
| 28 - 30 | 0.937 | 0.125 |
| 30 - 35 | 1.125 | 0.187 |
| 35 - 48 | 1.125 | 0.187 |
| 48 - 50 | 1.125 | 0.25 |
| 50 - 60 | 1.5 | 0.25 |
| 60 - 65 | 1.5 | 0.312 |
| 65 - 70 | 1.5 | 0.312 |
| 70 - 78 | 1.5 | 0.312 |
| 78 - 80 | 1.875 | 0.312 |
| 80 - 82 | 1.875 | 0.375 |
| Width tolerances available | ||
|---|---|---|
| HSLA | ASTM A568: 2015 / A635: 2015 | |
| Mill edge | Cut edge | |
| 24 - 26 | 0.812 | 0.125 |
| 26 - 28 | 0.937 | 0.125 |
| 28 - 30 | 1.125 | 0.125 |
| 30 - 35 | 1.125 | 0.187 |
| 35 - 48 | 1.25 | 0.187 |
| 48 - 50 | 1.25 | 0.25 |
| 50 - 60 | 1.5 | 0.25 |
| 60 - 65 | 1.625 | 0.312 |
| 65 - 70 | 1.75 | 0.312 |
| 70 - 78 | 1.875 | 0.312 |
| 78 - 80 | 2 | 0.375 |
| 80 - 82 | 1.875 | 0.375 |
Dimensions and coil weights
Tata Steel can supply hot-rolled steels with the following minimum and maximum dimensions and weights.
| Description | Capability |
|---|---|
| Coil diameter inner non-pickled | 30 inch |
| Coil diameter inner pickled | 24 inch standard |
| 30 inch on request | |
| Tolerance on inner diameter | +0/-2 inch |
| Coil diameter outer non-pickled | Outer diameter available is 10/7 x width to reduce possibility of coil tipping over |
| Max. 86 inch | |
| Min. 41.5 inch | |
| Coil diameter outer pickled and oiled | Outer diameter available is 10/7 x width to reduce possibility of coil tipping over |
| Max. 86 inch | |
| Min. 65 inch | |
| Coil weight | Max. 75,000 lbs |
| Maximum coil weight limits can vary due to | |
| transport limits and outer coil diameter | |
| Some HR products may have different coil weight ranges | |
| Minimum tonnage per order | Refer to price list for order quantity details |
| Minimum order quantities may apply |
EN_US-Product-Hot-Rolled-HSS TSUK
High-strength steel
Tata Steel’s hot-rolled high-strength, low-alloy (HSLA) grades offer formability and strength for demanding applications
The range includes Tenform® result
EN_US-Product-Hot-Rolled-Structural steel TSUK
Structural steel
The guaranteed strength and good weldability of our hot-rolled structural steel help ensure ease of processing and reliable end product performance.
EN_US-Product-Cold-rolled-Forming TSUK
Steel for forming
Cold-rolled steel for cold forming and deep drawing is available in a range of grades. Each grade is designed for particular applications – allowing you to pick the best steel for your
EN_US-Product-Metallic Coated-FormingTSUK
Steel for forming
Our cold-rolled forming steels are available in a wide range of grades and corrosion-resistant coatings. Each grade is designed for specific applications and comes with a choice of surface qua
EN_US-Tata Steel in the USA and Canada
Tata Steel in the USA and Canada
Chicago office
475 N. Martingale Road, Suite 330
Schaumburg, IL 60173
United States